Find an experienced handyman in Maroubra Junction

We have 10.7m wide and 3m long area that needs to be covered by gyprock for our shop. The electricans will get it wired for electrical socket but you will need to cut gyprock so that you can locate the socket out of gyprock and wire it. Total area is 30m2

I need someone who knows how to install the new wardrobe doors from ikea called Skytta doors. You will need to install one panel on the side and top Doors are 2x100cm and 1x 75cm

Shade Sail/Awning installation, wall mount hose installation.

Fix a crack in plasterboard wall

I’m seeking someone to install three sets of curtains from 5 minute blinds. Installation instructions - https://youtu.be/T39pdQmX4ps?si=5QUXEs9fpACg5pqP They are all full length curtains. One is 3300mm wide and the others are around 3000 and 2500. Hoping to get this done tomorrow. 😊

Hi I want to replace the door seal I found the part online see below and will purchase it. I also attach pic of model number and the cracked current seal. Make offers for the labour and let me know if you have the expertise to do it. Let me know your price and can pay you when you are here https://ebay.us/m/qJnYjC

I need an experienced person to install 2 ceiling fans with lights into my father’s small villa. There have not been any installed previously. His home is an older red brick Villa with no roof access.

Hi, I need someone to install a single wall shelf in my lock-up garage in North Randwick. 📐 THE JOB Install 5 L-brackets onto a brick wall and lay 3 timber boards across them to form a continuous shelf. Straightforward installation — all materials will be ready for you on the day. 🧱 WALL TYPE Brick wall — you'll need a hammer drill and masonry anchors/dynabolts. Please only apply if you have your own hammer drill. 📦 MATERIALS I'LL PROVIDE (already purchased from Bunnings) • 2x timber boards — 1100 x 450mm • 1x timber board — 900 x 450mm • 5x heavy-duty L-brackets — 450mm • Masonry screws/dynabolts 📏 SHELF DETAILS • Wall width: 3140mm (boards total exactly 3100mm) • Shelf height: 700mm down from ceiling (approx 2013mm from floor) • Shelf depth: 450mm • 3 boards with 2 join points 📍 BRACKET POSITIONS (important) • B1 — left end (~100mm in) • B2 — at first join point (~1100mm) • B3 — middle of centre board (~1650mm) • B4 — at second join point (~2200mm) • B5 — right end (~100mm in) A bracket must sit at each join point so both boards are supported. ✅ WHAT I'M LOOKING FOR • Experience with masonry/brick fixings • Own hammer drill • Neat and tidy work — level shelf, clean finish Should be around 1–1.5 hours for the right person. Happy to answer any questions before you apply.

the ceiling has come away from the roof. Attached to the ceiling are four motorised blinds. I need someone to unplug the motorised blinds, remove them from their brackets, reattached the ceiling panel to the roof of the apartment, rehang the blinds and reconnect the motors for those blinds. from the photos you can see I have braced the ceiling panle to prevent any furture sagging.

Demolish an old concrete awning above the main entrance of a redbrick block of 6 units. Repair any damaged bricks or mortar. Replace with a "Bahama" aluminium awning and aluminium slatted side privacy screen. (AI generated images attached). Both these items would need to be supplied. Job is through a strata manager so would need to be a certified builder and be able to provide the following: (a) Stage 1 (demolish) and Stage 2 (replacement) quotation for the awning and privacy screen, so we have the full cost of both stages. (b) A quote for the structural engineering/design compliance declarations required under the Design and Building Practitioners Act 2020 for both the demolition and the new construction. (c) Confirm whether the replacement work qualifies as exempt development or whether a Complying Development Certificate is required.

Hi, there's a crack on the glass panel off the door, I'm not sure if the glass that be replaced for the whole door.

Need a tasker for tomorrow around midday please to: 1. Assemble a kids desk 2. Hang a hat hook (vertical with a few hooks on it) to a wall 3. Adjust 2 Tripp trappe high chairs 4. Fix garden gate that has come off hinges (wooden and approx 1.8m in height) Tasker needs to have all own tools and fixtures for hanging hook, fixing gate. Thanks

Had 2 wooden panels on side of garage removed when installing a new garage door. Exposed brickwork under that needs to be rendered. Rest of house rendered in Rockcote acritex course render in clear concrete colour. Will need to match. Will need you to supply render and include in price.

Handyman Needed – Bathroom Light/Fan Fix + Drill Holes for Paintings (Maroubra) Looking for a reliable handyman to help with a few small jobs in my apartment in **Maroubra**. **Tasks:** 1. **Secure and patch bathroom light/fan unit** – it is currently loose in the ceiling and needs to be properly fixed and the surrounding ceiling gap patched so it sits flush (see photo). 2. **Drill 4 holes in wall** to hang paintings. **Details:** * Bathroom ceiling is plasterboard. * I want the light/fan secured safely and the gap around it tidied up. * You will need your own tools (drill, patch materials etc). * Should be a quick job for someone experienced. **Location:** Maroubra **Timing:** Before 15th of April Please comment with: * Your availability * Relevant experience * Your quote Photo attached for reference.

Gyprock wall metal frame and door, frame, skirting and cornice

I’m looking for someone to help reinstall my X-Pole in my apartment. It’s a pressure-mounted pole (no drilling or tools required), but it has shifted slightly and is now off-centre and tilted. The job involves: • Taking down and reinstalling the pole properly • Making sure it is completely straight and secure • Using a spirit level to ensure correct alignment Should be a simple job for someone experienced with pole installation or confident following instructions carefully. I will provide a manual guide. Requirements: • Experience installing X-Poles or similar equipment preferred • Must bring a spirit level • Attention to detail to ensure it’s perfectly straight and safe Flexible with timing. Let me know if you’ve done something similar before 😊

I am wanting a privacy screen installed (in the area pictured) with blackbutt slats 180cm x 42mm x 19mm (60). I have hardwood posts and concrete ready to go on site. Everything is ready to go. Just need someone with the right tools to come and actually install the posts and screen!

I have: -2 paintings to hang (I can supply the Velcro tabs if you don’t have them - just let me know) -2 circular mirrors to hang (preferred that you have screws to hang them) -1 cupboard door to fix (the hinges have come undone at the screws. Need parts to fix it please). -1 soundbar (needs to be mounted on the wall on top of the TV. I have the wall bracket kit that came with a lot of screws and stuff that can help you). Starting bid at $170.

Remove old wall mount, install new one. New one may line up with old one or might not, so may require to drill through tile.

A few dripping taps, a leaking shower, and fixing the sliding door, as well as attaching the bedroom door.