Find a professional local handyman in Chiswick

Venetian blind with a snapped cord. This may need repairing or restringing. Attached image of what it should look like

Replace extractor fan in bathroom which has suddenly stopped working with almost identical one (already purchased). Fit water stopper under shower screen to stop leakage ( no material purchased)

Split AC system in my 3 bed flat - needs repairs Parking provided Outdoor Unit floor mounted on balcony – Easy access Indoor Units accessible but can be removed from wall System Make: Samsung (2019) Refrigerant: R410A Piping: Liquid Pipe 6.35 mm / Gas Pipe 9.52 mm Indoor Unit (4): AR09RXWSAURNEU Outdoor Unit (1): AJ070MCJ4EH/EU All Units power up and system functions. After 10 - 20 mins the Indoor Units will stop and will display the following Error Codes: Error E2 01 - Issue with one or more of the Communication Cables that run between the Indoor and Outdoor Units (F1 F2 ports) Error E5 59 - Thermistor on the Outdoor Unit may be faulty and requires replacement TASK 1 - Resolve E201 (Communication Error) Voltage test all 8 (2 cables per unit) cables at both ends (Indoor & Outdoor) to try and identify the damaged cable(s) If necessary, run new cable between the Indoor & Outdoor Units to identify the damaged cable(s) Once the damaged cable(s) have been identified, you will need to run new cable between the Indoor & Outdoor units and hide this cable as is practical. This may involve cutting holes into the suspended ceiling in order to run the cable Any Making Good is outside of scope I will provide a 50m Drum of 3183Y Cable TASK 2 - Resolve Error E5 59 (Replace Thermistor) Replace the (Supplied part DB95-05268A) Thermistor on the Outdoor Unit TASK 3 - Re-Mounting the Indoor Units I‘ve now had fitted Wardrobes installed in 3 Bedrooms Much of the air now hits the tops of the wardrobes so less effective Need to re-position these 3 Wall Units so they are 550mm from the walls We can agree brackets and materials Prep for disconnecting Indoor Units (coolant back to Outdoor Unit) Remove Wall Units from the wall Disconnect pipework and cables from Wall Units Extend pipework and cables by as needed Install wall brackets Check / Maintain each Wall Unit (Air Clean / Coil Straightening) Mount Wall Units onto brackets Re-connect pipework and cables Test system

My downstairs neigbour is complaining about a leak coming through his ceiling where my bathroom is, i’ve already called someone befofe but he couldn’t locate the issue. Need this fixed before 2pm tomorrow

The wireless blinds on my kitchen windows are broken. It seems to be a motor issue.

Install 2 vertical binlders and a bacony safe net

I have a garden office and the door on it has never worked very well and is just getting worse and worse. It keeps getting stuck shut or stuck open and I can’t close it.

Looking for a reliable handy person to help with a few jobs around the house including putting up picture frames, installing a toilet flush, and other small maintenance tasks. Hoping to find someone trustworthy, practical, and reasonably priced for ongoing bits and pieces as needed. Please message me if you are available. Thank you.

Safety net repair/replacement Mat repair

door needs to be put back on hinges as fallen off- 2 big wardrobe doors and 2 kitchen cabinets

Install a single wardrobe pole within a walk-in wardrobe + bathroom door hooks & a potential mirror.

the roman blind needs restringing since the old cord is worn out. Also the fabric lining needs a repair.

Living Room Refresh - Acton W3 I need a reliable handyman for a 1-day labor job The Scope (Top to Bottom): Ceiling: 1-2 coats of white emulsion. High Picture Rail: (already Primed with Zinsser) needs finish with White Gloss. Walls: 2 coats of Egyptian Cotton Plaster Repair: A deep section of "blown" plaster under the bay window needs to be scraped back, deep-filled using No Nonsense Basecoat (provided), and sanded perfectly smooth/flush before painting. Door & Frame: Prime with Zinsser and finish with White Gloss. (coat of Zinsser already done around door frame, door and frame above door still need doing) Skirtings : Prime with Zinsser and finish with White Gloss Note: Two dead phone/NTL sockets under the window can be removed and the holes filled over. Preparation Required (Included in Price): Protection: Laying down provided plastic sheets and masking off all windows/edges. Sanding: Sanding all walls, the pre-filled ceiling beam, and woodwork until perfectly smooth. The Bay Repair: Deep-fill repair of blown plaster under the bay window (using No Nonsense Basecoat provided). Must be chipped back, filled, and sanded perfectly flush. Corner Cracks: Rake out and use flexible caulk on vertical corner cracks to prevent re-cracking. Minor Filling: Filling any small cracks/holes found during prep What I Provide: ALL PAINT/FILL: Egyptian Cotton, White Emulsion, Zinsser, Gloss, and 10kg Basecoat filler. EQUIPMENT: I have a ladder if needed. What You Provide: Professional brushes, rollers, and sandpaper. A tidy, high-quality "one-day" finish. Budget: £250 Fixed. Please see the photos for the current state of the room and the repair area.

