Find a professional gate installation in Maroubra

Pedestrian Gate bolts have slackend and a new one is needed to hold the gate in place so that it opens and closes without lifting. Note: I'm asking for a new bolt (drilled thru the aluminium and then the brick) in the 2nd brick from the top. Thank you

The hinges on our side gate are old and require replacement. We need someone to remove the gate and hinges, install new hinges, then re-hang and align the gate. Gate itself is in good condition. Easy access. Please include supply of suitable hinges in quote.

Fix swing hardware on side garden gate

Mount a baby gate to a concrete wall

Looking for an experienced installer to help set up a sliding gate at the front of my driveway in Maroubra. Currently no gate installed. Opening is approx. 3 m. Driveway has concrete slab with brick post on each side. To slide onto the hedge side. Scope of work: * Install posts (or use existing if suitable) * Install and align sliding gate track * Mount sliding gate (gate can be purchase based on your advice) * Ensure gate runs smoothly and is level * Install automatic gate opener (solar or battery kit) (please quote separately) * Advice on best budget setup Notes: * Access is straightforward * Prefer someone with previous sliding gate experience * Please include photos of similar jobs if possible Budget: Open to quotes (looking for a cost-effective solution) Location: Maroubra NSW When: Looking to be installed around 1 May. Note: Happy to assist on the day to reduce labour time/cost.

Screw large Perspex sheet carefully (without cracking Perspex) onto back of metal posts on pool gate

Install baby gate (drill needed). Retractable baby gate to be installed on an angle between two brick walls

The automatic sliding gate motor does not work, it's a FAAC brand , not sure what's wrong with it

Build fence and gates at the front of the house, for both me and my neighbour, in duplex property. 120 cm height. Driveway gate (sliding), please quote for both motorised and manual. See before and after photos. Measurements: A: 1.45 m B: 4.00 m C: 3.70 m D: 7.30 m

I’m looking for a skilled welder/fabricator to modify my existing front gate. The gate currently sits too low (set to clear the driveway) and needs to be raised and adjusted so it swings inward instead of outward. Scope of works: • Grind off existing welds/hinges as required • Raise and reposition the gate/hinges • Weld gate back into position securely • Ensure smooth inward swing and proper alignment Gate is already installed — this is a modification, not a new gate build. Please bring your own tools and welding equipment. Experience with gates/fencing preferred.

Need a gate installed in the side passageway similar to the one shown in the picture At the other end.

Hello, I'm looking for quotes to supply and install a pedestrian gate and small fence between our concrete wall posts. Preferably looking for aluminium/colourbond slat gate and fence in colourbond woodland grey colour. Please see below for measurements but I would be keen for the measurements to be done by yourself in case these are not quite accurate. Please quote price. Gate space is 99cm width 133cm Height Fence is 74cm height 175cm width

Have a side gate that the kids can open. Need either a key cut or lock added to it.

Auto slide gate is not working, please provide a quote

This project involves the replacement of your existing garage door and the replacement or installation of a new two-gate system (driveway and pedestrian gate) at your Maroubra

Install a lock so that the metal gate is lockable

We need to have a weather cover fitted above an outside solar battery; and a replacement drop gate for a holden ute. Wood is preferred for both.

The gate to the backyard, glass is detached from the frame.

Broken gate latch as shown. Needs replacement with alternative and sturdier mechanism. Seeking recommendations and installation.

I’m looking for a skilled individual to install a wooden gate measuring 1.5 meters, I already have the gate; I just need someone experienced to handle the installation. I’m willing to cover any necessary products or materials needed for the job. If you’re interested and available, please reach out with your rates and availability. Thank you!