Find an experienced gas fitter in Melbourne City CBD

Hello! I'm looking for a licensed plumber/gas fitter to disconnect a two-burner gas cooktop, sink and tap, then return to reconnect everything once I've installed a new kitchen benchtop. I am located in quite a large apartment building in the Melbourne CBD

Need someone to cut and fix a beer pipe. Job: Beer line is leaking / damaged. Need to cut out the bad section and fix/rejoin with proper fitting

Hi, I’m looking for a qualified technician to inspect and repair two issues with my gas cooktop and kitchen rangehood. 1. Gas Cooktop Ignition Issue * The ignition on the largest gas burner is not working. * The other three smaller burners are working perfectly. * Only the ignition on the largest burner needs to be inspected and repaired. 2. Rangehood Exhaust Fan Issue * Fan speed settings 1, 2, and 3 are not working. * Only the highest fan speed is functioning properly. * The fan controls need to be inspected and repaired. Location: Melbourne, VIC 3000 (Vision). I’m looking for an experienced technician who can diagnose and repair both issues. Please provide a quote, including call-out fees, labour, and any potential replacement parts. Thank you

I am in the process of starting a Minimum Stands Inspection Business A licensed electrician and gas plumber trades are required. Looking for potential work availability and interest. Not all areas have been finalised but need to start building a team.

Can you share your pricing details and suburbs you are comfortable with, especially northern suburbs such as Donnybrook, Wallan, Beveridge, Epping, Craigieburn etc.

I'm keen to understand your services, pricing and suburbs that you are comfortable to do the job. Looking for Type A gas fitters to deliver compliance for rental properties.

Gas cooktop not igniting as per photo , 1 not working can hear lighting sound, need to hold it for using. Need a repair

Need a licensed gasfitter to disconnect a near-new gas cooktop so the kitchen can be demolished. The cooktop is being kept and reinstalled into the new benchtop, so it needs to come out undamaged. Scope: Disconnect the cooktop and cap the gas line, left safe until the new kitchen goes in Remove the cooktop carefully — it's new, no scratches to the surface or trim Leave it on site, I'll wrap and store it Keep the flexible hose, clips, brackets and any fixings with the unit Second visit (quote separately if you can): Reinstall into the new benchtop once the joinery is in, reconnect and test Compliance certificate for the reconnection Details: 10th floor, lift access from ground Apartment is empty — clear run in and out Loading via the rear lane (Knox Lane); I'll confirm the strata window with you before booking Photos attached Requirements: Licensed gasfitter, licence number with your offer Own tools Flexible on timing for the disconnect. Reinstall date is a few weeks out and I'll confirm once joinery is locked in.

Problem: gas regulator not supplying correct gas pressure (see screenshot from compliance report) Job: Replace the faulty regulator with adjustable regulator replacement Faulty Location: Miele cook top

Job includes: Install a new Goldstein BQG36-X 914mm gas chargrill. Run a new gas line (approximately 2 metres) from the existing commercial gas connection to the chargrill. Connect and commission the chargrill. Pressure test for leaks. Provide a Gas Compliance Certificate on completion. Location: Little Collins Street, Melbourne VIC Budget: $600. Please quote if additional fittings or materials are required.

Hi there, I have one gas burner on my stove which doesn't seem to be receiving gas/igniting. The brand is Eurotag. Is this something you could assist with?

I am an interstate landlord who requires the mandatory gas, electrical and smoke detector safety checks completed at my 3x Melbourne rental units. 1x unit (in City Road) is due imminently and the other two (in City Road and Bundoora) are due over the coming months. I need a Victoria Government recognised service and the successful bidder will need to liaise with my managing agent for access. All testing details and certification will need to be handed over to my managing agent once available. I understand that gas and electric are on a two-year cycle whilst the smoke detectors are annually. Please provide a cost per unit for the full two-year cycle i.e. 1x gas, 1x electric and 2x smoke detector tests Please ensure that you have the recognised certification to undertake the work and that you are insured as my managing agent will require this information up front when organising access.

Just need to disconnect from gas. Connected by a hose

Looking for a licensed gas fitter to complete gas safety inspections for 13 units at one property. Requirements: • Current gas licence and all required permits. • Able to issue Gas Safety Compliance Certificates. • Reliable and experienced. Please send your licence details, quote, and availability. Looking for someone for ongoing work.

Looking for someone with an engineering, fabrication, workshop automation, or strong DIY/mechanical background to help design and build a bench-top devalving station for empty non-refillable cylinders. Purpose: safely and efficiently remove small brass threaded valves/necks from empty non-refillable cylinders such as Smartwhip-style N2O canisters, Billi/Zip tap CO2 bottles, and cream chargers, so the metal can be recycled. This is currently done manually with a rattle gun and special socket. I want to improve efficiency and safety by building a simple station where the cylinder is clamped securely and the valve area is guarded. Important: all cylinders are checked/vented before this step. This is not for gas filling, gas handling, or pressure work. It is only for mechanical removal of valves from already-checked cylinders. I still want fallback safety in case residual gas ever remains. Looking for: Bench-top/workbench-mounted fixture Rubber-lined V-cradle to hold cylinder horizontally Clamp to stop spinning/movement, ideally foot-pedal pneumatic Guide/support for rattle gun/socket alignment Valve-side capture tunnel/guard Steel/rubber/polycarbonate guarding around valve end Chute/bin for removed brass valves Faster and safer than fully manual work Main safety feature: the valve end should sit inside a capture tunnel/box. The rattle gun stays outside, with only the socket entering through an access sleeve. If a valve came loose unexpectedly, it should be contained by steel/rubber/polycarbonate guarding and directed down into a bin. Ideal person: fabrication, pneumatic clamps, workshop jigs, mechanical design, maintenance fitting, metalwork, or DIY automation experience. Please reply with your experience, how you’d approach it, whether you can work with air tools/pneumatics, rough labour/materials estimate, and any safety/efficiency suggestions. Happy to jump on a call.

Need to py Gas line for commercial oven And install some sink water

The gas cooktop (Miele) keeps ticking until we turn the power off.

Need someone to determine why leaking.supply and install correct valve

The gas cooktop does not ignite at times. When ignited and lit, once the knob is lifted, the flame turns off

Hello, we need technician to replace the gas stove nozzle and reduce the flames