Find a reliable appliance technician in Melbourne City CBD

Dishwasher shows F14 error    •   Unit powers on, fills with water, but does not circulate properly    •   Miele quoted relay replacement, but the part is simple to swap for someone with experience    •   Machine is integrated/sem-integrated (SCi model), but access is straightforward What I need from you:    •   Remove front kickplate    •   Access the electronics area    •   Swap out the heater relay board    •   Reassemble and test the dishwasher    •   Confirm no leaks and that unit starts a cycle Location: Melbourne CBD Parking available? Yes (if needed I can arrange access) Please only respond if you have done Miele repairs or appliance PCB swaps before. I have ordered the part directly from Miele. Thanks!

The knob of our electric Technika cooktop broke and had come completely loose. The internal rod of the knob has broken in half, one part is still stuck in the under layer of the cooktop. I believe this will require the cooktop cover to be removed to extract this broken rod. I believe the same knob can be used if a replacement rod can be found, as there was no issue with the knob itself. However, if that is not possible to reuse the knob, then a replacement part may be required.

Install one battery powered camera and one solar camera - View all the details of this offer: https://www.airtasker.com/offers/01K9TY9X4KTJNDKN0Z9W8PFWFF

We’ve got a perm machine that runs on electricity but when we assembled it the power doesn’t turn on. We’re trying to ascertain whether the current is flowing from the wall through this machine and if so to where and where does it stop?

Hi, I need help replacing the door glass on my Siemens iQ700 built-in oven with microwave function (model HM876G2B6A, 60 x 60 cm, black finish). The glass panel on the door has been damaged and needs replacement. The door is currently accessible and oven is perfectly working order (see photos). I have the oven handle as per photos but need advice if they can be used. See photo I’ll need someone who can: Supply and install the correct replacement glass panel Refit the oven handle properly Please make an offer and happy to discuss the final price Details: Brand: Siemens Model: HM876G2B6A / iQ700 Built-In Oven with Microwave Function Location: Melbourne cbd, corner of spencer st and lonsdale st. West Side Place (WSP) apartment No parking available Photos attached for reference. Itd be better if you can give me a quote in person after checking out the oven, but its not required Please provide your best offer. Please refer to the photos for more details

Install 12 CCTV Cameras. HiLook Cameras all driven using PoE power from switch via Lan Cables. I will supply Cameras and NVR box Airtaasker has to provide LAN cables. All Cameras on same floor, false ceiling, camera cables to terminate on server rack. Must be done neatly. Must bring own equipment / ladder / drill (whatever you need) Maximum 1 days job, on-site in Bourke Street Melbourne CBD. Must organize own parking. Can be done anyway of the week or weekend.

I get an error code. I suspect the drain is blocked.

We can organise 3 units in our block to have jobs done same day to save you transport time and call out fees. Downlight not working, maybe need to change fuse, and new oven light not working

Doctor Coffee - Coffee Express - H/T machine. With Milk Cooler SC10. Require installation: Water connection Water filtration kit Milk Fridge Set-up coffee menu with custom logo and coffee options Configure and test coffee with beans Ensure coffees taste great You must purchase filter system - we will pay for this separately from below job budget.

Polycool ice machine IM-75L The machine is not making ice, not cold and needs to be repaired.

Hi, this is my Blanco oven, which seems to have an electrical short. The issue happened when I tried to remove the top rack that was inserted the wrong way — it got stuck on the heating element and caused some damage. • 1st photo: Oven when it was still working • Next 2 photos: After the damage (oven not working) I’m looking for an experienced and reliable technician who can repair it safely and check for any electrical issues. My budget is A$120–A$160, and I’m located in Melbourne CBD. Available times: • Thursday, 30 Oct 2025 – between 10:00 AM – 4:00 PM • Monday, 3 Nov 2025 – between 8:00 AM – 4:00 PM Thank you Kan

Hi! I need someone to deep clean and unclog my Fisher & Paykel dishwasher. It has a strong smell and standing water that doesn’t drain properly. I already removed the top filter and propeller, but the bottom drain hole seems blocked — the water stays inside and smells like sewage.

My Haier washing machine / dryer combo doesn’t work and just flashes a wifi symbol. Preferably tonight Have tried to unplug and replug as well as click the temp+spin buttons to try get it out of that. I need this fixed ASAP

Urgent leak at brass T or PEX press connection. Pipe details 16mm, AS417:8, AS2537, adapter DN16 x 2.2 CL2/10bar. This is the first pipe from the Zip unit and supplies the whole shop. Photo and short video attached. Details Inspect and locate exact source of leak Repair or replace leaking fitting and any damaged PEX or adapter DN16 x 2.2 CL2/10bar Isolate and test supply then confirm no leaks and clean up water Provide written quote and warranty on work and parts Location City store

The fridge is making a loud noise that sounds like the internal fan is catching on something. We are a small business and need this fixed urgently but for an affordable price. I’m looking for someone experienced with fridge or appliance repairs to possibly: • Inspect and remove the back freezer panel if needed • Clear any ice or obstruction • Check or replace the fan motor if required Payment will be released once the fridge is fixed and running quietly again. If extra parts needed we will cover it I also have a video of the sound it makes.

Install LG dishwashe. Make a hole in the sink cupboard and connect water output hose and three adaptor

Had our Bosch dryer for 5 years or so, it all works fine. just not as fast or as efficient as it used to be, and never changed the filter nor do I know how to. Hoping someone can work their magic here.

LG washtower is currently on an appliance stand and doesn't seem level or stable as the machine vibrates a bit more than normal. Need help taking it off the stand and levelling it. Will probably need 2 people to move it as the machine is 128kg, and it may be worth having an appliance dolly. I have some anti vibration pads from Bunnings that can also be added.

The cooktop is a 4 burner Smeg - only one is not sparking and cannot be used. The task is for the repair of the defective burner. Flexible with the time and date but I need it done sooner than later. Melbourne CBD close to Queen Victoria Market.

Need Fisher & Paykel washing machine and condenser dryer units stacked and installed. My partner can do his best to assist lifting the dryer, but I'd prefer you bring a helper if needed. I've got the appropriate F&P brand "stacking kit with tray" that will fit both of these models, but I'm not sure if it's required. If it is, some of the overhead cabinetry might need to be removed to fit the stack.