Find experienced local tradies in Leichhardt NSW

measure and quote on a reskin for a folding arm awning

Job includes: - Rendering Blueboard / Villaboard under the roof line (requires acrylic render). - Brick patching and rendering below the sliding doors.

5 metre approx … replace canvas

Location: Leichhardt NSW 2040 Date/Time: Between 7:00 am – 10:00 am Parking: Available on street and driveway Tasks: 1. Install 2x Outdoor Awnings - Items: Instahut Window Awning Transparent PC Panel (1 m × 1.5 m and 1 m × 2 m) - Purpose: Provide shade/weather cover for bikes - Install securely on the side wall of the house (see attached photo) - Must be properly anchored into masonry to withstand wind and rain 2. Install Eufy Security eufyCam 3 4K (Add-on Camera) - Wire-free solar camera - Mount to cover the side alley with clear field of view - Ensure secure and stable positioning 3. Dismantle and Dispose of Old Wooden Table - Located in the garage (see photo) - Dismantle safely and remove from premises for disposal Requirements - Must bring own tools (including drill, masonry bits, wall plugs, screws, etc.). Ladder is available if needed. - Must be experienced with outdoor installations and safe disposal of bulky items Budget - $250 (inclusive of labour and disposal costs) - Please quote your best price and confirm availability on the specified date/time.

I need an experienced plasterer that can identify and fix a water leak under the plaster Not a huge area Please advise what you can and can’t do. Hoping to have it happen next week.

- remove damaged/moulded gyprock from roof - source and install new gyprock - need to back block the patch to avoid packing - there is a shadow line on the outer edge that needs to stay - approx 1100 x 200mm of moulded gyprock - IF ABLE: paint gyprock to match rest of roof

Someone needs to close the gap between the exhaust system and the wall that we have with some drywall.

I somewhat stupidly decided that anchor plugs in gyprock would be strong enough for a mounted TV arm, forgetting about the power of leverage with the arm extended. As a result I need the damaged gyprock repaired / patched (dont worry about painting) Also I need the tv mount/arm reinstalled - there is a gap in the studs where it needs to be installed, might need a piece of wood screwed in to bridge the gap.

Replacement of led light switches and PowerPoints, materials supplied, approx 15

Supply and install a new outdoor PowerPoint toward the front of our property on an existing circuit . House is weatherboard.

We have a power point which has come away from the wall. We need it repaired so it's back in the wall. The power still works we just need the the power point secured and the wall repaired a bit. We don't need it painted just secured and patched etc.

I have a freshly built outside wall that needs rendering on both sides. It's about 3m by 0.8m tall. Also render repair of a small area of the house wall about 60cm x 60cm. Based in Leichhardt. Painting not needed.

I need to replace the tent on my awning

Render bathroom walls and have ready for tiling

We need a balustrade to go around two sides of an outdoor landing (pictured). Total length is 2.3 metres with one right angle. All on level brickwork. Ideally it would match S/S balustrade (pictured) but different materials would be considered.

2.4m x 1.4m wall and small portion of ceiling and corner on left hand side, where the downpipe is located (see photos) to be replastered/gyprocked. Small tiled area to be removed too. Current water outlets will be moved to 50mm above floor - near drain, prior to this job. Paint and cornice not needed. Job to be completed prior to Friday 29th lunchtime, but preferably on Thursday 28th

Water damaged part of ceiling gyprock sheeting needs patching. Corner of ceiling about 1.5m x 1.5m

Move and refit existing built in wardrobe. Extend it to fit new wall length by 1 metre

Require my hair tools tagged for a job this week 5x Ghd 1 Dyson hair dryer by electrician job on Thursday I know budget isn’t huge but had them done before and only takes a few minutes each - happy to give you a hair cut as good will

Old shed (now demolished) had a 240V supply underground in a steel pipe. Currently isolated at source. We want an outdoor double power point attached the fence fed from this existing cable. I.e. In the marked up photo some sort of underground junction (green), cable and conduit to fence (yellow) and supply power point (red).