Find experienced local carpenters in Alphington

Looking for someone experienced with IKEA cabinetry to assemble and securely mount three METOD cabinets in our garage. * Each cabinet: 80 cm wide × 40 cm high × 37 cm deep. * Total run: 240 cm, with six doors. * Cut and install IKEA suspension rails. * Level cabinets and ensure correct alignment (top of cupboard should be aligned to the adjacent open shelving). * Fit and adjust cupboard doors. * Check wall and supply suitable wall fixings to ensure the cupboards are securely fixed. * Confirm final position and garage-door clearance before installation. I’ll supply the cabinets, doors, hinges and the IKEA suspension rails. Please bring your own tools and supply suitable wall fixings (it’s a plasterboard wall with metal studs). Photos attached. Timing is flexible. Budget is indicative, please submit your best all-inclusive offer and share your relevant experience and availability.

Carpenter Required – Replace Damaged/Rotten Door Architrave & Timber Trim Task Description We require an experienced carpenter/handyman to repair and replace damaged timber architrave/trim around an internal doorway. Sections of the existing timber have deteriorated, particularly around the bottom corners and along the lower/side sections of the door frame. Please refer to the attached photos and measurements. Scope of works: * Remove the damaged/rotted sections of existing timber architrave/trim. * Supply and install replacement timber of a matching or closest available profile and dimensions. * Check the surrounding timber to ensure all deteriorated material is removed. * Cut and join replacement sections neatly into the existing architrave. * Fill nail holes, gaps and joins. * Sand and prepare repaired areas. * Caulk where required for a clean finish. * Prime and paint the new/repaired timber white to match the existing finish. * Remove and dispose of all damaged timber and waste. * Leave the work area clean and tidy. The attached photographs include measurements of the affected areas; however, the successful Tasker should confirm all dimensions on site before purchasing/cutting materials. We are looking for a neat, professional repair rather than a temporary patch.

I have one brand new deck that needs to be washed and stained. Then I have the existing deck that needs to be sanded back to raw and stained. Note, proper floor sanding equipment and experience required.

Hey, I’m looking at having some wooden panels installed on my walls. Thinking hardwood exterior plywood with a trim in a couple bedrooms. Looking for a quote

Stainless steel workbench needs welding on the frame to base as its come loose. 8 x 1"inch welds approximate

I need help replacing an existing integrated compact dishwasher (Smeg ST201XA) with a new unit (HV-D6FI). This is not a straight swap — the new unit has a different door/hinge setup. Photos attached show: Current Smeg installation Existing panel alignment Internal hinge/rail setup Cabinet opening ⚠️ The Challenge The existing Smeg uses a sliding-style hinge system, which allows the cabinet panel to move as the door opens. The new unit (HV-D6FI) appears to use a more standard fixed hinge setup. Because of this: The panel alignment may not match The mounting points will likely need to be redone The door swing may need adjusting to avoid hitting the cabinet base Current panel layout: Door section ~410 mm Bottom panel ~67 mm New unit appears closer to: Door section ~330 mm Larger fixed bottom section So the split between door and base shifts, which affects alignment. ✅ What I need done Remove existing dishwasher Install new unit (HV-D6FI) Modify / reposition cabinet panel to suit new hinge geometry Ensure: Clean alignment with surrounding cabinetry Smooth door opening (no rubbing/hitting) Solid mounting 🧰 Looking for someone who: Has experience with integrated dishwashers (not just freestanding installs) Understands cabinet panel fitting + hinge systems Can problem solve alignment differences Can make it look neat and intentional

We are looking for someone experienced with older windows and doors to assess and repair draught issues in our apartment. Scope of work: Approx. 12 to 15 old stained-glass / leadlight windows with gaps where air is getting in A couple of older doors also have noticeable gaps, including gaps in the middle where the doors meet We want the windows and doors checked, adjusted, sealed, and repaired where possible to reduce draughts Important: The windows are older stained-glass / leadlight style External appearance must remain unchanged due to body corporate requirements We are not looking for a modern replacement look We want a like-for-like outcome externally, with the best practical improvement to sealing and insulation Looking for someone who has experience in one or more of the following: draught sealing older windows and doors heritage window or door restoration sash window repairs leadlight / stained-glass window repairs carpentry or joinery for older doors and windows

I have a European laundry and need a bench shelf built over the washing machine and then would love the put 2-3 more shelf’s into the space above the washing machine.

Restore small deck (clean, sand, stain) including posts 1.92 x 5.10m. Will need tasker to provide stain (darker colour)

Handyman to align wooden french doors. You can see from photo the french door cant be closed properly due to misalignment/expansion.

I’m looking for a professional cleaner to remove the stain from the carpet. The stain is caused by baby’s poop. The size of the stain is within 50cm x 50 cm. Even though we have cleaned it with wipes, stain can still be found. Please find the details in the photo.

American oak table by Marc French: Has lost some of its stain/lacquer. Needs to be stripped, a few gaps filled over with wax, stained and sealed

A small patch of floorboard has stained after having a cat litter sit on top of it for a while. Regular cleaning won’t remove this. Need someone with expertise in floorboard stains or floorboard sanding to fix it.

Looking for a cabinet maker to measure and quote a study and some extra storage…

Upcycle an existing Tasmania oak shelving unit into floating timber shelves

I’m a qualified furniture maker/Cabinet Maker. Got a small workshop close to home can do pretty much anything at a timber - Due date: Flexible

I have a small piece of timber that I would like x1 long edge cut with a irregular wavey edge. To be used as a small floating timber shelf with wavey edge design. I also need x4 slim pieces sliced off the timber to be used as cuboard handles. - Due date: Flexible

One odd the purlin support beams in my roof has split and needs a piece of wood laminated to it for support. - Due date: Flexible

Needing two cabinet doors to be made and installed. White laminate. - Due date: Before Friday, 21 July 2023

The current timber casement window requires extensive repair so would like it replaced. It is approx 2100 x 600 side opening window with 1 x vertical cross beam and 1 x horizontal cross beam (4 separate glass panels). Overall window size is slightly larger. Colour needs to match body corporate requirements (classic cream). I do not know what budget to set as I am seeking advice regarding aluminium to replace the timber. The property is rented. - Due date: Flexible