Find experienced local carpenters in Templestowe

Looking for someone to install a large garage cabinet/workbench system today. The unit is mostly a simple bolt-together assembly, but the components are quite heavy. The job will likely require 2 people for lifting and positioning. All parts are new and currently in the garage, with packaging removed/ready for assembly. I have attached photos showing the unit and what the finished setup should look like. Requirements: * Assemble and bolt the cabinet/workbench together * Safely lift and position the heavy sections * Install the upper cabinets and workbench components * Ideally bring a second person if required for lifting * Must be available today

Sand and polish ~90m² Victorian Ash floors, 3 coats satin (attached), and rubbish removal. Please quote.

Carpenter to fix a water rotted pergola beam. The rotted part is mainly at the lower end going into a pocket in the brick pillar of the garage. The total beam is 5.4m long (290x45x5400) with 100mm sitting inside the brick pocket. I really want to avoid replacing the whole 5.4m piece if possible and safe to do so. There is some stair-step cracking in the bricks right next to the beam which appeared as the water rot got worse. Probably need to come and have a look to quote properly. Please indicate if you think you might be able to repair without replacing.

I want to cut back this stairs to match the width of the opening and then install a timber balustrade on the open end. Overall treads is 90cm and overall rise is 60cm.

Fix broken hinge in kitchen cabinet

Remove stains that are embedded in floor boards and fix furniture scratches

Looking for a carpenter to help with home renovation mainly for external house like fascias, etc. If interested please message. Looking for someone to assist must have own tools and can work on their own. Hourly rate provided.

Build a cupboard to bedroom with rail and shelving

Required - Frame up a 600 wall and install external James Hardie cladding to match existing add a door frame and door Put a header and cladding on a window will be a days work. All material Supplied and ready on site. Must be tooled up and skilled carpenter

Existing French door to sanded and stained/sealed

I have a very heavy concrete garden fountain. Its in two pieces, base and top. Its currently located on a timber deck and I need it moved off the deck down a small ramp and placed there as I'm having the deck refurbished. I imagine its weight is similar to a piano. Definitely a two man job. I have photos of the fountain and where it needs to be moved to. With two men and the right equipment, the job should take no longer than 20 minutes. I will need the fountain placed back on the deck when the deck is refurbished. Price can be negotiated.

Hi there, I am renovating our house. We have old timber windows - they are in a really good condition. I am looking for a carpenter or a handyman specialised in Wooden windows to get the windows sanded, change sliders of sliding windows, repair the awning windows and change the locks. Total Windows 10-15. I would appreciate if you could come and have a look and provide me a quote. I’ve added a few photos for your reference. Thank you.

Existing French door to sanded and stained/sealed

One of curved beam fell down

I have designed window shelving and day bed to be built around a window. I'd like someone with carpentry skills to buy the material, build it and paint it to completion. Total dimensions are 4440mm wide, 2400 high, 500 deep

We need a primed door with durable water resistance paint on it . Plain door and same colour as other doors but can be gloss / oil base paint if it helps to resist against humidity. Also we would like door seals on the bottoms of this door on both sides and also same door seals on both sides of the other door of one our rooms. Door should be measured in our house and this image is just an example we used as we were looking for primed doors , also better quality timber primed doors can be considered if it makes any significant difference in regarding with durability against moisture if you suggest , for up to $200 that is in Bunnings website too.

Planning to replace decking timber of two decks - and potentially replace joists too. Deck 1 - 4.2 x 4.2 M Deck 2 - Odd shaped (5.5 x 5.5 M approx) Happy to explore two options Merbu and Composite. I will supply the material. Thanks for your quote.

Planning to replace decking timber of two decks - and potentially replace joists too. Deck 1 - 4.2 x 4.2 M Deck 2 - Odd shaped (5.5 x 5.5 M approx) Happy to explore two options Merbu and Composite. I will supply the material. Thanks for your quote.

Replace rotting wood (hockey sticks and some intersecting pieces) supporting a colourbond roof that is starting to slope inwards allowing water ingress. The main diagonal beam is about 4m in length (large hockey stick you see in photos) and that main beam is about 1.5inchx3inch in size. There will likely be other work we’d need help with but needs to be discussed when on site.

3 decking boards replacing and ideally pressure washing and staining if deck