Find experienced local fencing contractors in Northcote

Would appreciate 3 separate quotes for 3 units at a block of 8 flats in Northcote

I have bought the timber and need a 1.5m fence built in my front garden

Fence posts need replacing 8 in total

General fence repair and replacement of about 10-15 meters of pailing fence

We recently got our brushwood fencing repaired, but the bottom is a bit uneven. We need someone to trim the bottom of the fence (see picture for reference) to match the length of the rest of the fence. The section we need cut is only 1.6m in length. You would need to use something strong enough to cut through the wood and wire. Must suppply own tools. Power available.

I have demolished a small shed and need to relocate the remaining timber wall 1.5mtrs to the side of the metal shed. The tember wall is behind the tree fixed to posts that have cement footings.

I am interested in building a tall wooden fence at the front of my prtoperty. 920 x180. I have a hundred linear metres of salvaged spotted gum boards that i can install myself, I just need the verticle uprights installed

Fix a low brick fence approx 2m Most of the bricks still in tact and can source some additional if needed but will need all other materials No concrete foundation required The pillar will need to be resecured although it is still in one piece.

I need picket fence installed

Plywood and timber post Hoarding in Northcote construction site with black color 22 m with one double opening gate for trade entrance

I need help breaking up a tiny concrete slab measuring 60cmx40cm (10cm thick) surrounding the mains water meter, and then for a timber post to be installed- need a hole dug and and the timber post concreted in. The timber post will be for a new garden tap and for a hose reel to be mounted later on. I will supply the timber post and quick set concrete, but require you to bring your own tools. Photo shows the concrete slab and the yellow marking is where the new timber post to be installed.

Paint (using paint gun) approx. 50 lineal metres of timber paling fence - fencing 1.9m high. All fencing is relatively clear of any obstacles other than two trees - see images. Easy access to site, parking off street.

Northcote. Two fence posts are rotten and need replacing. Rest of fence ok. See photo.

Seeking a competitive quote for the supply and installation of a timber batten/slat fence at my home in Northcote, Victoria. Project details: • Style: Timber/slat fencing. Built from scratch. • Size: Approximately 5.5m wide × 2.5m high Optional extras: • Integrated door or gate (depending on cost) • Removal of existing roller door (if feasible; otherwise I’ll arrange separately)

4 PANELS FRONT FACED TO DECK GLASS AND SPIGGOTS READY TO GO IDEAL DAYS THURSDAY OR SAT FOR INSTALL but let me know when available. ONLY PLACE OFFER IF YOU HAVE EXPERIEMCE WITH GLASS POOL FENCING THX

The gate part of the front fence needs replacing. It is aprox a 3.2m section and 1.3m high picket fence. The gate is not electronic and needs to open outwards manually. Both doors have been removed. Only 1 post is needed to be replaced as one of them is a metal post on the boundary fence. Hoping to replace x1 post and salvage as much of the gates as possible.

We removed part of the paling fence to build an ensuite on the side of our house. We now need a new paling fence put back with new materials, so supply and install. 8m long, 1.9m height. There is an existing fence on either side that it will need to be joined to. The gap between the ensuite and the fence is about 10 or 20 cm, so palings will need to be nailed from the other side. There is an old water tank that will be moved before you arrive.

Need a rear fence taken down and replace. 10m length and 2.4m high.

One of the planks of wood came off our gate a while ago. We need it reattaching.

Looking to install 5 foot front fence (approx 12 m) with pedestrian gate to the front path, and motorized driveway gate. Style we are looking for is natural timber batten.