Find a professional verandah installer in Baulkham Hills & Hawkesbury

Re-tile an upstairs veranda at Glenhaven. The old tiles and mortar bed are already removed back to the concrete slab — it's ready for you to start. The veranda is fully under roof so it gets very little water, but it sits above a lined ceiling, so I want it membraned properly while the slab is open. Area: approx 23.6 m² — a main section 6.85 m × 3.0 m plus a return 3.76 m × 0.82 m. There is no floor waste; the deck falls off the open edge. Scope of work: Patch and repair spalled concrete around the slab edges, prepare and prime the substrate. Sand/cement screed to falls — minimum 1:100 to the open edge, no ponding. Keep total build-up to approx 20 to 40mm. Waterproof to AS 4654.2: bond breaker at all junctions, membrane over the full deck, upturns 100 mm above the finished tile level at all walls, membrane dressed into the 2 x door reveals, and a reinforced membrane collar and sealant fillet at each balustrade post — the posts are fixed through the slab. Clean down and take all rubbish away. I supply: tiles and grout. You supply and price: membrane system, primer, bond breaker, screed materials, adhesive, levelling clips, silicone. Please include in your offer: Your NSW Fair Trading licence number covering waterproofing and wall & floor tiling Current public liability insurance Photos of a previous balcony or deck you've waterproofed and tiled Your written warranty on the waterproofing Price broken into waterproofing / screed / tiling

An outside (under the rear verandah) single powerpoint fixed to the bottom of one of the verandah support posts. The power cabling will need to run up the post across to the house under verandah roof (about 1.5 metre span) all in conduit, then through the brick veneer wall and into the ceiling cavity (manhole is right there) and then join into the power supply.

I need an external powerpoint installed on a support post under the back verandah. The connection would be in the main dwelling ceiling above the laundry accessed about 4 meters away through the manhole in the laundry ceiling. The veranda attaches to the main dwelling. PowerPoint is for a water feature to be plugged into.

Need approx 35m of verandah ceiling lined with plasterboard (supplied) and trimmed with scotia or similar. No painting required. Must be willing to do an on-site inspection before giving a firm quote. Thanks!

Paint side of house and window awning and window frame. It is up to 5 metres high. Also paint verandah ceiling which is about 5 metres by 3 metres.

We have bought a standard Starlink kit that needs installing

Seek qualified tiler quote to apply Stellmann P4 non-slip clear according to manufacturers instructions to newly laid residence front verandah tiles. Approx 15sq m. I have purchased product and the task ready to go.

We have a large shrub/tree growing directly against the front verandah of our home. The shrub is currently: • Touching the gutter and roofline • Touching verandah posts and beams • Very dense internally We need it professionally pruned back to: • Create 300–500mm clearance from roof, gutters and verandah • Remove all branches touching the house • Thin out internal density for airflow • Lift the lower canopy off the ground • Remove all green waste This is primarily for pest prevention (reduce cockroaches/lizards accessing the house). Access is straightforward at the front of the property. Please bring: • Ladder suitable for single-storey roofline • Hedge trimmer / pruning equipment • Green waste removal capability Not looking for full tree removal — just proper pruning and clearance.

Wooden deck in front of the house looking faded and tired. Needs staining/painting

Seek qualified tiler quote to supply & tile home front verandah at Baulkham Hills. Verandah dim approx 6.6m x 2.0m plus 5 steps.

Pave 5 front steps and front verandah

I have a verandah with a glass fence that needs tightening. Building inspector has advised that the 2 end panels be replaces with spigots that allow the glass to be tightened between. Ive found some spigots at bunnings that have the same height from the deck to the glass. Ive included the info in pics

Replace existing fly screen with new fiberglass flyscreen Verandah is raised so a platform would be required as screen is installed from the outside of panels

I require someone to fix two of my bull nose verandah support pieces. I’m happy to get a similar piece and cut and join to existing non rotted part of the support. There is two corner pieces where the water was leaking. Leaks have been fixed. I think the size of the timber is 65mm x 150-160mm and we would probably need about 500mm lengths on each. Pl quote material and labour. Thanks

Rubber has worn out on a glass verandah needs to be replaced about 15m long in the front and 3 metres as per photo at the back

Tile a few tiles as they have fallen off

Hi guys, I need a carpenter to quote me on a minor repair to two of my timber pieces supporting the bull nose verandah. They are not load bearing but just at the corners of the verandah. One was repaired ages ago however is still need repairs due to water damage rotting the timber. The width of the timber is 65mm and height is about 200mm. I have the prop up for it while doing the repair. Pl quote for material and labour. Happy to simply replace about 1 metre on each one and rebate join with the curved piece. Quote for one and I’ll pay the second one which is identical. Thanks

Hi guys, I need someone to quote me on a minor repair to one of my timber pieces supporting the bull nose verandah. I had another one done a few years back and they cut and rebate jointed a similar size and put a metal bracket and dynabolted to bricks. The width of the timber is 65mm and height is about 200mm. I have the prop up for it while doing the repair. Pl quote for material inc bracket Thanks

Replace external gyprock on upstairs verandah, re cornice, repaint, and reconnect the 4 downlights. Area is 4.5 x 3 metres - Due date: Before Saturday, 3 February 2024

Require a licensed carpenter to carry out some repairs to an existing verandah. This particular job includes two posts (5.4m lengths) and beams in between three posts (3m each). The posts are fixed into a shoe which can be unbolted easily. Top of posts also have bolts securing. The person will need to have some props to support underneath whilst repairs are carried out. Best to do with 2 people together. I need a price on labour per day and I will pay for materials on top. Material you will be working with is structural pine. You will need to show qualification and your expertise before the job starts. - Due date: Flexible