Find experienced local carpenters in Reservoir South

I have the kitchen (kit) already delivered. Kitchen will be fully removed this weekend. Looking to install new kitchen, at minimum the cabinets that are on the floor by 10/11/2024 Its not a large kitchen,

Got a tiled verandah. Going to put composite decking on it . I’m wondering if it’s a good idea to put screed ? The verandah runs on an angle roughly 20mm over 2.5 m wide Total space is 5x2.5

Builder required to build a small sized rectangular study attached to the back of the main house. Need plans drawn and submitted to Darebin City council to obtain a permit then approved works completed. Need frame complete. Plastering, Electrical etc. not required. Room will be 2m(W) x 4m(L) x 2.75m(H).

$10 for a site visit to discuss the work We have carpentry work to be done on a backyard studio pod, would like the internal to be lined in plywood. Currently being constructed, due to finish this Wednesday. 2.0 x 4.1m interior, steel frame with timber sub floor and internal dividing wall. Internals studs at 450mm centre. Ceiling slopes from 2.1 to 2.3m internally. Has one window and a sliding door to exterior. Have been looking at Plyco 9mm birch ply as a preference for interior walls, and the Plyco decopanel in 12mm for ceiling. Would like someone who can pick up the panels, cut them onsite or offsite (if possible), and install. Our priority would be: - to have this complete by the 13th December (earlier better if possible) - engage someone with experience in plywood, and knowledge to cut the sheets properly - be able to complete details near door/window/corners etc in a clean and relatively seamless manner Plan attached that shows overall dimensions as well as location of electrical cutouts. Any further info needed please don't hesitate to send me a message!

I want the right side of the shelf (with the circular cut out) sawn off, the shelf reinforced if necessary, and a pull out bin (supplied) installed on the right side. Please bring tools to complete this job. Bin and parts to secure it provided. Thanks.

To install Gable Roof shed on a concrete floor 3mx2.25m

Hello, I have a buffet in the living room and would like your help to measure, make and install custom wall shelves on top of it. The space is 30cm width and 190cm length. I attach a picture of how the space looks like, the colour of the buffet (White stained oak effect colour from IKEA) and a picture of how I would like the shelves to look like. Don't use the money I set as budget, I'm happy to get a proper quote from you. Thanks. I live in Reservoir VIC.

Hello, (price is just a reference, please provide yours) My name is Luis and I would like your help to make these shelves for that wall. I have this buffet from IKEA with the colour "White stained oak effect" so I prefer if the colour of your shelves have a very similar colour + white. https://www.ikea.com/au/en/p/besta-storage-combination-with-drawers-white-stained-oak-effect-lappviken-stubbarp-white-stained-oak-effect-s99412691 I attach a picture for your reference. Let me know if you can help me with this. I live in Reservoir. Luis

Removing the skirting to fit fridge in the cavity

Looking for someone local ish. I need someone to:     ⁃    Install the splash back. Including cutting them to size (3 panels to cut into 4 parts) and cutting out two holes for the two PowerPoints (a wall panel that’s aluminium but is something like this: https://www.ikea.com/au/en/p/lysekil-wall-panel-double-sided-white-light-grey-concrete-effect-40551684/ (https://www.ikea.com/au/en/p/lysekil-wall-panel-double-sided-white-light-grey-concrete-effect-40551684/)). The wall is not square, so need to pack out slightly to install the wall panel maybe with boards I can get.     ⁃    Install some shelving. I’ve got the brackets.     ⁃   Fix the door on the dishwasher (it fell off) and just secure the dishwasher as it’s currently a bit loose     ⁃    Install the door/drawer for the bins under the sink     ⁃    And cut to size a filler panel next to the dishwasher Thanks 😊

I need someone to:     ⁃    Install the splash back. Including cutting them to size (3 panels to cut into 4 parts) and cutting out two holes for the two PowerPoints (a wall panel that’s aluminium but is something like this: https://www.ikea.com/au/en/p/lysekil-wall-panel-double-sided-white-light-grey-concrete-effect-40551684/ (https://www.ikea.com/au/en/p/lysekil-wall-panel-double-sided-white-light-grey-concrete-effect-40551684/)). The wall is not square, so need to pack out slightly to install the wall panel.     ⁃    To cut and install shelving for the kitchen using leftover kitchen bench top. There will be three parts. (https://www.ikea.com/au/en/p/saeljan-worktop-oak-effect-laminate-40439174/P (https://www.ikea.com/au/en/p/saeljan-worktop-oak-effect-laminate-40439174/P) I’ve got the brackets.     ⁃   Fix the door on the dishwasher (it fell off)     ⁃    Fix the door/drawer for the bins under the sink (it also fell off)     ⁃    And cut to size a filler panel next to the dishwasher Thanks 😊

Home modification refer to photos

purchased property want to update cosmetic kitchen cabinets & provision for dishwasher new benches or possibly extend bench

Remove very heavy entertainment unit and keep for you to sell. Quality solid timber in great condition. Measurements 240cm long, 48cm wide, 40cm high.

We need our balcony closed of with either metal sheet or tarp so our cats are safe as were on the second floor, we do have other jobs that need doing but this is most important at the moment.

Build and install cabinet under the kitchen benchtop. Dimensions approx: 2m(w) 86cm(h) 28cm(d). Colour match with the existing cabinets

Wanting an entry way hallway table built as I can’t find one long enough online. 1500mm in length 350mm depth. Will attach inspo photo, metal legs. Send offers 😊

Install laminate benchtop in laundry. Piece of laminate is 1500 x 600 and needs to be cut down to 1261 x 590 and installed. A cut out for the sink is also required, install of the sink is not required. Can provide precise measurements at job. Thank you!

2 easy sheds to build. 1 is 1.5m x 0.8m the 2nd is 3.75m x 3m. I have all the arts and instructions. I also have the tools needed if you don't have them but would prefer someone who has the tools. Photos showing location of shed on concrete added. 2 people will be needed as a minimum.

3m x 3m gable roof flat pack shed needs constructing