Find experienced local tradies in Crows Nest NSW

I am after some help sanding off old paint and repainting a small balcony balustrade please.

We require nails to be placed into the walls to enable picture frames to be hung on them (5 frames 60x90cm) Parking on premises provided

We need to Render wall that is approximately 50 m². Quote to include all materials required for the job.

We need to Render wall that is approximately 50 m². Quote to include all materials required for the job.

Three drywall repairs are needed two at the top of the stairs (larger) pictured and one in a bedroom (smaller) pictured. Include patch, sand and paint. If you acn provide before and after photos of previous work that would be great. The larger hole is approx 25-30cm across.

I need a gyprocker to do a little bit of sanding and setting for me in crows nest.

Patching of a wall and removal of a small section of plasterboard in 2 window frames.

I require a handyman to wallmount the IKEA Besta cabinet to our gyprock/ drywalls. cabinet dimensions are 180cmw x 64cmh x 40d Cabinet constructed and all hardware for Besta wall mounting and instructions included

We have had the fireplace removed and so I need a qualified renderer to fill the hole. In addition, there is 2 more areas of less than 1sqm that need touching up too.

Remove the door Remove wooden frame from the doorway Install metal frame and finish doorway

Remove existing decking, Install new decking boards, remove and replace stair treads, add stairs handrail, remove lattice and install wire balustrade. Existing deck is 5m length x 2m wide, with 5 stair treads. Materials will be supplied. Timber and wire will need to be cut to length. Tradie will need to bring own tools. Finished product will look something like the attached image. - Due date: Before Saturday, 24 February 2024

Need gyprock on the ceiling to repair two holes - Due date: Flexible

The power point under the sink seems to have issues. When it’s plugged in the dishwasher has a current through it. I think replacement of the actual point will fix it. - Due date: Flexible

Need to dispose of old doors and replace with new sliding doors for built in wardrobe. 2 doors Approx 2.5m in height. - Due date: Flexible

I need my Samsung 50 inch TV mounted to the Plasterboard wall with the Samsung Slim Fit wall mount. Looking for someone who has experience with fixing this exact Slim Fit Wall Mount for a Plasterboard wall. See pictures - Due date: Flexible

Need to install a new power point in the subfloor. The height of the subfloor is approximately 900mm. There is power to the subfloor already as it is directly wired to the subfloor ventilation fans. I will be replacing an existing fan with a new one that comes with a 240V power plug and therefore I need a power point. - Due date: Before Friday, 27 May 2022

Most likely need a new sheet of drywall installed to the studs of the wall. Most likely needs taping and joint compound. Happy for this to be super rough as I’ll be tiling over this entire section so just needs to be reasonably flush. To clarify- don’t need the thinset adhesive removed/smoothed. Just need drywall installed in the section the holes are.

Under-awning shop sign to be removed cleanly and neatly and disposed of. The sign is not a light-box style and is only approx. 1m x 0.5m. It is attached to the awning by 2 metal fixtures which may be unbolted or cut as required. - Due date: Before Friday, 4th Feb 2022

Patch lower half of wall/new Gyprock to replace gutted kitchenette

Installation of 2 power points on brick wall for TV's. Cable, power points, mounting box and ducting all on site. Approx 1m of ceiling space