Mirage vertical blind (244*229 cm) (1 room) Cordless vertical blind (244*229 cm) (2 rooms)

Task: Make IKEA PAX wardrobes look built-in + install LED lighting I have installed 4 IKEA PAX wardrobe frames (2 × 75 cm and 2 × 50 cm, height 236 cm, no doors). I would like help to make them look more built-in and install LED lighting. Scope of work: 1. Built-in finish (side gaps) There is a gap of approx. 7–8 cm between the wardrobes and the wall on each side - Cut and install wooden filler panels to close these gaps - Ensure a clean, flush, built-in look (aligned with wardrobe front) - I have some leftover PAX panels that may be used, but open to better suggestions - mount to the wall / make stable - we forgot 1 panet at the bottom of one of the Pax's. Need to glue that on 2. LED lighting installation - Install COB LED strip lighting under shelves (approx. 20 shelves total) - Cut strips to size and connect properly - Install and connect power supplies (kits already purchased) - Hide cables neatly (ideally routed along side panels) - Ensure strips are not directly visible, only the light effect Important details: - Mix of 50 cm and 75 cm units - Some shelves are glass and wood, so precise placement is important - Aim is a clean, minimal, high-end “built-in wardrobe” look - Power socket available nearby Tools & requirements: - Experience with wardrobe fitting or carpentry preferred - Experience with LED strip installation - Tools for cutting wood panels and LED strips - Attention to detail for clean finishing Outcome: - Wardrobes look fully built-in (no visible side gaps) with clean, professional under-shelf lighting and no visible cables. I am providing photos of the current setup and an AI generated photo of what I am trying to achieve.

Need a 115cm Venetian blind fitted in the kitchen above the sink please

Hang mirror, hang tv, change light fixture, reinforce curtain on wall

Drawer w 95.5 x 9cm. Soft close runners

I'm looking for an experienced handyman, carpenter, or builder to complete several tasks in my flat. Please review all tasks carefully and provide a fixed total labour quote for the entire job (number of days can be estimated by you). Tasks: Replace Kitchen upper cabinet * Remove existing wall cabinet * Install new, slightly larger replacement cabinet in same location Tall kitchen cabinet – internal shelves * Measure, supply, and install approximately 6 internal shelves inside existing tall cabinet (approx. 60cm x 60cm) Pantry area – stud wall demolition and shelving * Demolish and remove a non-structural plasterboard stud wall * The wall contains electrical sockets which must be safely isolated, removed, and reinstalled or terminated safely * Safely isolate power before removing sockets * Reinstall sockets on adjacent wall * Basic finishing after wall removal (smooth edges, leave area tidy and ready for use) * Also remove table attached to the wall Pantry - Shelves * Measure, supply, and securely install shelves in pantry area after wall removal * Design: U-shaped shelving, going around the room, similar to the attached reference photo * Room size (approximate): 1.80 m × 1.40 m * Vertical coverage: Shelves from the ceiling down to around mid-height * Also install a folding table (table provided) Additional tasks * Install curtain pole into ceiling (pole provided) * Draught-proof 4 large windows (help measure, purchase, and install materials) * Install latch and handle on internal door Important details * Stud wall is confirmed NON-structural * Electrical sockets are present on the wall * I will pay for materials separately (receipts required) * Please bring your own tools * Photos available on request Quote requirements * Please provide a fixed labour price for the full scope listed above * Please confirm what is included and estimated number of days * Site visit welcome before confirming quote * Location: W4 * Parking available

Put up two small bookcases on wall, attach a frame, change pendant light fitting shade, change a bulb