Find experienced local fencing contractors in Maroubra

We have a pair of Polaris 125 hinges that are about 12 years old on the pool gate… They are soft close. I think the hinges have had it. I’m looking for someone to supply and install new hinges… Needs to know what they’re doing.

Supply and install a 6.1m x 1.060m high 2 rail picket fence using 66x42mm primed treated pine rails, 66 x 18mm primed treated pine DAR square top pickets spaced at 10mm apart. 90 x 90 F7 kiln dried H4 treated pine posts concreted in ground at 600mm depth and all galvanized fasters. Include demolition and removal of existing fence. Painting of new fence in Monument. Please supply a quote.

It is an old worn out fence, but the posts are still good. I want to remove the old steel rope, sand the posts, replace the top rail, stain the wood and re wire the fence

Looking for an experienced installer to help set up a sliding gate at the front of my driveway in Maroubra. Currently no gate installed. Opening is approx. 3 m. Driveway has concrete slab with brick post on each side. To slide onto the hedge side. Scope of work: * Install posts (or use existing if suitable) * Install and align sliding gate track * Mount sliding gate (gate can be purchase based on your advice) * Ensure gate runs smoothly and is level * Install automatic gate opener (solar or battery kit) (please quote separately) * Advice on best budget setup Notes: * Access is straightforward * Prefer someone with previous sliding gate experience * Please include photos of similar jobs if possible Budget: Open to quotes (looking for a cost-effective solution) Location: Maroubra NSW When: Looking to be installed around 1 May. Note: Happy to assist on the day to reduce labour time/cost.

We need a new fence. The current white fence + gate is wooden and rotting. We are looking for an aluminium fence to replace what is currently there. Specifications: • Section: Front • Double gate style: Horizontal aluminium slats • Double gate hardware: Ikonic Black Matte Digital Entry Lock, Rising hinge for big gate and self closing hinge for small gate • Slat size: 90x16mm • Gap: 15mm • Height: 1800H • Width: 3990W (2990W + 1000W) • Colour: Pearl white • Post size: 100mm steel • Post Qty: 2x • Fixings: All required screws and fittings Removal of old fence and gate.

Install baby gate (drill needed). Retractable baby gate to be installed on an angle between two brick walls

Build fence and gates at the front of the house, for both me and my neighbour, in duplex property. 120 cm height. Driveway gate (sliding), please quote for both motorised and manual. See before and after photos. Measurements: A: 1.45 m B: 4.00 m C: 3.70 m D: 7.30 m

Rebuild / repair brick fence of driveway

Repair wooden fence and put back up

Need a gate installed in the side passageway similar to the one shown in the picture At the other end.

Hello, I'm looking for quotes to supply and install a pedestrian gate and small fence between our concrete wall posts. Preferably looking for aluminium/colourbond slat gate and fence in colourbond woodland grey colour. Please see below for measurements but I would be keen for the measurements to be done by yourself in case these are not quite accurate. Please quote price. Gate space is 99cm width 133cm Height Fence is 74cm height 175cm width

Install 17m of Outdoor Panels on existing timber fence: 1. Remove lightweight white corrugated fence covers. 2. Supply and Install any required joists on timber fence 2. Cut to size Outdoor Panels (supplied by me). Each panel is 2.9m by 200mm. https://delacopanels.com.au/products/white-outdoor-panel. The desired height is 2.4m. 3. Install Panels and a trim on top of the panels using screws. Need supply of screws (depending on joists used).

Need to extend the fence to make it 1.8M high. Currently it is around 1.5M. Length is around 30m

We need 120 l/m of temporary fence dismantled and stacked neatly at Maroubra Junction Public School on 13th October

Broken gate latch as shown. Needs replacement with alternative and sturdier mechanism. Seeking recommendations and installation.

ATF panels/temporary fence hire needed this afternoon/tonight for 2-3 days in Maroubra. 16m

I have 3 panels to be installed on the side of my veranda. I have the panels and most of the things needed just need labour

Need 2 fence panels replaced urgently

Need to have an extension installed at top of fence for pool compliance. Either wood or perspex about 30cm high by 3m length. Licensed carpenter preferred. Tasker will need to source materials.

Bring garden wire and screws/all materials including ladder Attach wire to facade, length approx 3.4m Trail climber through Height from ground approx 4.3m