Find trusted local electricians in Toorak

Electrician to test, use existing on/off switch ideally and install and supply Clipsal 150mm AIRFLOW Squ are Window Exhaust fan With Auto Louvre. Window will be cut to size with hole in it

I am looking for a licensed electrician (and/or electrician with glazier experience) to supply and install a bathroom exhaust fan in an older brick apartment. Existing Conditions: * Small bathroom with no mechanical exhaust fan. * Existing bathroom window adjacent to external wall. * Window reveal has already been opened up for inspection. * Power feed appears to be accessible within the wall cavity next to the window (see photos). * Apartment currently experiences high condensation after showering. Scope of Works: * Inspect existing window and wall cavity. * Confirm suitable exhaust fan size and location. * Supply and install bathroom exhaust fan. * Connect to power in accordance with Australian Standards. * Install external grille/weatherproof vent as required. * Make good any minor finishes around installation. * Test and commission fan. Requirements: * Licensed electrician. * Please advise whether a glazier is required or whether you can complete the full installation. * Please provide your recommended fan model and expected extraction rate. * Must provide compliance certificate for electrical works. Photos attached. Please provide: 1. Fixed price quotation. 2. Estimated duration. 3. Earliest availability. 4. Confirmation of licence and insurance.

Looking for a licensed and insured electrician to decommission existing lighting and install a new light point. Scope of Work: Removal: Disconnect and remove existing strip lighting (containing 3 tubes) from the plasterboard ceiling. Disposal: Please include the disposal of the old fittings in your quote. New Installation: Install one new standard light fitting (as provided) approximately 1 meter away from the original light. (The red dot in one of the photo indicates the desired approximate location for the new fitting). Wiring: The new light should be wired to the 2 existing wall switches that are currently used to turn on/off the strip lighting altogether (circled in red in one of the attached photos). Parts: I will provide the new light fitting (see attached photos) Please include any necessary cabling or mounting hardware in your bid.

Licensed electrician required to install a ceiling light. This is a straightforward job involving the replacement of ONE light fitting only (a single Lexi Lighting fixture with multiple arms, 6 x E27). Existing wiring is already in place, and I will provide the mounting bracket, instructions, and all required bulbs. The job may involve some minor drilling into the ceiling to secure the new bracket. Scope includes removing the existing fitting, installing and mounting the new light, connecting the wiring, and testing to ensure everything is working properly. Please confirm you are a licensed electrician when quoting. If the job is done well, there is potential for further work in the future. Note: I have a ladder available.

Hi, I need a licensed electrician to wire in a replacement push button on our front stainless steel door. The previous one lasted about nine years and has now failed. I’ve measured the diameter and purchased a 16 mm, 12 V replacement switch ready for installation. Price negotiable.

Change light setting on all down lights in apartment

I need 5 power points installed in various areas like inside the change rooms (both rooms already have lights at the top) and inside shelving (shelving has one power point on the outside already for power)

electrician to relocate existing outdoor power point approx 2 meters using conduit to allow shed to be installed

Need someone to climb a ladder to change three down lights in a business ASAP

Want to install lights on the tree outside the house

Need electrician to install 30 downlights must have an account with Beacon lighting

Need a licensed electrician for a rental property: • Repair/Replace 7 Downlights • Repair/Replace Bathroom Fan: Downstairs exhaust fan not working, causing dampness. Please visit the property to provide an accurate quote if that is possible. I can arrange tenant access. Call or message me before Monday, September 22, 2025. After Monday, please communicate via the Airtasker app, as I’ll be overseas.

Currently there are plain light bulbs in the roof - I have 3 ikea pendants I’d like to replace them with - electricians only

Hi I have white PowerPoint plates on three PowerPoints and need them changed to black. I have the new black plates, they just need to be installed.

Looking for a licensed electrician to replace 3 existing ceiling lights in our home. All new light fixtures are from Beacon Lighting and are ready to go. What needs to be installed: - 1 x Elle Double 3-Light Close to Ceiling Drum Product link - 2 x Elle 3-Light 400mm Drum Flush Mount Details: - All fittings are on-site and ready to be installed - Current lights will need to be removed - Must be a licensed electrician (please confirm in your offer) - Job is located in Toorak - Ideally done Monday 4th Budget: $150 total – includes labour and removal of old fitting

I would like to run a new power cable from mains to sub board. We’ve identified a break along existing cable underground and would like to run a new cable to replace. Licensed sparky please.

We have 3 light fittings to be removed and 2 will be replaced - 1 with a down light the other light fitting

Require the following tasks to be completed for a simple kitchen renovation: Disconnect: - all appliances and make safe/capping. - roughly 6 power points - Rangehood - Cooktop - disconnect a down light & Reconnect - install cooktop. - Oven - Rangehood - 6 power points - Add light – either wall or pendant TBC Located in Hawksburn/Toorak area.

Need an electrician to remove original wall light fittings that are fixed to the wall and wired in, and install/attach two new light fittings and wire in Lights and fittings here and ready to go

I need a new power point installed in the bathroom