Find experienced local carpenters in Sydney South

Need help buidling a custom shelving unit at a small bar in darlinghurst

I’m looking for a cabinet maker to build the attached image underneath my stairs. The highest point under the stairs is 5ft 7; the length is about 6 foot. Please note the render does not show the pole, but the pole cannot be moved. The dimensions of the render are a little off, but you get the gist of the design I’m looking for. Looking for this to be done ASAP. Thank you!

Build and install cover for electrical board

One of the screws holding the seat cushion on my wooden ergonomic kneeling chair has stripped out of the wood, causing the cushion to wobble. Looking for a handyman or carpenter to properly reinforce and fix it (e.g. dowel/glue or insert, not just a bigger screw). Chair is otherwise in good condition. Tools and materials to be supplied by tasker. I can drop-off / pick up to workshop location in Sydney.

We are looking to build a custom waiter service station trolley for our venue Bouillon L’Entrecôte in Quay Quarter Lane (Circular Quay). I’ve attached a 1-page PDF brief and reference photos for clarity. Key requirements: Timber: Victorian Ash, warm brown stain Finish: Satin lacquer (non-gloss) Hardware: Unlacquered brass rails + side handle Layout: 3 shelves + 1 drawer + removable linen bases Casters: Heavy-duty lockable casters suitable for outdoor paving Approx. size: L 950–1100 mm x D 450–550 mm x H 900–1000 mm (Final sizing can be confirmed once we lock the build) We need the unit to be durable, stable in service, and finished cleanly. Could you please confirm: Whether you can take on this build Rough price estimate (ballpark is fine initially) Lead time from deposit If a site visit is required before final drawings

Experienced Carpenter / Joiner Needed – Custom Waiter Service Station Trolley (Hospitality Venue) We need an experienced carpenter / joiner to build a custom waiter service station trolley for our French brasserie Bouillon L’Entrecôte located in Quay Quarter Lane, Circular Quay. This is not a basic shelf job. The piece must be stable, durable for daily hospitality service, and finished cleanly. Materials & Finish Required: Timber: Victorian Ash, warm brown stain Finish: Satin lacquer (no gloss) Hardware: Unlacquered brass rails + side handle (will age naturally) Heavy-duty lockable casters suitable for outdoor stone paving Functional Layout Requirements (Important) Side: Install a brass or timber bar/rod to hold paper tablecloth rolls (easy pull + tear) Top Shelf (Front-facing): Storage sectioned for cutlery: forks, steak knives, regular knives, spoons Additional space for several water bottles 1st Shelf: Space for sharing bowls, sharing plates, and water glasses Remaining Shelves: Storage for napkins Storage for tablecloth tissues Dimensions (Approx., can be refined with you) Length: 950–1100 mm Depth: 450–550 mm Height: 900–1000 mm What We Need From You Ability to build off reference photos + spec brief Confidence in detail finishing Transport + delivery to Circular Quay (Optional) You can fabricate brass parts or work with your preferred metalworker — otherwise we will supply the brass rails.

carpenter , installer, moving, delivery

Carpenter needed for 2 days to assist with installing skirting, architraves and doors. Daily rate of $350 (negotiable, dependent on experience). Job on Monday & Tuesday

3 cabinets are to be uncrated and installed. The sizes are as follows. 140L x 40W x 180H (Only legs are to be installed) 80L x 34W x 95H (2 Door) 120L x 34W x 95H (3 Door)

Task: Build Wooden Frame to Support Metal Sheets for T-Shirt Display Description: I am looking for someone to construct a wooden frame to secure around the sides of an existing concrete frame. The frame will be used to hold metal sheets for a T-shirt display. Details: • Concrete frame size: 3200mm (H) x 2400mm (L) • Metal sheets: 10 sheets, each measuring 1800mm x 600mm • The wooden frame should be strong and secure enough to support all metal sheets for display purposes. Requirements: • Experience with woodworking or frame construction • Ability to work on-site and securely attach frame to concrete • Materials may be supplied or can be discussed Location : Town Hall area, City, Sydney

build a cabinet insert for the kitchen fridge cavity. The insert would support the hinges needed for the doors to cover an integrated fridge.

Build a cabinet that has doors hinges etc it’s 170cm wide has doors etc

I want a large piece of wood ( i can supply or i can pay you extra to supply) cut into approx 15 smaller pieces (think trophy base size around 20cm*10cm) and then the edge profiles routed to decorative edging like the images attached - I can then pick up from you - MUST BE LOCATED GREATER SYDNEY

I want my 1.5m long two cabinets to be applied woodgrain wallcovering to match my benchtop. Only the side panels, door panels and open shelf need to be done. The inside carcassas stay white.

Existing kitchen, fridge space is a bit small Need to adjust it to my fridge! Just want to make it bigger space Bench is MDF Need a joinery to help me out

Remove old architraves and install new - to external windows.

Carpenter needed for new duplex site. Includes installing doors, skirting, architraves & more. $450/day

Wood floor boards totalling approx 16.7 square metres (Kitchen, Dining, Hallway) requiring sanding and re-staining to match adjoining living room. Stain and varnish can be supplied along with basic tools (eg: small electric sander), the tenderer will need to bring any specialised equipment. Note: the floors have already been refinished with the same stain as the living room; however the colour is not consistent. So the objective of the job is to rectify the inconsistency of the finish

I have a small kitchen in a 1br CBD apartment that has dated joinery - it’s laminate and I’d like to paint it white.

Looking for a carpenter. Need to have a trade licence, Ute and the required tools. Rate $55-$65 per hour. For standard carpentry tasks such as: Installing a grab rails Adjusting doors Installing windows Etc