Find experienced local carpenters in Melbourne City CBD

I have a restaurant and need a 9cm hole placed in a stainless steel benchtop. The bench has a stainless steel top layer with a wood layer underneath. Hole needs to go through both

I need someone to measure the corner space of my kitchen cabinet and help me install a suitable Lazy Susan cabinet organiser. The task includes: Measuring the kitchen corner cabinet to determine the correct size. Finding and purchasing a suitable Lazy Susan organiser that fits the space. Installing the organiser and ensuring it works properly. I’m looking for someone who can handle the entire process, from measuring and sourcing the right organiser to installation.

Hello, We are in need of someone to complete our current DIY closet cabinet renovation in our en-suite. Currently, we have almost finished the back side ourselves with the LED lighting. We just have to install the bottom drawers. This was done very DIY style, as you can see in the photo. We need help with the right side, starting from scratch. We will order the MDF for the cabinets but need someone to essentially create the cabinets and put them together according to the attached design. My partner, who is a sparky, would like to do it together as he wants to also learn throughout the process. Here is a reference of the design, although we may have to adjust it to the actual closet dimensions. For example, the right side of the cabinet design goes all the way to the top of the wall. However, our actual closet has a cornice at the top, which does not allow us to go all the way up. We have the design idea but will need help with the dimensions of the cabinets for the right side as well. However, we can discuss the details later. As my partner is a sparky he will guide around the LED lighting set up and do the electrical work. I have also attached a photo of what our closet currently looks like. We do have tools in the garage for most of the work. However, a walkthrough of our closet and the tools is probably required (if you need more or specific tools), and if you have your own additional tools that you think would help, that would help. We are looking for someone experienced in cabinet making and has done several projects with a portfolio as we would like your guidance and expertise. The start date can be decided together. However, ideally, we would like to start in the next two weeks. Thank you!

Title: Extend Existing Stainless Steel Café Bench – Melbourne CBD Hi, I’m looking for an experienced stainless-steel fabricator or welder to modify and extend an existing stainless-steel bench at a commercial café in Melbourne CBD. The existing bench section measures approximately 500 mm, and I need to extend it to approximately 700–800 mm, with the final measurement confirmed on-site. The bench will support a commercial 2-group coffee machine weighing approximately 90 kg. Scope of work: * Supply and install a suitable stainless-steel bench extension. * Reinforce or support the extension where required. * Ensure a strong, stable and level working surface. * Provide a neat, smooth finish suitable for a commercial café. * Complete the necessary fabrication and installation on-site. Photos of the existing bench are available. Looking for someone experienced in commercial stainless-steel fabrication who can complete the work professionally. Location: Melbourne CBD, VIC 3000. Preferred date: Friday, 23 October 2026, or flexible by arrangement. Please submit your offer for completing the work, including labour and materials, through Airtasker. Thank you.

Need about 4 holes filled through this stainless steel bar to allow for cables to run below. Each hole to be about 6cm in diameter.

Looking for experienced cabinet installer to help install kitchen laundry etc.. on this week Thursday and Friday. Must have experience and own tools

Custom Kitchen Cabinetry & Oak Floating Shelves – Melbourne CBD I’m looking for a cabinetmaker/joiner to supply and install an additional section of custom cabinetry and oak floating shelves in my kitchen in Melbourne CBD. 1. Custom Cabinetry I currently have a temporary freestanding bench in place (120cm W × 39.6cm D × 85cm H) that I’d like to replace with built-in cabinetry. Requirements: * Similar dimensions to the existing temporary bench, subject to final measurements. * White shaker-style cabinetry to match the rest of my newly renovated kitchen, including door profiles, finish and hardware. * Existing cabinetry is believed to be Polytec. Exact colour and finish will need to be identified/matched. * Matching stone benchtop – YDL Stone Acqua Mare. * Functional storage underneath, preferably cupboards and/or drawers. * Professionally installed with a seamless finish so it looks like part of the original kitchen. 2. Oak Floating Shelves I’d also like two floating oak shelves installed above the new cabinetry, similar to the inspiration image attached. Requirements: * Natural/light oak finish to complement the existing timber flooring. * Approximately the same width as the cabinetry, with final dimensions to be confirmed. * Concealed brackets/fixings for a clean floating appearance. * Supply and installation included. I’ve attached photos of the current kitchen, temporary bench, proposed design and stone selection. Please provide an indicative quote for supply and installation, including materials, labour and any stone fabrication. Happy to arrange a site inspection for accurate measurements. Ideally looking for someone experienced in custom cabinetry who can assist with identifying and sourcing the matching materials.

I’m looking for someone experienced with carpentry or woodworking to come and cut 4 rectangular holes in an existing wooden platform to fit our Blendtec blender units. The holes need to be measured accurately so the blenders fit securely and neatly into the platform, as shown in the attached photo. The photo shows hole on a steel platform but I wood like it on a wooden platform. Requirements: * Cut 4 rectangular holes in the existing wooden platform. * Measure each opening to ensure the Blendtec blenders fit correctly. * Ensure all edges are smooth and neat, with no rough or splintered timber. * Bring your own tools and equipment. * Ideally, have experience with carpentry, cabinetry or commercial fit-outs.

I have three wall hanging cabinets made from melamine one at 900mm one at 1200 and one at 1800 that need replacement.

