Find a reliable appliance technician in Prahran

Looking for someone to repair my LED heat therapy machine. When we press the power button, the machine turns on and starts the boot process, but it gets stuck on standby mode and the touch screen does not respond. Please let me know if you have experience repairing similar beauty or salon equipment. Located in Melbourne.

Cut out a space for a dishwasher under bench in an existing kitchen cabinet. Still need to maintain the appearance of the kitchen. I want to be able to have the remaining cupboard space under the sink as well so a small door or a blank can be installed between the edge of the dishwasher and the next door. Pillar will need to be moved across. I have some photos with the measurements. Dishwasher is 820mm high, 600mm wide and 570 deep. Parking is off street (I have a driveway)

Washing machine cycle going far longer than it should and water has not drained. LG front loader.

I need my old slide out range hood removed and the new one installed.

Washing Machine is leaking. Recently moved into new house, so I’m sure it’s an easy fix, likely haven’t put in correctly. Washing Machine is a Haier 10kg front load machine. Had for only 6 months.

Hi, I need an experienced appliance technician to diagnose and fix my Fisher & Paykel dishwasher. Appliance details Brand/model: Fisher & Paykel DW60FC Error code: F30 (flood switch activated) Issue: dishwasher beeps and won't start a cycle What I've already tried Power cycling the machine Checked drain hose for kinks — looks OK What I need Diagnose the cause of the F30 error Drain base tray / reset flood switch if needed Repair or advise on parts if required Please quote your call-out fee + labour. Let me know if you've worked on Fisher & Paykel appliances before. Located in Windsor — easy access, parking available.

The ignition spark things on all four elements )burners)all came on when I turned the oven and they won’t turn off. No gas leak but the sparks keep coming unless it’s turned off at the wall.

Fix my GHD straighter or recommend a shop that will

Second glass door needs to be reattached securely. Or quote to replace door if needed.

Washer/Dryer machine error ‘OE’. Have drained and cleaned filter, and turned off, still not completing cycles. It is an LG Thin Q machine.

Looking for a qualified electrician to replace electric stove with new model - like for like replacement. Compliance paperwork required. (60cm stove)

Rebooking task between Anthony and Dan

Washing machine isn’t draining, it is an lg front loader

Samsung front loader (BubbleWash 7.5kg washer/dryer) Door rubber seal/gasket has a hole and needs replacing Please supply correct part and install Located in Prahran Photos attached Model: WD75J5410AW/SA

Blanco D13 error Troubleshooting the D13 Error: Check Water Inlet: Ensure the dishwasher's water inlet valve is fully open and that the water supply is hot enough. Inspect Heating Element & Sensor: Test the heating element for continuity using a multimeter to see if it needs replacement. The temperature sensor (thermistor) should also be checked for damage or loose connections. Clear Blockages: Inspect the filters and drain pump for blockages, as restricted water flow can lead to temperature detection errors. Reset the Machine: Try to reset the dishwasher by turning it off or unplugging it for 5–10 minutes. Inspect Float Switch: Check if the float switch is stuck, which can cause issues with water levels.

The machine is not draining the water , I tried to clean the filter, doesn’t work

Door for dishwasher had come off, don’t have appropriate tools, need help or advice.

Need help with removing a bifold door off my European laundry, pulling out old washing machine and installing a new washing machine, then reattaching the door. Hoping to get it done today (17/12)

Seeking an experienced technician to fix the E14 error on my Bosch dishwasher. Please only get in touch if you’ve successfully dealt with this issue before.

Dishwasher came up with the E31 error. Drain isn’t blocked, haven’t touched water supply, cleaned it out. Tried resetting it and fault still appearing. Located in Prahran. Early Friday morning visit please.