Hire a professional washing machine services in East London

Washing machine keeps leaking every time I try to wash

Fuse tripping when turning on washing machine.

Washing machine drum not spinning, seems like something fell out inside and restricted.

Washing machine is jumping around - we suspect it was installed incorrectly (the machine was 'professionally' installed by Marks Electricals). We suspect that either the shock absorbing mat is not right, or the machine was not levelled properly, or shipping bolts were left in a new machine. Need help figuring out the reason and fixing it. We will provide photos and further details. If you think some specialised padding is needed please direct us and we can buy it before the date of your visit. As you can see from the photos, the WM has moved out from under the kitchen counter quite a lot and the legs are now hanging over the shock absorbing mat. We don't know if it was like that initially or happened over time. Budget negotiable.

Waste Water from Washing maching overflowing to the Kitchen Sink more than expected, leaving soap resdue i the sink.

I’ve got a new washing machine which needs to be installed. The old one is still here and is hard wired into the wall rather than a plug and would require the same with the new washing machine

Hoover washing machine is not emptying water and giving e14 error

Washing machine on front balcony

Washing machine needs fixing - won't spin, likely as water not draining properly. Done some initial investigation but now need a professional. Machine will need pulling out of its position which will be difficult. Machine: Indesit IWDD washer-dryer (7kg + 5kg) Symptoms • Won’t spin. Spin-only cycle: timer counts down but motor never engages - no sound, no attempt to turn. • Drum rotates freely by hand. • Door lock engages correctly (single click on cycle start). • No error codes displayed. Diagnostics performed so far 1. Pump filter cleared. Removed kickplate, drained via filter, found a significant plastic blockage inside. Removed it. Impeller inspected — looks intact, spins with magnetic detents (normal). 2. Spin re-tested after filter clean - still won’t spin. Empty drum, so not an imbalance issue. 3. Drain/rinse cycles confirmed pump runs - humming/whirring audible for ~30 seconds. 4. Tilt test revealed water still sloshing in drum despite pump running and filter being clear. 5. Rinse + spin cycle attempted - significant water came out via filter afterwards, confirming pump is not fully clearing the drum. Best Guess So Far Pump runs but flow is restricted. Spin is then inhibited by the pressure sensor detecting residual water (safety interlock), which explains why the motor never engages. Possible causes: 1. Blockage in the sump hose (corrugated rubber hose between drum and pump) - possibly secondary debris from the original plastic blockage. 2. Damaged impeller blades not visible from filter side. 3. Weak/failing drain pump. Not yet checked • Sump hose (would require tilting machine). • Pressure sensor / pressure chamber hose. • Motor carbon brushes

In the same place as old machine

I need two washing machines uninstalled at two different properties 20 minutes apart and then one of the uninstalled washing machines are coming to the other property to be installed. This will need organising by the Air tasker

Dual Washing and dryer machine has F02 error. Can this be repaired or do I need a replacement ? I have already unplugged and back in, allows a wash cycle to start but returns to F02 error shortly after

Door seal and retainer ring need to be swapped out on my washing machine. I already have the replacement parts and only need labour. Series 5 WW90T4540AX/EU

My LG washing machine is making loud noise when spinning

blockage might be further down in the main drainage (possibly inside the wall or building connection), which is why the sink and washing machine are both not draining properly. Need a plumber with proper equipment to clear the main line

Lamona washing machine error code E1. Manual says water inlet valve fault. Need someone to fix this and clear out the water inlet and washing machine filter

Washing machine SMEG WDI14 C7

washing machine door sealant replacement PROFESSIONALS ONLY I already have the part Only labour needed to fit part

Washing machine stopped working in the middle of a cycle and the clothes are stuck inside. Please help!

Washing machine needs to be connected to water supply under kitchen sink.. May need to add a new valve to pipework to allow connection. Plus a minor leak under sink, may need resealing or quick fix with plumbers mait.