I’m looking for a qualified carpenter/subcontractor to assist with a variety of carpentry and maintenance jobs I can feed a little of work to fill in there week/month across the Mornington Peninsula / South-East Melbourne area. The work can vary from smaller maintenance jobs through to general carpentry, repairs, installations and outdoor works. I’m looking for someone reliable who is comfortable working independently and has their own tools. Work may include: * General carpentry and repairs * Door installation and adjustments * Decking and outdoor timber work * Pergolas and other outdoor structures * Weatherboards and cladding * Fencing and gates * General property maintenance * Fixing/repair work * Installation of blinds, towel rails and other fixtures * Working on rental/property-management maintenance jobs * Other general carpentry work as required. *site quotes may be required Please apply with your hourly rate.

Looking for a handyman or carpenter to make a folding timber target board for a 4-day brand activation. I have a full drawing. The job One upright board, face 1000 × 1700 × 18 mm ply Pine 70 × 35 A-frame that folds flat (M8 bolts at the top) Front legs 1850, rear 1600, stay 420, four small feet Five holes cut to a marked schedule (drawing attached) Spray or roll matte black after the holes are cut White ring and a score number under each hole No logo, no vinyl, no delivery to the venue. You buy the timber and hardware. Quote labour and materials as two numbers. Must be ready to collect in Melbourne on Sunday 5 October. Event bump-in is that Wednesday so the date is firm. This is a one-off prop, not furniture. Square, solid, folds, done.

Need a carpenter to build one timber A-frame throw game from a drawing. Photos and PDF attached. What to build Face: 18 mm structural plywood, 1000 mm wide × 1700 mm high Frame: dressed pine 70 × 35 2 × front legs 1850 mm 2 × rear legs 1600 mm 1 × stay 420 mm, fitted 400 mm off the floor 4 × feet 120 mm A-frame, about 15° lean, footprint 450 mm Two M8 bolts at the crown so the unit folds flat for a car Five holes, holesaw then sand. Centres from the top-left of the face: 50 top — Ø120 — X 500 — Y 380 20 left — Ø150 — X 280 — Y 720 20 right — Ø150 — X 720 — Y 720 10 left — Ø200 — X 300 — Y 1180 10 right — Ø180 — X 740 — Y 1180 Matte black after the holes are cut White 8 mm ring at each hole Score numbers 50 / 20 / 10 painted under each hole No logo and no vinyl graphic — that comes later

Hi, Per photo have some missing skirting in a bedroom in the CBB apartment that I would like to try and get fixed ! Also would like to replace bathroom door handle. Thanks, Lucas

Looking to get cabinets for my two walls. The brick wall i want cabinets in full whereas on left i want tv on top and cabinets bottom. Attached are reference images as well

Looking for an experienced IKEA kitchen/cabinet installer to complete a small METOD installation in Melbourne CBD. The cabinet carcasses have already been assembled, including the doors, hinges, drawer and internal shelves. Work required: - Install and level 3 × shallow METOD base cabinets (2 × 80 cm and 1 × 40 cm) - Install METOD suspension rail and mount/secure cabinets to wall - Fit METOD legs and join/align the three cabinets - Install and cut FÖRBÄTTRA plinth/kickboards, including finishing the exposed end - Cut JÄRSTORP laminate worktop to the required length and reduced depth to suit the 37 cm-deep cabinets - Fit and secure worktop, including properly finishing/sealing exposed cut edges - Fit exposed cabinet end/cover panel - Final alignment/adjustment of doors and drawer as required - Neat final finishing/silicone as appropriate All IKEA cabinetry and main components are supplied. Looking for someone with specific kitchen cabinetry/IKEA METOD experience and the appropriate tools to make clean, chip-free cuts to a laminate worktop. Please mention your relevant kitchen/cabinet installation experience in your offer.

Carpenter / Handyman – Ongoing Work | Alexon Projects Alexon Projects is looking for a reliable Carpenter who can also undertake general handyman works for ongoing residential and commercial projects across Melbourne. We currently have approximately 4–6 jobs per week and are looking to build a reliable relationship with a trade who can take on regular work. What we’re looking for: Qualified/skilled carpenter with solid hands-on experience Able to complete general handyman and maintenance works Reliable and punctual Fast and efficient Good attention to detail Able to work independently and get jobs completed promptly Professional communication Own tools and vehicle ABN and appropriate insurances Comfortable working across different sites and job types Typical work: Carpentry repairs and modifications Door adjustments and installations Grab rail and accessibility-related works General repairs and maintenance Minor building works Patch, fix and make-good works Residential and commercial maintenance What we offer: 4–6 jobs per week Ongoing work for the right person Clear job scopes and instructions Regular projects across Melbourne Opportunity to build a long-term working relationship with Alexon Projects We're not looking for someone who needs to be chased to complete jobs. We need someone reliable, responsive and proactive who can attend site, understand the job and get it done properly and promptly.

Replace Restaurant Drawer Runners – URGENT We need an experienced cabinet maker / handyman to replace the existing drawer runners at our restaurant in Melbourne CBD. The drawers are constantly sticking and coming off the tracks, so we want to replace the existing runners with strong, heavy-duty runners suitable for daily commercial restaurant use. Job: * Remove existing runners * Supply & install heavy-duty runners * Reinforce fixing points if needed * Align and test all drawers * We want a long-term, stronger solution, not just a repair Please recommend the best runner option, and provide an alternative option if available. Please include: total cost (labour + materials) and your earliest availability. Photos attached. URGENT – looking to get this done ASAP.

We are looking for someone who can custom made double lipped timber capping (as per the photo) for a double pailing fence. Size should be 200 x 45mm and total length is 26m. Please comment your quote.

I am experienced in carpentry and plastering work, including measuring, cutting and installing timber, framing, repairs and general carpentry. I also have experience with plasterboard installation, patching, stopping, setting and finishing walls and ceilings to achieve a clean, smooth result. I am confident working from plans and measurements, preparing surfaces, completing repairs and ensuring all work is completed safely, accurately and to a high standard.