Find a drywall repair professional in NSW

Open a stapled closed plywood box and unpack 2 panels of artwork (mounted canvas in wood frame). Hang them both level on drywall and remove packaging

commercial reno needs ceiling tiles put back including qty40 to be replaced with new (tiles on site) include replace approx 5 cross tees (on site) also patch drywall approx 100x300mm (drywall and plaster on site).. approx 6hrs 1 guy

Job: Repair toilet roll holder Toilet roll holder is pulling out of the gyprock wall, and the surrounding plaster is damaged. Existing screws won't hold securely. Looking for a handyman to repair the wall as needed and securely reinstall the holder. Please include labour and materials in your offer.

I need a hole in the drywall to be repaired/patched up, approx 30cm x 30cm - see picture provided No tools, paint or other materials will be provided. Need to be completed as soon as possible - Due date: by Monday, 19 October 2026

my brother fell on drywall

Repair a small broken dry wall

Need drywall fixed around the house. Some very minor, some little bit patch required, and then paint.

I need someone strong to help me lift four sheets of 3.00m x 1200mm, 10mm-thick Gyprock; I just need someone to hold them in place. It’ll be done in half an hour. Just help me hold it steady, and I’ll secure it.

To fill in a hole I accidentally did, it is the size of an average basketball

Preparing home for sale. 1 X dry wall repair and refresh coat of white paint throughout house.

Looking for my 65” TV to be mounted on the wall (drywall).

Repair drywall damage from drywall bracket nails and install curtain track bracket

Looking for someone experienced with wall mounting to complete two small jobs: 1. Secure/hinge a large leaning floor mirror to the wall The mirror is currently leaning against the wall and needs to be safely secured at the top so it cannot fall or tip over. I’d like it to keep its slightly leaning position rather than be mounted completely flat against the wall. The wall appears to be drywall/plasterboard with metal studs. I previously attempted to install the mirror fixing and encountered metal behind the plasterboard, so I’d prefer someone experienced with this type of wall who can determine the correct mounting point and fixings. 2. Wall mount a Dyson cordless vacuum I’d also like the Dyson wall dock/bracket securely mounted so the vacuum can be stored hanging vertically. I have the Dyson mounting bracket/dock. Please bring a drill, stud/wall scanner and any appropriate screws, anchors or fixings required for both jobs.

::This job has two components:: Caulking and Drywall repair. If you can only quote on one of the two this is ok - simply make your intention clear in your quote by verifying which job you can complete. Ideally, I would like a handyman who can conduct both at the same time but this is not a prerequisite. Refer to the scope plan to delineate each scope. Reference photos attached and I can send more photos on request. JOB 1 (Caulking - shown blue lines on the plan) Re-caulk areas of an apartment which has been subjected to settling of the building. Refer to the below details and include the removal of old caulking where applicable. Note that the measurements are for the entire run of each of the affected areas - it assumes patch repairs are not possible for the purpose of a conservative quote. If you can patch repair to reduce your quote that is even better. Shower (ignore the bathtubs) full floor inside the shower @ 1460x900mm Bathroom (dry area) 1 of 1460mm @ floor 1 of 2400mm @ wall Skirting (generally) JOB 2 (Drywall + skirting repair) Repair damaged PB wall, skirting and ceiling. Scope to include up to complete prep work, ready for painting .e.g. spakfilla, sanding etc. Do not include painting in your scope. Area 1: 1 x Main wall junction Drywall and skirting has moved enough for the PB to crack and dislodge. Skirting has a 6mm dislocation Area 2: Secondary Wall junctions (total 3 of) Standard hairline cracks, unlike Area 1. No more than 50mm long. Less than 1mm gap. Skirting has less than 2mm dislocation. Area 3: Ceiling Hairline cracking along the run shown in photos. Thanks

Mount folding table to drywall I need someone to securely attach a folding table/unit to a drywall wall. The table is already assembled and has a base that sits on the floor, so the wall screws will not be carrying the weight of the table. They are mainly there to secure the top of the unit to the wall and prevent it from tipping forward. There are 4 pre-drilled screw holes along the top rear section of the table. The main complication is the skirting board at the bottom of the wall. Because of the skirting, the back of the table cannot sit flush against the drywall. I have therefore bought two boards/spacers the same thickness as the skirting board to sit behind the table and fill the gap. The job would involve: - Positioning the two spacer boards behind the table - Drilling through the existing 4 mounting holes, through the spacer board and into the drywall - Using suitable drywall anchors/fixings to securely hold the unit against the wall - Making sure everything is straight, secure and neatly installed Please see the attached photos, which should make the setup much clearer. Please bring the appropriate screws, drywall anchors/fixings and tools required for the job.

Need to hang a canvas in my living room. The painting isn’t heavy but it will be mounted on drywall.

Finish final touches in sanding the top floor of a home. Walls have been sanded but it need a bit of perfection .

We have 2 blinds that are broken. One of them is very stiff. It's very difficult to pull the blind up. The other one appears to have come off its tracks. We also have a few small holes in the drywall that need patching up.

We have a new 65 inch TV. Have also purchased a full motion TV wall mount MD2617-24K-04 which is compatible. After someone to install the wall mount and mount the TV onto drywall

I have two drywall patches that need patchwork and paint afterwords. Both patches are 3-4cm in radius.