Find an experienced handyman in Maroubra

Trim approx 7.5mm off top and bottom for two internal doors. Both doors are plain white door purchased for Bunnings. Once trimmed, they will need to be hung on steel door frame (hinges already set). No painting required. Doors and handles supplied.

Put together one hip thrust machine

I’m seeking someone to install three sets of curtains from 5 minute blinds. Installation instructions - https://youtu.be/T39pdQmX4ps?si=5QUXEs9fpACg5pqP They are all full length curtains. One is 3300mm wide and the others are around 3000 and 2500. Hoping to get this done tomorrow. 😊

Hi I want to replace the door seal I found the part online see below and will purchase it. I also attach pic of model number and the cracked current seal. Make offers for the labour and let me know if you have the expertise to do it. Let me know your price and can pay you when you are here https://ebay.us/m/qJnYjC

I need an experienced person to install 2 ceiling fans with lights into my father’s small villa. There have not been any installed previously. His home is an older red brick Villa with no roof access.

Hi, I need someone to install a single wall shelf in my lock-up garage in North Randwick. 📐 THE JOB Install 5 L-brackets onto a brick wall and lay 3 timber boards across them to form a continuous shelf. Straightforward installation — all materials will be ready for you on the day. 🧱 WALL TYPE Brick wall — you'll need a hammer drill and masonry anchors/dynabolts. Please only apply if you have your own hammer drill. 📦 MATERIALS I'LL PROVIDE (already purchased from Bunnings) • 2x timber boards — 1100 x 450mm • 1x timber board — 900 x 450mm • 5x heavy-duty L-brackets — 450mm • Masonry screws/dynabolts 📏 SHELF DETAILS • Wall width: 3140mm (boards total exactly 3100mm) • Shelf height: 700mm down from ceiling (approx 2013mm from floor) • Shelf depth: 450mm • 3 boards with 2 join points 📍 BRACKET POSITIONS (important) • B1 — left end (~100mm in) • B2 — at first join point (~1100mm) • B3 — middle of centre board (~1650mm) • B4 — at second join point (~2200mm) • B5 — right end (~100mm in) A bracket must sit at each join point so both boards are supported. ✅ WHAT I'M LOOKING FOR • Experience with masonry/brick fixings • Own hammer drill • Neat and tidy work — level shelf, clean finish Should be around 1–1.5 hours for the right person. Happy to answer any questions before you apply.

the ceiling has come away from the roof. Attached to the ceiling are four motorised blinds. I need someone to unplug the motorised blinds, remove them from their brackets, reattached the ceiling panel to the roof of the apartment, rehang the blinds and reconnect the motors for those blinds. from the photos you can see I have braced the ceiling panle to prevent any furture sagging.

Demolish an old concrete awning above the main entrance of a redbrick block of 6 units. Repair any damaged bricks or mortar. Replace with a "Bahama" aluminium awning and aluminium slatted side privacy screen. (AI generated images attached). Both these items would need to be supplied. Job is through a strata manager so would need to be a certified builder and be able to provide the following: (a) Stage 1 (demolish) and Stage 2 (replacement) quotation for the awning and privacy screen, so we have the full cost of both stages. (b) A quote for the structural engineering/design compliance declarations required under the Design and Building Practitioners Act 2020 for both the demolition and the new construction. (c) Confirm whether the replacement work qualifies as exempt development or whether a Complying Development Certificate is required.

Install 5 new standard internal doors including hinges and handles/knobs

A hanging coat rack has scraped the door frame. I need to repair. Photos included

Installing self standing hanging bar

I’m looking for someone to help reinstall my X-Pole in my apartment. It’s a pressure-mounted pole (no drilling or tools required), but it has shifted slightly and is now off-centre and tilted. The job involves: • Taking down and reinstalling the pole properly • Making sure it is completely straight and secure • Using a spirit level to ensure correct alignment Should be a simple job for someone experienced with pole installation or confident following instructions carefully. I will provide a manual guide. Requirements: • Experience installing X-Poles or similar equipment preferred • Must bring a spirit level • Attention to detail to ensure it’s perfectly straight and safe Flexible with timing. Let me know if you’ve done something similar before 😊

Hang 5 prints, install 3 small blinds. Install 2 curtains, put up two small shelves

Looking for an experienced and reliable handy person to help install several items in my home. The job requires measuring, drilling into walls (including concrete), and general installation. Please bring your own tools. Jobs required: Wardrobe shelves (x2) Install two small shelves inside a wardrobe (see photos). Will require measuring, cutting the shelf material, and installing supports/brackets. I can arrange/purchase the shelf materials under your instruction if needed. Floating bedside table Install a floating bedside table (approx. 40 cm x 30 cm) onto a bedroom wall. Pin board installation Mount one pin board onto a wall. Bike rack installation Install 5 Steadyrack bike hangers onto a concrete wall in the garage(comes with what is needed).

Remove old wall mount, install new one. New one may line up with old one or might not, so may require to drill through tile.

Need help fixing a door hinge (I think someone lent on the door).

Experienced handyman with own tools to install 3 small off-the- shelf roller blinds (600mm wide) on the back of 3 bedroom doors & install 3 door stops on the floor. The floor is concrete slab with floating floorboards over the top. Need handyman between 12 to 2pm ideally on Tuesday 2nd December. We will supply the blinds and the door stops. Thank you for considering this task.

Attach a hoselink retractable hose to the brick wall. It contains the attachments in the box

A few dripping taps, a leaking shower, and fixing the sliding door, as well as attaching the bedroom door.

Hi. I need a handyman to fix a small hole (maybe 7-10cm big) in gyprock. Can you please give me a quote? Ideally, I’d like this done tomorrow but I am flexible (this weekend is good too). Thanks! I also need someone able to light sand and paint.