Find trusted local electricians in Alexandria

Looking for a licensed electrician with smart home/home automation experience to install a 2-way Oz Matter smart switch setup in an apartment. Job Details: - Main Wall Plate: Install 1x Oz Smart Things Matter 5-Gang Smart Switch (requires Neutral wire). - Secondary Wall Plates: Replace existing mechanical single-gang switches in the corridor and entryway with 2x Oz Smart Things Matter 1-Gang Smart Switches. - Hardwired 2-Way Wiring: Wire the traveler lines into the dedicated 2-Way terminals on the back of the Oz Matter switch plates and set the rear DIP switches for native 2-way switching. - Note: Ceiling light fixtures are already installed. No dimmers or in-wall relay modules are required—just standard On/Off 2-way load switching. - Official wiring diagram provided by manufacturer: https://drive.google.com/file/d/1kOrdiYUQgQOvCpLZVJx_m7eLr7nNumcm/view Requirements: Fully licensed electrician in NSW. Must issue a Certificate of Compliance for Electrical Work (CCEW) upon completion. Experience with smart touch switches or home automation wiring is preferred.

***I haven’t bought the offset hook yet - will need help with which one to buy*** Looking for a licensed electrician to install a pendant light over my dining table. The job is to: * Remove one existing downlight and use it as the power source. * Install the pendant approximately 60–90 cm away from the existing downlight using a ceiling hook (offset/swag style). * Install the fitting over the existing downlight location * Hang and test the pendant. No new switch is required, and I’m not looking to relocate wiring through the ceiling—just use the existing downlight circuit with an offset cable to position the pendant over the table. The apartment has plasterboard ceilings and good access to the area. I haven’t purchased the pendant yet, so happy to discuss any compatibility requirements. Please quote including labour only (or let me know if any additional materials such as hooks or cable supports are needed). Thanks!

Looking for a licensed electrician to remove 6 existing MR16 halogen downlights and transformers and replace them with modern integrated LED downlights. I already have 4 of the LED downlights but I think I need a transformer - refer to images of existing halogen and current stock of 4 downlights. In your offer advise on price reduction amount if you can use the existing ones I have. Please supply and install 6 x good-quality warm white (3000K) LED downlights, ideally tri-colour selectable and IC-4 rated. Existing ceiling cut-outs to be reused where possible. Price to include LED fittings, removal/bypass of existing transformers, any required plug bases/connectors, installation, testing and disposal of old fittings. Please confirm electrical licence and brand/model of LED being supplied. Budget: $350 all inclusive. Apologies all I wrote 5 instead of 6 for the supply and install - please make necessary adjustment for those who quoted for 5.

Light fitting needs to be removed and electricity capped off (I believe this requires a licenced electician) then a bathroom cabinet needs to be fixed onto tiled bathroom wall

I need an qualified electrcian to fix this exact downlight (see photo attached) as it is not working. The MR16 light globe is working, just the connector to MR16 light globe might be faulty.

We need this power point re attached the wall and a fluorescent light

I’m looking for a licensed electrician to install a 1.8m Cedar LED colour-shifting linear pendant light in my apartment. Job details * Install and securely mount the 1.8m linear LED pendant shown in the photos * Connect to the existing ceiling electrical point * Adjust and level the pendant so it is securely suspended * Complete all electrical connections and testing * Pendant and installation hardware supplied Location: Alexandria, NSW Budget: $100 Licensed electricians only, please. Ideally looking for someone experienced with installing linear pendant lights and available soon.

Hi! Before I move out I need a licenced electrician to swap out some of the blown downlights in my apartment as well as swap back the original pendant light. I believe there is one socket that isn't actually connected to any wiring, so would just need a note saying that's the case. There are quite a few downlights in need of a look: about 7 lights that should somewhat easily click in an out (I attached some photos of the lights). You will need a ladder as some of the ceilings are quite high. Centrally located, parking garage available, I'm flexible on timing and it should be a fairly easy in-and-out. If you can provide the downlights that would be perfect, but I have a few extra ones in the unit just in case.

Looking for a handyman to complete two items as below: 1. Ceiling Painting: Touch-up painting around the ceiling and cornices using anti-mould/zinc-laced paint (to treat and prevent mould recurrence). 2. Light Fitting Installation: Securely install one light fitting into a concrete slab ceiling (light will be supplied, install only)

Looking for a licensed electrician for two small jobs in one visit: 1-Power outlet near a light switch— need a single standard GPO added next to an existing light switch, spurred off the nearby circuit. It’ll sit behind a wall-mounted tablet — I’m cutting a recess into the wall myself to house the outlet and charger, so a standard (non-recessed) GPO is fine. Cable run is a short distance. See photo with tablet placeholder on the wall Note: Before I cut the recess, I’d like you to confirm the exact outlet position and check/mark up where the existing wiring runs behind that section of wall, so I don’t cut into anything live. Happy to hold off on cutting until you’ve had a look on-site. 2- Dimmer switch install (bedroom) — install a Clipsal dimmer I’ve already purchased and will have on-site (see photo).

Looking for an Electrician to install some lighting in Alexandria. Potentially a track (AI image included) or open to ideas. Wanting sorted this week if possible. Ceiling access easily accessible. Unsure on budget for something like this.

The air conditioning line on the roof has about an inch unprotected from the elements. The roof is quite steep (pls see pic) - I just need it taped up or something put on so water doesn’t get in. I also need my mains power re-hooked to the roof. The electrician who did the air conditioning line left it unhooked when he finished.

Install 2 additional power points, move down one existing. Pre wire 2 led strip lights

I have a number of outdated existing light fittings in my office. I would like to replace these. 6 wall mounted lights 4 down lights. I have the new items ready to go, and existing in wiring is in place. They just need fixing.

I need the following floor lamp rewired as the light keeps switching on and off automatically. Seems like the connection is faulty after 4-5 years

Safety switch is tripping , we turned off and unplub both appliances which are connected and still doing it.

Supply and install a new office LED light that matches existing lights (see photos). Must be licensed electrician.

When the light/exhaust fan goes on in the bathroom, it shorts out the house. Also, i need the outside light to be fixed

Hi, I have a wall power outlet that has come loose and is not sitting flat against the wall. I need a licensed electrician to fix or replace it safely

Hi there, I have a switch that, when turned on trips up the electricity in the house. It’s the switch to my backyard light. I separately have another switch, which needs the switch to be replaced with a new one. That other switch is unrelated to the one that causes a short circuit.