Find experienced local carpenters in Erskineville

Drill and Install handles, scribe and install Poly mitred bulkheads, scribe and install kickfaces, replace vanity end panel (panel supplied), install washing machine end panel in place under stone, rehang new mirror door replacement (provided)

I’m looking for an experienced carpenter or cabinet maker to install a custom timber top over an existing internal window sill in my apartment. The goal is to create a clean, modern timber window ledge/window seat similar to the reference image attached. Budget: $1,200 (Open to Offers) Scope of work * Measure on site to confirm dimensions. * Supply and install a quality timber panel (or recommend the best material). * Cut to fit the existing angled window shape. * Provide a neat 25 mm front overhang. * Finish exposed edges with matching timber edging. * Secure the panel without damaging the existing window sill. * Ensure a clean, professional finish. Approximate dimensions * Front width: 2640 mm * Back width: 2570 mm * Left side: 1120 mm * Right side: 410 mm * Front overhang: 25 mm (1 inch) (Final measurements to be confirmed on site.) Material preference Open to recommendations, but considering: * Tasmanian Oak * American Oak * Engineered timber with matching veneer Looking for a natural timber finish with a clear satin coating. Existing surface * Existing painted/plastered window sill. * Apartment is occupied. * Easy indoor access. * Job is entirely internal. Please include in your quote * Materials. * Labour. * Installation. * Any edging or finishing. * Estimated completion time. Preferred experience Looking for someone with experience in: * Custom joinery * Cabinet making * Finish carpentry Please include photos of similar work you’ve completed.

Looking for cabinet maker or experienced handyman to repair and refresh older kitchen cabinetry. Main priorities: * repair damaged cabinet sections * replace one missing drawer front * repair moisture-damaged edges * adjust and align doors/drawers * reinstall handles neatly I may later update cabinet fronts/laminate and splashback, but for now I’m looking to start with practical repairs and advice on the best facelift options using the existing kitchen. Older home with existing laminate cabinetry. Budget currently focused on repairs and refresh rather than full renovation.

The hinges on these kitchen cabinets need to be replaced.

I need X5 replacement plywood kitchen cabinet doors to be made and fitted to existing cabinets.

Need terrace balcony balustrade replaced

Design and install a small dry bar / wine display, incorporating a small wine fridge, cupboard, bench and shelves display, incorporating corner area of apartment. Looking for help designing the space. Generally flexible. Second photo is current area (with temporary ikea cabinet). Other photos are rough design ideas but are flexible and open to ideas. Please send photos of any previous similar work you have done. Thanks in advance. Will negotiate budget.

Supply and install small timber decking around existing hedges. Limited foot traffic Quick and easy job 3 x 1 x 0.25 high

Looking for a quote for someone to build and install a custom cabinet and shelving for our laundry/bathroom. Have attached a drawing of what i'm hoping for. The cupboard should have a single door, with the left half shelves, and the right half open for brooms/vacuums and a shelf at the top. Cupboard will need to have a hole cut in it to fit the existing pipe for washing machine. Then 1-2 open shelves on the right. If the style can match the bathroom sink in photo attached that would be great Happy to discuss budget options, have just put a price in to begin discussions

We've had some damage done to our wooden doorframe by a very naughty dog. I need it fixed but unfortunately I don't have the right paint to match the door frame. It looks like a white mid gloss.

I’m looking for a skilled handyman, carpenter or experienced DIYer to remove and replace the old timber floorboards on a small semi-covered balcony/sunroom area at my home in Erskineville (Inner West, Sydney). The area measures 2.61m x 2.68m (approx. 7m²) and currently has narrow timber boards that are worn and flaking. The subframe/joists appear solid and level — this job is primarily a surface board replacement. ⸻ Scope of work: ✅ Remove existing decking boards and dispose of waste ✅ Inspect joists and advise if any minor repairs are needed ✅ Supply and install new hardwood decking boards (Merbau, Spotted Gum, or similar) ✅ Secure boards with stainless steel decking screws ✅ Lightly sand surface and apply two coats of decking oil/stain for weather protection ✅ Leave the area clean and tidy ⸻ Materials: • You may supply materials (please include in quote) or I can supply — approx. 8m² hardwood decking, screws, decking oil, and brushes/rollers. • Please confirm preferred decking timber type and finish in your offer. ⸻ Access & Conditions: • Easy access via internal room to the small balcony (see photos). • Power outlet available on site. • Area is semi-covered (some weather exposure). • Parking available on street. ⸻ Timing: Flexible over the next 2–3 weeks. Ideally a one-day job (plus drying time for oil). Please include in your offer whether you can complete the job across 1 or 2 visits (for oiling/drying).

I’d like to get a quote to remove and dispose the existing hardwood decking and replace with Woodevo 140 x 25 Oak decking and aluminium supports over existing slab. Also Cover existing Planter with off cuts from the 5.4m lengths. Plus will need 3.6 + 2 x 1M capping to planter box. Attached is a plan and some pictures of the existing. There is rear lane access for a small truck like a High Ace

Have a 150cm wood top looking to cut to 130cm. Already marked out. I’d prefer to pay someone a small fee than buy the tools needed. See photos. 30mm thick. Everything under the desk will be removed by the time you arrive.

We constructed a deck in Erskineville over Christmas, client has stained the deck and messed it up. Need someone to strip old stain off deck and redo properly.

Existing piece of timber 150cm x 75cm - need it cut down by 20cm to 130cm x 75cm. I do not have a drop saw - so just looking for someone to come by with tools to make the cut. I will sand/varnish myself, and the desk will come unscrewed from the frame for easy work Location: Erskineville with visitor parking available in basement

Looking for a carpenter or handy man to supply, build and install a custom hinged wooden door for under stair case opening. Budget - open to quotes Date - flexible Wood Finish - can leave just as comes we can oil Comment with quotes. Thanks !

Looking for a chippy with tools to give us a hand replacing a deck in Erskineville. Please post your hourly rate. Please note we just need an additional hand with the job, we do have tools and materials on site. Appr. duration 4 days all up with a day off during new years day.

I need to reduce the depth of this brand new shaving cabinet. Current depth is 25 cm

I need someone who has the professional equipment to cut skirting board timber (which I have already bought) to size. This will require someone who can do a 45° angles. It is not a huge job... this is just to add to areas where we did a renovation recently. I have the measurements all done, just need someone with the equipment to cut them to size.

Seeking 1. removal of existing bench tops to replace with new ones we have already purchased, installed in u shape on existing base cabinets. The new bench top has already been cut into three pieces, but you will need to cut for the sink and stovetop. 2. Hang 60cm x 60cm IKEA wall cabinet on kitchen wall I will be here Thursday night to show you around - ideally the job would be done between Friday 15 - Saturday 16th