Find experienced local fencing contractors in Albert Park VIC

Replace plinth with h3 treated pine Attach wiring to timber Supply timber and fixings 1 side measures 4.3 The other side measures 4.7 Height 155

Rotting bottom kicker replace, rotting bottom rail replace. All pickets are ok, supply and install, no paint

Put a fence on my garden prevent my dogs jumping in and dig, I don’t have material provided.

I want to put a fence or something around the garden in the backyard so my dogs can’t get in and dig. Feel free to source the materials yourselves. It would be best to fully enclose the area, so my dogs can’t get in .

Looking to replace an existing side boundary fence along a laneway (about 19 metres long). Current fence is roughly 2.7m high on the laneway side and about 2.4m on my side. Happy to keep the same height/profile. Job includes: Remove and dispose of existing timber fence Supply and install new timber paling fence I’ll remove all vines/vegetation beforehand so fence will be clear and accessible. What I’m after: Total height around 2.7m from laneway side (including plinth) H4 treated pine plinth (150–200mm) 100x100 H4 posts, concreted in (around 700mm deep) Posts max 2.4m apart 3 rails minimum (prefer 4 given the height) Solid paling lower section with simple lattice or similar on top Access is a bit tight down the side but there is laneway access. Just after a clean, straight, standard job — nothing fancy. Please include removal and disposal in the quote. First two photos are the current fence, last photo is the style I’m after.Happy to consider similar simple options if there’s a better/stronger way to build it at a similar price point

Need a new gate made to replace this - size 1.99 high 0.83 wide (brick to brick) ~0.74 wide between wood frame

Remove old fence and build new fence 10m width 2.2m high, timber pailing fence

Bottom of fence is bowing out and needs to fixed so it’s straight.

I need 6 fence pallings replace; 4 x 2100 length 95 width 2 x 2100 length 145 width

Replace and install Ring gate latch on iron gate. Guessing it should be welded on or with small screw and bolts.

We have a bougainvillea creeper and the metal posts have rotted and snapped. We'd like to get them replaced to keep the creeper going.

Replace shorter fence with taller fence. Modify post height to match. First pic is current, second pic is how it needs to look to mirror the other side

I’d like to reconstruct my backyard. Could you please kindly update as soon as possible of your quote based on below parameters: PULL DOWN & REMOVAL 1) Existing Fence removal 2) you need to dispose my construction waste and garbage SUPPLY & INSTALL - Colorbond Fence (With Timber Sleeper) including: 1) 840mm x 1.80m Trim Panel sheets 2) 2.70m C-Channel Posts 3) 2.36m Railings 4) 200mm x 50mm x 2.4m Treated Pine Sleeper 5) GP Cement 20kg Bags @ 1 bag per each post 6) FENCE HEIGHT - 2.05 mtrs 7) Colour to suit the current surroundings - dark green or black SUPPLY & INSTALL - Colourbond Gate/s 1) 930mm x 1.80m (H) Colourbond Gate Kit 2) 2 x 65mm x 65mm Colourbond Gate Posts 3) GATE HEIGHT - 1.850 mtrs (or as high as the fence) 4) Standard Lok-Latch Gate Lock and Hinges incl Timing 5) Glass sunshine room cover to be fixed 6) Need to put another layer on the existing concrete surface backyard

Require a new lock for an old wrought iron gate

Small fence across a courtyard to make spa compliant with laws I will supply materials for job

Treated pine timber fence fix required. Minimal demolition (currently unfenced). Access available the entire length of the fence.

Two fence posts have broken and need replacement. Otherwise fence in good order.

I need 5 or 6 SpecRite 1800 x 902mm Pre-Oiled Merbau Alternating Slat Fence Panel to be drilled into an existing A-frame, that is between my neighbors home and mine. Total fence to be covered in approx 3.6 meters. Looking for an affordable option, simple installation. Panels & nails have been purchased. One panel may need to be cut down to fit, all other panels to be installed as they are.

Replace base board of fence

Hi there, I’m looking for someone to demolish our front fence which is rendered brick. We’re looking for this to be done within the next couple of weeks ideally. The fence is approx 600mm high, with the long section being approx 5900mm long and the shorter perpendicular section @1500mm long excluding the gate. We have obtained a permit from the Council to do this. Please see photos attached. Thanks in advance, Claire Note: thanks to all who have posted a question or offer. I forgot to mention that I would also like the footing demolished - to at least 1 foot below ground level (not actually sure how deep it is). Thanks again, Claire