Find professional window and door services in East London

I broke my VELFAC 200 SINGLE SLIDING DOOR. The hinge has come off and the slider has broken. I need someone to fix it- the slider will need a new part. Only have a photo of hinge part but other part is broken too

balcony door need fixing bracket is broken and rubber seal has come lose

I need an internal door re-hung so that it opens the opposite way (hinges on the other side). This may require repositioning hinges, latch and strike plate. Door and frame are in good condition. Please confirm if you’ve done this type of work before.

Wardrobe door need help reattaching it, screws are there, also need help with draw, everytime I push the front part/cover into the slide part of the draw it keeps coming, the person that built it, didn’t do that part right This should be a 5-10 min job, so someone local would be good.

Installing window security bar for three windows. The bars are already here. Just installing required.

I need a door removed (has smashed glass panel) and new one hung.

There is a small part broken on the door frame. The initial state that needs to be restored

I have bought 4 internal doors and hinges with handles. I need these to be installed and doors may need trimming, please contact me if you are able to help with this. Many thanks

Balcony door possibly needs replacing. The balcony door is a tilt and turn mechanism and overtime does not close properly. Videos will give a better understanding of door but can’t upload on here

Window frame in garage needs completely replacing with new wood

I want someone to help fix two brand new doors.

Replace current verisure door bell with ring wired doorbell pro

the black lining disattached from my balcony door and needs replacing It also doesn’t lock properly - smth is wrong with latch I also need someone to look at my main door to the flat as the seal seems to be broken making lots of windy noises

I need a handy man for 2 small jobs today: 1. To install a new lock on a bedroom door. I’ve tried myself however I can’t seem to get the lock and door handle to line up enough for the spindle to fit through (out by only a couple of millimetres). It may need additional carving in the slot on the side of the door to help it line up properly. The old lock has already been removed and I’ve bought the new one (see picture). 2. The sliding doors for one of the cupboards has come off its rail slightly (see picture) and is difficult to slide open and close as a result. If you could have a look and try to fix the doors back onto the rails so they move smoothly.

2 doors to be removed and replaced. Both doors need handles and hinges attached. Price stated is the amount for the job ! Hinges and door handles supplied. Not fire doors

Replace integrated freezer door

Reinstall 1 kitchen cabinet door - electrical drill is required

Looking to have cord repaired which has snapped on sash window, only on one side

3 tasks in a Newbuild flat with plasterboard balls and electrical radiators and doorbell all linked to the main electrics: I have two small Applimo electric radiators attached to the wall in two rooms that I want removed and repositioned further along the same wall. Both radiator AND the socket boxes next to them need to be moved and the gaps left behind in the plasterboard walls filled and made good (for wall painting by me at a later date). There is also a doorbell behind the entrance door to the flat which needs to be repositioned half a metre to the right of where it currently is. The repositioning of all three items is so as to make way for other wall installations to be hung i.e. mirrors, shelves etc and the current positions of these items are 'in the way!' No painting is required but holes/gaps in the walls where items are removed need to be 'made good' ready for painting at a later stage. The specific tasks are: 1. Room A - removal and repositioning of electric radiator and socket boxes further along plasterboard wall, at the same height as it is currently is and holes made good. 2. Room B - removal and repositioning of electric radiator and socket boxes further along plasterboard wall, at the same height as it is currently is and holes made good. 3. Entrance hallway - removal and repositioning of small doorbell unit further along plasterboard wall, at the same height as it is currently is and holes made good. All three items are linked to/plugged into/attached to the mains power supply and circuit switch board in store room and need to be carefully removed and repositioned. Please study pictures. Key criteria are a good smooth finish when 'making good' gaps/holes in walls and excellent electrical skills! :-)