Find experienced local carpenters in Enmore

Looking to remove 2 Cabinets in the kitchen so that I have more fridge space. In the picture it is the 2 on the right side of the oven - one on the ground and the top attached to the wall. As I want to put a fridge next to the oven , open to offers that would include installing a barrier between the 2

Convert existing kitchen cabinet into nook (~625mm) to allow for dishwasher, including removal of bottom skirting. Remainder of kitchen cabinet to be turned into mini cupboard (~200mm) ⌀100mm hole cut-out in sidewall to allow for dishwasher connection to plumbing/power.

I have a 3m dining table that needs to be cut down to approx 1.8m

We would like to have custom fitted under stair storage and cupboard installed and made

Remove smart TV from wall mount in joinery. Remove sound bar from joinery.

Our wooden cabinet has broken it’s legs and we need it to be put back together

Wanting someone capable of making timber mini coat racks 1100mm high. Will be used in a commercial business. I’m located inner west Sydney where this needs to be supplied. At this stage I want just one. Likely to be wanting many more later on.

Looking for someone with carpentry skills and the appropriate tools to repair rotted floor joists/ beams adjoining our back door. Task is to cut out the affected section of the floor boards, repair/replace/ double up the rotted floor joists, and replace the cut out section with a piece of plywood that we will vinyl tile over. We aren’t looking for the gourmet final solution just a repair to keep us going until we renovate.

Looking for a tradie to move large metal shelf approx 1.5m+ slightly to the right as it is blocking our usage of the dishwasher. The shelf will move to the right about 6-10cm. It is currently screwed into a white tile wall and silicon on the side. We need to remove it from the wall and shift its location. Only available on Monday April 15 to complete the job Please quote

Looking for a carpenter to build a frame to support a 20mm acrylic sheet that is 2440 x 1220.. See pictures attached. Here is also a video to watch from 3min onward...https://www.youtube.com/watch?v=-xwMFERKRjI Can be built at Enmore or Woolloomooloo

Fit 316 stainless steel insect screen to existing iron security gate. Gate is two sections - a door and an upper section. Preferred approach is to rivet screen to door and upper frame section. Materials can be supplied if specialist materials not required. Dimensions are as follows: Door Section - Roughly 196cm x 75cm (measured to the outside of the door frame) Upper Section - Roughly 51cm x 80cm (measured to edges of frame) - Due date: Flexible

I have ordered a new fridge which is slightly taller than existing fridge. Hence the need for the work detailed below. 1 Remove cabinet above fridge and see pt 3. reinstall higher after installing shelves above fridge. 2. Install two shelves above the fridge approx 63.5 cm wide. 3. Reposition removed cabinet to go above newly installed shelves. Will provide materials for shelves and cover panel. Will require cutting to size. Please advise quote to do this work. Please see pic of existing cabinets. NB: Boxes will be removed from above cabinets before commencement of your works. - Due date: Before Monday, 4 December 2023

Seeking a joiner/cabinet maker to: - Assess space and recommend design for hallway cupboard and quote - Source material, build, and install cupboard Context: - Cupboard will be for linens and shoes in small hallway space next to bathroom on carpet - Would like handless white cupboards (similar to our kitchen cabinets) ideally to the ceiling but depending on cost and suitability Current measurements are 230cm (H to cornice) x 105.5cm (L) x 35.5cm (D- to door frame) Pictures to be added

For 3 x small bedrooms: Need carpets ripped out and wooden floors sanded, polished and stained to match the (darker) hallway floorboards. Room dimensions: - Main bedroom: 378 x 344 (then minus the built in wardrobe that takes up space: (238.5 x 62cm) -2nd bedroom: 2.6mtr x 3.5mtr (Then minus the built in wardrobe that takes up space) - 3rd Bedroom: 3.46m long x 2.53m wide (Then minus the built in wardrobe that takes up space) - Due date: Needs to be done on Sunday, 9 April 2023

I want to install a dishwasher in my kitchen, however will need to clear some cabinet space to make room for it. I am looking at a normal-sized dishwasher (845mm H x 600mm D x 600mm W) to be put in. Attached is a photo of the existing kitchen. - Due date: Flexible