Find a professional verandah installer near you

Hi, I am after someone with decking experience to help set up a timber deck over this existing verandah, as minimal as possible framing underneath as this is a concrete slab and I don’t want to create a large build up of the level. Please in your description tell me how you would approach this and photos of previous experience and what your price includes. It is roughly 24sqm

I need this old vinyl taken off the front fascia of the shop. The road is a clearway until 9am and we open at 11am so must be done within that time or else can be done before 7am.

Scope of work: -Supply and install a 15A weatherproof outdoor GPO (IP-rated, suitable for outdoor use) -Switchboard is located internally and less than 5m from proposed location of GPO (on opposite side of meter in photo) -Install on external wall under verandah (protected but still exposed to elements) -Ensure circuit is suitable for continuous EV charging load -Upgrade circuit/breaker if required (please advise if additional costs apply) -Test and ensure safe operation Requirements: -Must be a qualified and licensed electrician (VIC) -Must provide a Certificate of Electrical Safety (Compliance Certificate) upon completion -All work must comply with Australian standards

Have a back verandah built just need a roof put on. Roof will be tin or Perspex roughly 6m long 3m wide send a quote :)

We have bought a standard Starlink kit that needs installing

Painting above verandah on facade of house. Paint to be provided by us

I need a young guy(welder) that can help me install a steel frame. I'm the metal fabricator and need a hand to put the frame in place and would better if he understands what I'm talking. Payment will be per hour, minimum 7 hours a day per 2 days. Must have abn and release invoice

Need to install a verandah extension shed. Size 1000 mm wide and about 19000 mm long. I have attached a marked drawing for reference.

Hello, I need my back verandah levelled, waterproofed and tiled approximately 19sqm.

Build a timber frame roof over a verandah - approx 3m x 4M

Seek qualified tiler quote to apply Stellmann P4 non-slip clear according to manufacturers instructions to newly laid residence front verandah tiles. Approx 15sq m. I have purchased product and the task ready to go.

Painting of New Verandah Roof Frame. ~ 8m x 4m 1 x coat of sealer 3/4 completed. Will require this to be finished. The need to apply 2x coats of top coat. I can supply ladders and paint (Solaguard).

Enclose an area of a verandah with weatherproof board. The dimensions are a few meters by a few meters and height of approx 180cm. The quote needs to include measurement and a trip to Bunnings Newstead (15 mins away). The area will be used for temporary storage and it can be a very basic job. There are only two sides that need to be inclosed, the other two sides are part of the house. Please see attached photos. The weatherproof boards will need to be painted first with paint supplied by poster. There is a triangle area at the top of one of the sides that need to be covered with mesh attached to the ceiling and the inside of one side. This mesh will need to be purchased from Bunnings and included in the offer price. It doesn't have to be perfect, this is a job for someone that is handy and can get things done. Poster has basic tools and Bunnings can cut the weatherboard panels to size. However the job is better suited to someone that has a set of basic tools for this type of task.

I need a qualified carpenter or builder to assess and repair a main structural beam on my verandah at a Queenslander home. The beam appears to be deteriorating (possible cracking - see photos). I’m unsure if it requires repair, reinforcement, or full replacement, so I need someone experienced to:    •   Inspect the beam and confirm the issue    •   Advise on the best solution (repair vs replace)    •   Carry out the work to a safe, structural standard Details:    •   Property: 1916 Queenslander    •   Location: Coalfalls (Ipswich area)    •   Area: Verandah (external)    •   Access: Ground level access to verandah (no roof access required initially) What I’m looking for:    •   Licensed/experienced carpenter or builder    •   Experience with older timber homes / Queenslanders    •   Ability to identify structural issues (not just cosmetic fixes)    •   Must bring own tools and materials (or advise what’s needed) Please include in your offer:    •   Your experience with similar work    •   Whether you think it’s likely repairable or replacement    •   Rough approach (e.g. sistering beam, replacing section, full replacement) Timing: Flexible, but would like it assessed ASAP.

Small bathroom, verandah, kitchen including re-arranging cupboards, assemble five Ikea chairs. Type of clean: Regular Number of bedrooms: None Number of bathrooms: 1 Equipment and supplies: Tasker must provide

Repair or replace either or both of the two timber units, post and or that part of the balustrade - not sure if and what can be fixed or needs replacing altogether. Scott of work is provide advise. Time, effort and tools required for job. Anything need replacing I will reimburse separately. Cheers

Please quote for wood rot in post and beam of verandah, also bottom of a garage door. I will have a painter finish the job. Budget flexible as I’m insure of the scope of work. Thank you!

Finish Verandah. I have all materials, see photos

Infill fibro and trimming to match rest of verandah. Can quote seperate on painting whole verandah

I have four blinds I’d like attached to my back verandah. May or may not be straight forward as metal edge of pergola is thin metal and hollow behind it not solid metal. Not sure if strong enough to hold blinds. Maybe some timber behind it might give it extra support to drill into(?) Please come and have a look first if you like before submitting offer.