Find trusted awning repair experts in NSW

Hi, I need someone to repair the damaged timber shade/awning at the front of my house (see photo). The top section of the awning has rotted/damaged wood, and part of the covering is coming apart. I need: • Inspection of the damaged timber • Removal of rotten/broken sections • Replacement with new timber/boards • Sealing + repainting to match the existing colour • Ensuring the structure is sturdy and weather-resistant The area is easily accessible from ground level. Location: Glendenning NSW 2761 Photo attached. Budget: $250 – $300

I need a framed awning put up on a wall outside my house

Remove folding arm awning , measures 7.8m by 4m motorised. Currently Fixed into brick wall.

I HAVE A TIMBER DECK AND AN AWNING ABOVE IT. WE RE-NEWED AWNING TIMBER STRUCTURE AND TOP & CEILING COVERS LAST YEAR. THERE ARE THREE POSTS UNDER THE AWNING WHICH NEEDS TO BE FIXED/REPLACED. ALSO SOME BEAMS UNDER THE TIMBER DECK ARE ROTTEN AND NEED TO BE FIXED/REPLACED. I AM NOT SURE ABOUT THE BUDGET, I JUST PUT $2000 AS I MUST FILL THE BUDGET SECTION IN AIRTASKER

Hi, I need a licensed carpenter or builder to assess the mounting requirements for a retractable awning and then install it. Job includes: • Assessing the exterior wall to confirm suitable mounting points • Advising if any additional supports or fixings are required • Installing the retractable awning once mounting is confirmed • All tools to be supplied by you (unless manufacturer-specific hardware is included) Awning details: • To be confirmed post initial assessment. Requirements: • Must be a licensed carpenter or builder • Must be fully insured • Please provide your licence number in your offer • Experience installing awnings or shade structures preferred

Need to paint in Salmon colour front of shop, wall above awning and front strip of awning all in the same colour

The arm on our awning has been detached from the canvas in a high wind. It needs a nut to hold it back on so we can wind in the awning

Outdoor awning needs to have a canvas patch applied to tears being caused by the rollers. I will supply adhesive canvas patch. The awning rollers will need to be unbolted & repositioned as well. Need someone who is familiar with awning repairs

Fit awning above my solar battery. Awning is assembled and it comes with the fitting bolts.

Need a kings 270 xl awning installed. Have the heavy duty brackets there. To be fitted to roof rack cross bars.

I purchases two of these aluminium awnings which I need installed above my external solar battery in the side lane of my house. Size is 0.8m x 1.2 m https://www.carportsandoutdoors.com.au/products/aluminium-bracket-awning-white?variant=49021840064819

Need a handyman for two jobs: 1. Reattach top hinge on a timber-frame security screen door (without removing the whole door). 2. Repair small sections of timber rot on side brackets of window awnings - just patch or replace the damaged bits, not a full rebuild. Photos attached. Located in Milperra 2214.

In need of someone to come cut take down an takeaway my metal owning coming off my garage and shed

We’re looking to have someone (likely 2 people) hang an 3Mx2.5M awning outside. It weighs 300gs/m and will be going into our concrete wall.

Few minor jobs: Install 3 Small window owning, Patch and paint mutiple holes Small ceiling lining, paint 5 doors. It is a about a long day work. I can help if needed. Task price is hourly rate. If finishes in less than a day still will pay for a long day based at 10 hours work so 400 is minimum pay on the top of Airtasker payment. But need an invoice.

Kings side awning install 1. Adventure Kings 2.5m x 2.5m Side Awning • Dimensions: 2.5 m (vehicle side length) × 2.5 m (pull-out depth) • Rating: UPF50+ sun protection, waterproof canvas • Hardware included: 2x L-shaped steel mounting brackets, U-bolts, nuts, washers • Frame: Aluminium with telescopic poles & arms • Bag: Heavy-duty PVC cover • Accessories included: Guy ropes, steel pegs, telescopic legs (integrated into frame) ⸻ 2. Adventure Kings 2.5m Awning Side Wall • Dimensions: 2.5 m (length) × 2.5 m (height) • Material: Waterproof polyester with UV coating • Fixing system: Heavy-duty zippers and Velcro tabs (attaches directly to Kings awning) • Purpose: Provides shade, wind protection, and privacy on one side of awning ⸻ 3. Rola Drop & Turn Channel Bolts (M8 x 20 mm, 4-pack) • Thread: M8 (1.25 mm pitch) • Thread length: 20 mm • Base: Drop-and-turn style head designed for T-slot roof rack channels • Material: Stainless steel • Function: Secures Kings L-brackets into Thule WingBar Edge T-slot

Hi there, I'm looking for a professional or experienced handyman to refresh the awning of my third floor balcony. Dims of area: Approx 764cm long x 100cm at the widest part. Height around 2.5m She's looking a little tired with cracked old paint (attached photo of the worst part), assume it will need a good sanding down then a fresh coat of white paint. There is some rot (?) to the wood at the edges so I'm open to hear how you might tackle this. It doesn't have to be perfect, just tidy - so if i can get away with not replacing these parts of wood that would be great! We do have a small cat enclosure beneath part of the area, could remove the roof of this for access if needed. Must have insurances and safety equipment if necessary. I'm around Wednesdays - Fridays so if those days are convenient, I'm flexible on times :) PLEASE NOTE: My 'offer' is not in any way accurate. I have to put something in as per AirTaskers rules. I'm open to any quotes that are reasonable and in line with your pay expectations based on your skills, experience and current Sydney market rates. In your quote can you please specify the scope inc. works you see need completed and rough time estimate. Thank you!

Installation of a window awning.

I need an awning to be assembled and installed into a brick wall above my solar battery system. The battery system is installed down the side of my house as pictured and I have purchased a basic awning that is 1.5m wide and 1m deep. It needs to be installed as pictured (MARKED IN RED). Approx 2m high from the base metal platform pictured. Will require a basic tools (hammer drill, plugs and strong bolts to secure and a ladder). Awning is new in the box and needs to be unpacked and assembled and will look like as pictured.

Description: I need help installing a prefabricated outdoor awning (see attached diagram). The frame and materials are already on site and ready for assembly. Details: Awning type: Polycarbonate sheet with metal frame (see diagram for reference). Installation location: Above balcony/doorway (requires drilling into brick/concrete wall). Size: 2000 mm width, 7000 mm long Materials: All parts supplied. Task requires: Tools for drilling and fixing into wall Ladder or suitable access equipment Ensuring watertight and secure installation Other Notes: Please have relevant handyman/installation experience. Must bring your own tools and fixings if required. Flexible with time, but would prefer installation within one month. Budget: $400