Find a professional gyprocker contractor in NSW

Spit system was removed so new to patch the holes from that and there’s has been a squeeze cut our lower that need to be patched to. Need to get coloured paint. I have the paint code.

Looking for someone to do one gyprock wall and have door for the toilet 1.90 wide and 2.35 height

The bathroom exhaust fan has detached and fallen from the ceiling, resulting in damage to the gyprock. Repairs to the ceiling are required, along with the proper reinstallation of the exhaust fan.

Repair water damaged sealing, as per picture. So new skylight can be placed to old leaking one. Unsure what can be done to repair, so can discuss once reviewed.

Urgent - need done today! Hole is approx size of A3 paper (maybe a bit smaller) Need gyprock replaced in tha lt section / plastered and painted (just that section - not whole wall). You will need to go to bunnings and get a Sample pot of paint to match ) - bunning Balgowlah is 5 mins away

Hi, need a licensed tradesperson (plasterer or passive fire specialist) for a small but compliance-critical ceiling repair in my top-floor (3rd storey) strata unit in Bondi Junction, NSW. Job details: • Patch and fireproof a single 150 mm hole in a double-layer Gyprock fire-rated ceiling. It’s to cover a hole made for range hood ductwork that is going to be removed. • Access via manhole to roof cavity from inside unit (no external roof access needed). • Must restore full fire-resistance level (FRL) per Australian Standards (AS 1530.4/NCC) using tested passive fire system + matching plasterboard reinstatement on underside. • Include photos, product data sheets, and compliance statement for strata AFSS. • No cosmetic finish required (just functional patch); I’ll paint later. Requirements: • Experience with strata fire-rated repairs (double Gyprock ceilings). • Provide tested system detail for this penetration size. • Public liability insurance + relevant certifications. Budget: (open to quotes based on method). Please reply with your experience, proposed approach, and fixed price quote.

Plasterboard wall repair after TV mount removal – professional finish required. I have a wall with multiple old TV mount holes, metal anchors, and a cable chase opening. I need: • All metal anchors removed • Damaged plasterboard cut back cleanly • New plasterboard patches installed with backing • Joints taped, skim coated, sanded flat • Entire wall repainted to match existing finish This is not a filler-only job — it must be done properly so the wall is perfectly flat and invisible after painting. I also want all cables hidden behind the wall Please quote including materials and paint.

Two walls in both lounge and dining room have circa 1970s style wood paneling glued over exiting plaster. Need panels removed, glue removed most likely with heat gun. Walls to be paintable. Rubbish removed.

Have an approx 1.5M by 1.5M hole in the by-rock for balcony ceiling that requires to be re-gyprocked to fix. Low ceiling easy to reach.

We have a house which is about to go up for sale. The garage had a damaged dual electrical socket which has since been re-placed to another position but the old socket now needs filling and smoothing off. Completely flexible of time/date just let me know what suits you best.

Needing a patch repair done to a higher standard than the current attempt! No re-painting required. Budget is flexible!

Needing a hole in a gyprock wall repaired, pretty much exactly the same size as a basketball, refer to photo, cheers

Need to fix 5 wooden framed paintings in Gyprock wall in proper place. Each painting is approximately 38 cm height and 34 cm width. Each approximately 2 kilograms weight.

I have 2 walls and wardrobes that need to be set only walls are 3m long and 2.4 high . Wall is exactly same in other side in photo . Possibly sand next day also

Trying to finish the small elements of the house before we break for Xmas. Had new windows replaced and as a result some of the wall needs to be re-Gyprocked then it will need to be patched and then painted. some rooms have only small amount of patching required so I can probably use filler. In the other rooms, need more extensive Gyprock. keen to get this completed this weekend if we can and opportunity toquote on bigger painting job which includes the front of our house and the sides of our house

Replace a piece of gyprock damaged by water leak approximately 0.41m X 1.8m. 2 patches. 4 x skimming of holes from picture hooks, including holes beneath picture hooks in images. First image with largest hole is area to be replaced.

Patch Gyprocker rectangle 1m x .6m Please look at photos The cutout is there. You will be required to put support behind to secure cutout. You will need to plaster. I can sand given the time to dry.

My electrician has to move the rangehood to the front of the box. I need help with patching the hole it will leave.

Need a labourer to help with putting up gyprock. Just someone that can pass tools, boards etc to a builder - 2 days

Gyprocker - patch small section of gyprock cut out from the ceiling Approximately 45cm x 30cm will also need the area repainted