Find a professional local carpenter in North London

Old kitchen removed And new kitchen installed

Build a waterproof wooden box using screws rather than glue that can easily be detached/removable to house piping for free standing bath tub taps. Dimensions of the box need to be: 35cm long, 15cm wide, 17cm tall

I need help to install a tv cabinet, a small drawer and a sofa bed.

I need the damaged base shelf of an integrated fridge-freezer housing removed and replaced. The new fridge is the same dimensions as the previous appliance, so I need the replacement shelf installed at exactly the same height/position as the existing one, properly supported and completely level. Please don’t alter the fridge recess dimensions.

I am fitting a new kitchen and I need the worktops to be fitted. They are made of Iroko wood and are in the flat already. There are 3 runs to be fitted with 2 needing to be connected together from beneath to create a seamless finish on the top (straight edge connection). The third is then on a separate side of the kitchen and will require a curved edge as it meets a curved wall. This section also has boiler pipes running along the back of the worktop so it will need to be adapted to fit this. I need holes cut out for the sink and gas hob that will be fitted in later. I also need the upstands to be fitted.

Wooden garden deck, approx. 3.5m x 3.5m, needs light sanding & painting. Job involves: * Very light manual sanding of the decking to prepare the surface (not a full strip-back) * Sweep/clean away sanding dust * Apply TWO coats of quick-drying decking stain I will provide all materials: * Decking stain, paint tray and brushes * Manual sanding pad (see photo) * Sanding paper (see photo) Please note: There is no access to electricity in the garden, so an electric sander can’t be used. Possible days/times for the job: Tuesday, 11 August, any time Wednesday, 12 August, after 11am Thursday 13 August, after 1pm Monday, 17 August, after 12:30pm

I don’t need a fridge & freezer repair. I have already installed a Bosch integrated fridge/freezer into the cabinet. I only need the kitchen cupboard doors attached and aligned to the fridge doors, including fitting the sliding or fixed-door brackets and any remaining mounting pieces. Is this a service you provide, and can you give me a fixed price before I book?

Hi I need someone who is experienced at working with fridges / freezers that are integrated into appliances. I need someone to take out / disassemble my current fridge freezer from the cupboard that it is in. Then depending on the size of that fridge freezer when I can get a true measurement of it - I might need you to do some carpentry to cut back the kitchen cupboard shelf just above the freezer to make space. I need someone with the correct tools to do a clean cut - if needed and to sand down the area / make it look decent. I need someone who is well experienced with integrated appliances and how they fit to cupboards etc. Please see the attached pics - it shows you how the fridge freezer is joined and the shelf at the top that may need to be removed / cut out. I will also have 3 x coat hanger hook rails for you to put up for me around the house.

Sand, prep and apply multiple coats of clear protection-oil to wooden front door and frame

Hi, I hope you are well. I have a gate in N20 0HD that was installed two days ago. I started the process of painting it, but realised that I have not put enough wood preservative on the gate. What I'm looking for, is someone to come and strip the stain off of the gate so that I can put more preservative on and paint it with the stain. Many thanks, Oria

First we need a level base area created for the playhouse then to build the large wooden kids playhouse in our garden.

Looking for an experienced carpenter or kitchen fitter to cover 2 white bathroom vanities (shown in photo) and a small IKEA BESTÅ wall bathroom cabinet with flexible oak tambour panels (AI image of Flutto fluted wood panels used to wrap around furniture , materials provided). The job needs accurate measuring, cutting and fitting, so experience with cabinetry kitchen fitting or furniture work is preferred. Please bring your own woodworking tools as Pavel will need to be cut with thin blade

Local handyman needed to prep and stain/varnish wooden climbing frame – North London. It’s a Backyard Discovery Lakewood wooden swing set / climbing frame which was assembled a few months ago. It now needs to be properly treated with a cedar-coloured outdoor wood stain / protector (I have the protector already). The job will need to be done over 2–3 weekday visits to allow for prep, drying time and coats, and will need to be scheduled during a run of dry weather. Visit 1 – Prep: Wash down / clean the frame with warm soapy water and a stiff brush; Rinse and allow to dry; Light sanding in key areas (handholds, ladder areas, corners etc.); Wipe away dust; Cover / protect slide and swings before staining. Visit 2 – First coat: Apply first coat of cedar wood stain / protector evenly across the frame. Visit 3 – Second coat / finishing: Apply second coat if needed / final coat for protection. Important notes: - It needs to be done during the week if possible so we can work around our son using it. - Ideally someone local who can be flexible around the weather and come back for short follow-up visits. - I have brushes and the wood stain/ protector, but please bring your own sanding materials / dust sheets / prep materials. Timing: Flexible, but ideally on weekday mornings / daytime during a spell of dry weather over the next couple of weeks. Budget: £75–£100 total..Likely only around 1–2 hours per visit over 2–3 visits

I have lots of decking and one garden fence section (see photos) that I need to have cut into pieces small enough to fit in a wood burner. Probably needs a chainsaw to get through it quickly as could then possibly cut through multiple pieces with each cut. Ill be there to help pass the wood ready to be cut and remove and stack into the wood shed (also shown). It will be necessary to gradually bring in the wood onto the patio for cutting but I can be doing this. If you need any more photos of the work area then please let me know.

I am looking for a handyman or carpenter to repair and reinforce a wooden shed doors. The doors are currently have a large gap between them. The structure itself is still in place, and I already have 3 OSB boards on site that can be used to strengthen and reinforce the doors.

Looking for a no nonsense, no fuss carpenter/handyman for roughly a days work in N17. Plane and fix hinge on 2 interior doors, fit a dishwasher panel, replace a bit of plinth, and a couple of other small bits and pieces. All materials provided.

The toe-kick/base trim board at the bottom of my kitchen cabinets has come off and is sagging/pulling away from the cabinet base. I need someone to inspect it, and replace any damaged fasteners. See attached image

The store door is on a slope and is a bespoke size approx 1.3 x 1m. We would like it to be weatherproofed and painted. We will supply ironmongery and paint.

Cabinet has spring loaded horizontal door 80 cm x 40 cm. Door is heavy and has come loose from housing

Multiple basic carpentry tasks (hanging a new internal door, fitting a door lock, hammering down old floorboards, fixing entry hall) - ideally after a carpenter whose willing to offer a day rate and up for more future work