Find experienced local carpenters in Engadine

Need about four shelves to be installed in this space. This photo was taken before painting was completed. Just after basic white shelving from Bunnings, or the like. Space is approx 873mm wide x 140mm deep at the top and slightly narrower on the bottom so will need to be cut onsite.

I started sanding and ran out of time so I need someone to finish it. Timber deck is approx 10m x 3m Photos show what it looks like now, it just needs sanding around the screws and edges. 1/3 of the decks sanding is complete, 2/3 needs sanding around the screws and edges need sanding.

This is the shed. It will be on a concrete slab. Everything is ready to go. https://www.bunnings.com.au/absco-sheds-3-0-x-0-78-x-1-95m-monument-ezislider-double-sliding-door-garden-shed_p0374571?epik=dj0yJnU9bTdkZDhEcjVFX2tubk1OYWU2X3VpcW1uRC11YmFlMFomcD0wJm49U3pVUDgzRGdXT3NqTjI2dWd4enNFZyZ0PUFBQUFBR2RSYndn&productName=absco-sheds-3-00m-x-0-78m-x-1-95m-monument-ezislider-double-sliding-door-garden-shed&pid=0374571

Looking for someone to build our flatpack easy shed. See photo for model. The concrete slab is going in this Saturday or Monday, so would like it built shortly after

We bought a flat pack shed from easy shed and need someone to build it for us. We also would like help forming up and laying concrete for the base - if not possible to include that step just let us know in your quote Image attached to show which shed it is and location

Take out water damaged subfloor chipboard as shown in photos, and replace with new. There are two small rooms but only sections need replacing. Measurements: Room 1: approx 130cmm x 380cm Room 2: approx 95cm x 300cm You will need to supply materials please include this in quote thanks

i need a deck built with ecodeck

I would like a wardrobe / office desk built into a room

Replace 4 pieces of timber on a deck The deck is painted timber ! We have the paint. Each panel of timber is approximately 1-2 metres

INSTALL ONLY OR SUPPLY AND INSTALL Put together a flat pack kitchen and install the cupboards (uppers and lowers), kick board, install sink and rangehood, benchtop. If you have experience doing this, please send quote. If you can supply and install basic kitchen please message me also.

We require a handyman to install half wall vertical join panelling to a bedroom (approx 2.7x3.7m room) with 20mm beading to sit on top of panelling. We will supply the 1050mm high panelling in 900mm wide sheets, liquid nails and silicone filler. Requirements: - will need own tools e.g. nail gun and nails - panelling to sit on top of existing skirting board - top of panelling will need to be level and may require some sanding - will need to cut panelling around 1x power point and 1x window frame If you are interested, please provide a quote and advise approx time to complete job, thanks.

Wooden windows are painted shut. I need them to be restored so they work There are 7 windows painted shut inside and out. Let me know your price and what it includes.

our fridge is slightly too wide for the alloted fridge space, so we wanted to see what the cost would be to reduce the length of the sliding door track on the left, and move the entire pantry and above fridge cabinet slightly to the left to make space for the fridge. noting this would leave a bit of a gap on the right hand side, some kind of solution to disguise that as well. Not sure what the budget should be but open to hearing estimates/negotiating cost.

Entrance door sanded and stain/varnished. Brand new tried to stain myself and didn't like the colour so would like to get redone properly

Just had our floors resanded and stained and the guy that did it, left dark stain products on every skirting board, including the stair-case of our 5 bed house. Hoping someone can help!

Timber floors in need of a sand and finish. Some areas need a repair.

I need custom sturdy shelving for two cupboards. Labour and materials to be inclusive. Details: Cupboard 1: Plasterboard walls 4 white shelves with dimensions: 1270mm x 530mm Cupboard 2: Fibreboard walls 4 white shelves with dimensions: 800mm x 450mm

Erect, assemble, install 2 x fence sheds colorbond flat packed (easy shed) 3m wide 600mm deep 1.8high hinge doors - Due date: Flexible

Construction of a 3.75x3.75m gable aluminum garden shed. We have taken delivery from the supplier "easy shed" to be installed on existing concrete slab. - Due date: Flexible

Hi, I need to install and cut 2 laminate benchtops from IKEA. Width is fine and doesn't require any cut. The first benchtop measure 246cm X2.8cm, our wall is about 245cm so it's about 1cm cut. It'll be sitting on cabinets on 1 side and on a small fridge on the other side of the wall so we will need to install it on bracket on this side of the wall which you can either provide or advise what to get and I'll purchase. The second benchtop measures 186cm. Wall to Wall is approx 215cm . We'll need to cut approx 35 cm to the 63.5cm width from the first benchtop + cut for a rounded sink - Due date: Before Sunday, 7 January 2024