Find experienced local carpenters in East Melbourne

Assembly of Easyshed - 3 x 1.9 x 2.1 Skillion roof Garden shed. Concrete slab already there. We have also bought the concrete fixings.

Assemble bike shed, and then fix to concrete. Shed brand is Easyshed

Replace plant bed timber flanks with 25 mm thick treated pine Timbers, around 28 m long, we can pay for the timber and pegs.

Hi, I want to get a garden shed installed. its a YardSaver G56 Garden Shed Gable Roof 1.76m x 2.1m Sgl Door with a steel frame floor kit, and some Formboard to be cut down to suit. See image attached. The shed is flat packed at the moment. update: three images added, 1 : the waterproof formboard which I have to make the floor. to be mounted on the steel frame included in the kit from the manufacturer. 2: the site where the shed will be located on gravel down the side of the house. 3: some extra pavers which can be used for levelling it out, I also have some adjustable plastic feet to use.

Needs to fix a sagging wooden gate

I need someway to remove the stains on this stone fireplace.

Sand back to bare wood and apply 3 coats of varnish/Stain (supplied). You can take this away and do it in your own time or at your workshop. I would do it but I’m too busy at the moment.

Require Euro Valencia Fireplace Installation Require both a builder and plumber as it is not an easy installation. Pictures attached. Pic 1 - outside house Pic 2 - inside house & fireplace that has not been installed or built I have installation manual to be sent through if interested.

I need someone with a table saw and experience with woodworking to help me cut some wood I’ve already purchased. If possible, help fitting threaded insert into the wood is preferable too. The initial quote request is arbritrary as I will need to talk it through with the person to figure out how it can best be done/what needs to be done.

Hi, I have just completed constructing a tall 4.5 x 3.75 easy shed (workshop) on a concrete slab. I am up to completing the doors but I have ran out of time. Are you by chance able to finish the door assembly for me?

Need an experienced carpenter to fill up existing weather boards wall down to the ground as in the photo without any gap left, the length is 4 meters, highest side is approximate 470mm. Also need a new metal frame wooden lockable fence gate about 900 L x1500 H mm to replace current broken one, locker much be accessible from both sides. please quote for them separately. Price includes all materials, labour and disposal please, thanks.

Experienced Door Carpenter - ABN required 3 French doors to be “shaved” so they open easily as they are currently “sticking”. 2 x 2.5m & 1 x 2m A secondary job to align a cavity door so it locks as it once did. $ estimate is obviously not correct. - Due date: Flexible

I have made a cantilevered bench which is approx 8m long and 300m deep. We bought the terrazzo (30mm thick) and it is being precision cut to size, including mitres. Basically it needs to be precisely stuck down. The front face of the bench is 160mm deep (pre-cut, too) - which is mitred and is to be joined to the flat. There is also a base plate under the seat which is 200m (terrazzo) and this is to be stuck under the seat the whole length.

Looking for someone to measure and build cabinetry/benchtops in a laundry.

Fully sand back and re-stain (in a lighter colour) a 1.2m x 2.4m solid dining table. Can provide space in our garage for you to do the work there over a few days or as required.

We would like our garage door fixed and sealed. It has water damage.

Need carcass framed out under custom concrete bench and doors framed for inbuilt bbq (for our clients). Also attaching timber radials to door frames. All materials will be provided / at site for you.

Few things need doing - 1. The existing wooden window frame needs to be shortened. Nothing too fancy. We are going to put a shower enclosure and it will go over the window - which is fine. But from aesthetics point of view will need about 60cm of the window covered vertically. Architaves need to be placed back on after the work. Adjust the fly screen as well. We are not touching the glass. 2. Take the electrical plate (no wires or connections sit underneath) and place a wooden patch over there. The surface is required to be even basically. 3. Cut the kitchen cabinet in whatever way is cost effective. So that I can accommodate a 1710mm fridge. The current space from the floor to the ceiling is 1700mm.. just those 10mm. Don't mind loosing the last rack of storage.

We had our weatherboard house re-stumped and to do so they removed the base boards off the perimeter of the house. I would like a qualified carpenter to come and replace them for us. Price is negotiable, I am happy to pay for the wood separately. - Due date: Before Sunday, 11 February 2024

There’s two sections as you can see in the photos, each section needs 3 double drawers for each section so 6 drawers in each section amd in total 12 drawers are needed. The length of the sections are: 226cm and 228cm. And the depth is 45cm from wall or 43 from the front of the skirting. These will be custome built drawers. The drawers will be installed on the ground. - Due date: Before Thursday, 22 February 2024