Find trusted local electricians in Brunswick VIC

Looking for a handyman or tradesperson to help with several tasks around my property: Washing Machine Setup – The washing machine sits next to a cupboard which has the water inlet inside it. Need a hole drilled through the side of the cupboard to connect the washing machine to the inlet. There is a stone benchtop above the washing machine that also needs a hole drilled through it to connect to power. Electrical Work – Need additional power points installed in several rooms throughout the property. Cupboard/Joinery Work – Some internal cupboard work required inside rooms (happy to discuss specifics with the right person). Backyard Shelter/Storage – Looking to add some sort of shelter or storage solution in the backyard. Bathroom Storage – Need a storage solution added to the bathroom. Happy to have one person take on all tasks or split between specialists where needed (note: power point installation will require a licensed electrician). Please reach out with your experience, availability, and a rough quote. Photos and further details available on request.

Reverse camera has stopped working, as well as the reverse lights on the rear bar of car. - one of the tail lights (reverse light) stopped working. all are LED wired so unsure how to fix this ? looking for someone to fix this without getting ripped off

We are having a hydronic heat pump installed. It needs a 40A single phase circuit and isolator installed adjacent pump. We have a main swb( and meter), a 63A breaker feeds to Sub board 2 I plan the 40A circuit to be fed from sub board 2. I would like a 40A RCD to protect the circuit. The circuit can run in ground floor roof space (which is 2m plus high at centre, but diminishes to eaves of course). Roof is a conventional tiled roof. Needs to be complete before 22nd June, as on 22nd the heat pump install will be happening. Unit is Hydroair 22kw

Need a couple of small leaks fixed One on taps( bathroom ) And one toilet that keeps trickling water down in to bowl even when nobody flushing Also need to replace a light bulb holder / socket on ceiling

Need to complete the following: - Connect a video doorbell (existing old wired doorbell is already next to it and the new doorbell has already been mounted) - Replace 3 existing downlights with new smart downlights) Requires licensed electrician

Hi--looking for a licensed electrician to advise on the budget required to issue the electrical safety inspection certificate (for rental). *Work required* Supply and install the required labelling for the earth stake electrode Remove existing 63amp RCBO, which is in a non-compliant configuration (protecting multiple circuits) and wire supply and install 1 x 63A MCB main isolator switch (Note: existing main switch located at the front of the meter box – additional isolation required at switchboard) Replace existing circuit breakers with RCBO safety switches: Wire supply and install 1 x 10amp RCBO safety switch Wire supply and install 3 x 20amp RCBO safety switches Wire supply and install 1 x 25amp RCBO safety switches Wire supply and install 1 x 32amp RCBO safety switches Apply fire-rated silicon to all switchboard penetrations for fire sealing compliance Replace 2 x existing smoke alarms *We can supply* 1 x 63A MCB main isolator switch 3 x 20 amp RCBO safety switches 1 x 25 amp RCBO safety switches 1 x 32 amp RCBO safety switches 2 x new smoke alarms

I need a garage door cable/conduit moved. It’s currently running along the top of a fence, I’m getting the fence replaced on Monday so I’d like someone to disconnect the cable before Monday, then come back mid-late next week (flexible) once the new fence is up to re-install the cable close to the ground.

Hello, I have a small 50L Rheem hot water heater in my garage/laundry that although still works needs to be replaced as it is leaking. I have purchased a Rinnai hotlo 240v to replace it with. Pictures attached I need the current system removed and the new one set up. I'll get rid of the existing unit unless you want it :)

I have a double electrical socket - only one side works

As per request. 1-2pm today. Batteries supplied

The house is empty and accessible all hours. High ceilings. 10-12 downlights required to be switched in. Existing ones are old and don't match with each other, some are loose fitting, unsightly. Please purchase modern white simple off the shelf ones required. Also need to replace one light switch and replace a fan wall switch. Happy for you to make suggestions. Price negotiable.

Hi, I need a hanging lamp shade installed where a downlight is in my dining area

Old vintage light needs a plug and install

Need licensed electrician + to update lighting and electrical fittings + COE. Apartment in Brunswick. 1. Lighting Upgrade (21 units): * Replace existing 12V halogen globes and transformers with new integrated LED downlights - white 2. Wall plate replacements (6 switch cover plates + 15 p/point plates): from Standard Profile Fixed-Plates.

need an electrician to add a subboard with 6-7 switches for solar and battery installation

I’ve got a double power point that’s come loose from the wall — it’s not sitting flush anymore. Lately, whenever I use it, it’s been tripping the circuit breaker in the fuse box. Needs rewiring/ refitting to wall. Must be licensed A-Grade electrician.

We’re looking for a electrician to inspect and verify the electrical setup of a fermentor before switching it on. Scope of work: Check voltage and current requirements of the fermentor Confirm power outlet compatibility Ensure correct wiring and load capacity Verify safe startup conditions Advise if any modifications are required Location: Melbourne

Hi, I could smell something like burnt plastic or pot in my place so I need a certified electrician to help check if there is anything concerning and fix the issue if possible. Thank you!

My smoke alarm is beeping, I think because the batteries need replacing.

Urgently seeking someone to reposition a single PowerPoint , it needs to be moved straight up by roughly 1.5 metre. Job is in Brunswick. Flexible timing but hoping to have it done ASAP.