Find a professional computer repair service in NSW

Started on building a pc. But couldn’t get it done. Need someone to finish it.

The screen is completely shattered need a new one

Computer starts fine, both screens say no signal. I've checked cables running from PC to monitors, unplugged and replugged

Epson ET-2810 color printing is not coming. only B&W is working. Need a repair

We have 3 TV screens on the front of our canteen and need the HDMI cables to run up into the roof, through the ceiling (there is ceiling access) and down inside our shop to our computer. We currently have 5m long HDMI, but may need longer, so we are happy to source or you can source them for us. We do not believe this would be a long job, so we want to see flexibility in the budget we set.

Battery/Charger seems broken - not charging - I bought a new spare battery needing it to be installed.

I need help in getting my pixma Canon fixed .

Hi! I'm looking for someone experienced with PC builds to rebuild my gaming PC at my place. All parts are supplied. NEW PARTS - AMD Ryzen 5 5600 CPU - Gigabyte B550M DS3H AC WiFi motherboard - DeepCool AK400 G2 CPU cooler - Thermaltake S100 micro-ATX case - Corsair RM750e power supply (fully modular) - Silicon Power UD90 1TB NVMe SSD - 2x Arctic P12 Pro PST 120mm fans REUSED FROM MY CURRENT PC - RTX 3060 graphics card - 2x8GB Corsair DDR4 RAM - Existing SSD (Windows) and HDD WHAT I NEED DONE 1. Take apart my current PC and install everything in the new case 2. Use ONLY the Corsair power supply's own cables (not the old EVGA cables, they aren't compatible) 3. Mount the 2 Arctic fans at the front as intake (chained together), keep the rear fan as exhaust 4. Clean the dust off the reused parts 5. Update the BIOS if needed and enable XMP so the RAM runs at 3200MHz 6. Install AMD chipset drivers 7. Boot into my existing Windows and check everything works 8. Run a game for 10-15 mins together to check stability and temperatures I'D LIKE TO WATCH AND LEARN I'd like to watch and ask questions as you work, so I understand how it all fits together and can maintain or upgrade it myself later. Please be comfortable explaining each step. Happy for it to take a bit longer. Please mention your PC building experience in your offer. Thanks!

Task Description I’m looking for someone experienced in PC setups and cable management to help organise and tidy my gaming/workstation setup. I want a clean, professional, minimalist appearance with as few visible cables as possible. Work Required: * Organise and conceal cables behind and underneath my desk. * Manage cables for my gaming PC, dual monitors, peripherals and other accessories. * Secure cables neatly using cable trays, sleeves, clips, Velcro ties or other suitable solutions. * Organise power boards and power adapters to minimise clutter. * Ensure cables are routed safely without affecting airflow or accessibility. * Leave sufficient cable slack for monitor adjustments and future maintenance. * Make the overall setup look clean, organised and aesthetically pleasing. My Expectations: I’m looking for someone who takes pride in their work and has experience creating clean gaming or office desk setups. Ideally, you should have examples of previous cable management work.

I have a new HP Smart Tank All-in-one printer and a new HP computer and a new Starlink. I need them all to talk.

Ethernet cable connection which goes exterior of house has stopped working need assistance to fix and text this is for quote only

Install 4 computer monitors onto monitor arms

Hello. I need someone who is experienced and confident that can set up a brand new Samsung Monitor Viewfinity S9 27 and a new Mac Mini for me. - Monitor Setup - Mac mini setup - Connect everything to work including keyboard, mouse and keyboard and Wifi. Both Mac Mini and Samsung monitor come with all cables. Experience is a must.

I have a back granny flat and I have internet cable that runs out the back under the house, it’s not long enough to reach the router so there for no internet. I need the cable long enough and hopefully some how hidden if possible

We require a certified cabler to attend our site to fix a damaged CAT6 cabling between two buidings. The run is approximately 30m long and within a building. The cabling is used to connect two network switches which we have loss communication on. We need the cabler to perform the following: - find the location of the damaged cable - repair it - run a cable tester on it to confirm pairs are all good - run a speedtest to confirm we are getting 1Gbps speeds on it - take photo of the work completed We believe the issue is most likely the RJ45 connector to the patch panel which may need to be reterminated as someone was recently playing around with it. We believe the work should be no longer than 2 hours as access to cavity ducts is available, there is good visiblity and the cable run is easy accessible. Location: Darlinghurst NSW 2010 (Address will be provided) You will need the following tools: - Cable Tester/Tracer - Krimp tool - RJ45 connectors - ability to tag and label (labeller) Parking is available onsite. Availability with our team member is Monday to Friday 9am - 6pm. No induction is required however signin with ID is required. Additionally, we are looking for a long term partnership as the site is large and has ongoing projects/works as well as other sites we require assistance with. Nice to have if you have are the following: - NBN Certifications or experience (termination of boxes) - Fibre Certification or experience (For our Data Centers) - Electrical Experience / Certifications - some Handyman Skills (Ability to mount access points/cameras) Why Us high skilled team with experts on the technology stack which has been growing. top tier rated with responsive team.

I need a 1000 power supply installed, and a 5080 gpu. Its supposed to fit i will pay you $50 for wasting your time if it doesnt. Please bring your own tools.

I have a 49 inch monitor and I want 2 laptops and 1 Mac Mini connected with a webcam and bose speakers I have a KVM switch. Just want this all connected and cabling labelled and tidied.All this on a stand up desk

Replace 3 broken keys on HP laptop (they partly snapped on the key bracket when removing keys to clean).

My e skateboard won’t charge anymore. Or some of the wires isn’t connected it just won’t run anymore. I’m sure it’s an easy fix for someone with DIY build e skateboard knowledge or electrician. Price negotiable up to $250

I have a FormD T1 PC that I have built myself. When I run it under the load the PC occasionally seems like it maxes out the fans and is quite loud even through my headphones. I note the cables inside seem to restrict the airflow. Looking for someone to optimise the cable management and install and tweak some software to manage the fan speeds. Full part list (open to swapping out some parts if it will improve sound). CPU: AMD Ryzen 7 7800X3D GPU: Asus ProArt GeForce RTX 4080 OC 16G Motherboard: ASUS ROG Strix B650E-I Gaming WiFi Memory: TeamGroup T-Create Expert Overclocking 32GB DDR5-6000 CL30 Power Supply: Corsair SF750 CPU Cooler: NZXT Kraken X53 Case: Form D T1 Case Fan: Noctua NF-A12x15 120mm PWM Chromax Black Case Fan: Phanteks T30 120mm PWM Triple-Mode Boot Drive: Samsung 990 Pro SSD 4TB