Hire a reliable appliance service near you

Washing machine and oven need fitting

I need someone to fix an issue with washing machine it isn't old but isn't draining

I need a multi-skilled handyman, electrician, or appliance technician to help with three quick, straightforward tasks in my kitchen: 1. Dishwasher Door Repair The Job: Replace the snapped door tension cords and springs on an integrated Bosch dishwasher. Model: Bosch SMV50C00GB/18. Parts Provided: I have already purchased repair kit Note: The dishwasher will need to be slid out of its cabinet housing to access the outer side panels where the springs hook in. 2. Oven Indicator Light Fix The Job: The small orange heat-indicator light on the front control panel of the oven has slipped backward behind the stainless steel fascia. The Action: Slide the oven forward slightly, access the back of the front control panel, and clip/secure the light back into its plastic mounting hole. (No new parts are needed for this). 3. Hob Wall Switch Replacement The Job: Swap out the wall-mounted 45A hob switch because the red neon indicator light has failed. Parts Provided: I have purchased a brand-new, single-plate 45A switch with a neon light. Note: these appliances (hob and dishwasher) are part of an integrated kitchen setup

Extractor unit installation May need to cut unit to fit space Install extractor fan (recirculation)

I have the wall fixture already I just need an electrician to wire in the wire in the back of the oven and the fixture in the wall

**PLEASE ONLY APPLY IF YOU CAN HELP AND HAVE READ ALL OF THIS THANKS :)** I have a faulty cardio gym machine, I've already diagnosed it as much as possible using the manual and have diagnosed where the problem may be. I'm only looking for someone experienced who is confident on how to fix this, how to source the parts, or if you have the parts, have links, or you can repair it somehow. These parts and fixing this machine may be harder because it's an old machine so I'm not looking for a generalist unless you have specific experience with these old Matrix machines. The budget is just a random number. I'm happy to pay for your time for advice (or if you can fix it for that job) + leave you a review. Let's only chat if you are clear on this. See details below. Machine: Matrix Commercial E5x-04 Suspension Elliptical, 2013. Console model: HURE-5X-04-C The problem: The console screen is completely dead. No display, no backlight, nothing, whether on mains power or while I'm using it. What I've already checked (Matrix E5x-04 service manual): Mains socket confirmed working. The lower control board is healthy on mains power. All its status lights are normal, including the one showing it's sending power up to the console (LED9 lit) & the one showing it's communicating (LED8 blinking). Reseated the console cable at both ends. No change. Opened the console head and checked the console's own power-indicator light (LED2 on the internal board, as the manual describes). On mains power it stays dark, which means power isn't reaching the console. What this seems: Power is leaving the lower board but not arriving at the console. Both the screen and the console's power light are dead, which suggests the fault is before the console's main boards, most likely the console cable (the power & data cable running from the lower board up to the console) or the small board that cable plugs into.

I need a gas fire, flue and pipework removed. Also a radiator removed.

I need to move my dishwasher waste pipe and add a cold inlet for fridge

One of my heaters is not turning off and this continue to create unnecessary heat in the house during this summer. I need someone to fix it

Please keep all communication through the app messenger, thanks. I need an electrician to repair the cooker and to fix a Single Bed with Headboard & Storage Drawers. Electric cooker-https://www.very.co.uk/swan-sx16710b-50cm-electric-solid-plate-cooker-black/1601210766.prd?variantId=WQG1P&cm_mmc=google-_-BAU+-+Generic-_-All-_-PRODUCT_GROUP_2358978390467_[*AdID*]&utm_campaign=Generic_Electricals+-+Shopping+-+Appliances+-+MDA&utm_medium=cpc&utm_source=google&utm_term=PRODUCT_GROUP&campaigntype=generic&category=Electricals&gclsrc=aw.ds&gad_source=1&gad_campaignid=21519324959&gbraid=0AAAAAD2k1i2neBBQSq5iKYn4X6im_zhXU

Water is draining from the soap compactment instead of the drainage hose

I need and expirenced tradesmen who can help me get this nut off the angle grinder.

washing machine stopped, want somebody to suggest if it can be fixed and cost

Stanley [ST-30P-E] Pedestal Fan requires repair - it is stuck on one speed. Please note the job is for an electrician or a fan repair expert, as parts for this may not be readily available. Terms: Fix or no fees, or just a reasonable call out charge. Parkhill Road, Belsize Park, NW3 2YH. Thanks!

Hi, I need a kitchen a worktop replaced with new worktop, cut to size and cut to fit cooker hob. If you can install the hob also that would be great

Fishy smell from oven. Someone from Domex has come round to look at the oven. He said the oven works completely fine. He said he did note the fishy smell and said it could point to an issue with the main electrics but not the oven itself. He recommended for an electrician to come round and take a look at the electrics properly to make sure there isn’t a potentially dangerous fault.

Dishwasher is not draining propoerly, and control panel is glitchy. Sometimes it lets you choose a setting and runs normally, but most of the time it rejects and glitches when you choose a mode, and so it’s hard to get started

Hi, I need someone to remove a broken integrated washing machine and prepare the space for a replacement freestanding washing machine. The existing machine is an integrated Candy washing machine fitted under the kitchen worktop. Appliance installers have advised that they cannot remove the integrated unit themselves and have asked me to arrange this before they can install the new machine. The job would include: • Disconnecting and removing the existing integrated washing machine. • Checking the clearance under the worktop and removing or adjusting any trim, panel, bracket, or fitting above the machine if required to allow a standard freestanding washing machine to fit. • Taking away and disposing of the old machine. • Leaving the water, waste, and electrical connections ready for the new appliance installer. I can provide photos of the current setup below. Please let me know if this is something you can do and provide a quote if possible. Thank you.

We need to replace the rear wheel break side of the yoyo babyzen stroller, we've taken the old wheel off but can't attach the new wheel