Find a local floorboard profesional near you

Hi, I need someone experienced to repair hybrid floor boards. Around 4 hybrid floor boards/tiles need to be replaced. Blue tape are placed where the boards are cracked in the pictures I will supply the replacement boards, and I only need someone to: ● Carefully remove the damaged floor boards ● Install the new boards correctly Please let me know your experience with hybrid flooring repairs and your quote for labour only. This job is in baulkham hills..

Need to remove and install hybrid floor board, at least 9mm 25 sqm apartment unit, 5th floor

We have recently ripped up carpet. We want to sand and polish the bare floorboards in living area and hallway, with a subtle, natural stain to match other areas of house. Approx 20sqm. We also want to discuss re-polishing the small kitchen area too. Please note: - please bring all materials and clean up dust before polishing - needs minimum 3 coats of water-based polyurethane (including primer) - no stairs, easy access

We have recently ripped up carpet. We want to sand and polish the bare floorboards in living area and hallway, with a subtle, natural stain to match other areas of house. Approx 20sqm. We also want to discuss re-polishing the small kitchen area too. Please note: - please bring all materials and clean up dust before polishing - needs minimum 3 coats of water-based polyurethane (including primer) - no stairs, easy access

I have a small section of floor in the hallway of my older property on stumps with a few floorboards that creak and shift when stepped on. I need someone to crawl under the house and shore them up from underneath. - I am told there is a decent amount of room under there considering stumps - There is insulation batts that will likely need to be shifted during repair and that must be returned to properly sealing the gap after - I am open to whatever method you think will work but it cannot be visible on the floor above and must be suitable long term.

We have a few floorboard that need replacement in the hallway area.

A 2.9m X 3.8m room requires wooden floor board installation and wall woodwork panels installation. Materials onsite. Wall power outlet repositioning, see picture. Require quality assurance.

Hi there Water from the shower has slightly warped the boards, please see photos. Just want to get rid of gaps if possible. I do have spare boards if needed too. Thanks

Hello, I need the room carpet changed to floor board and there are 15 step stairs carpet changed to new as they stink and make the house stink. As well as new skirting in the house but that can be done separately or latter. Mainly after the carpet for now. Really short on money as tenants didn’t pay rent for 6 months had to go through VCAT and they left everything in the house with cat little and sh*t all over the place. Just need it fixed so I can rent it up again. Thank you

Hey, I need carpet removed and floorboard installed in two bedrooms. Each room is 2.7m x 3x total 16.2m2. There is concrete underneath the carpet. Remove carpet and underlay Remove tack and smooth edge and staples Dispose of carpet and underlay Install floorboards Cut around doorways Installations where needed Leave rooms clean and tidy I will supply the floorboards. Let me know if quote includes disposal, trims, underlay and moisture barrier if required and any flooring prep. Looking for someone with experience and the right tools.

Floorboard repair, cosmetic

Need help fixing the flooring near the fridge area, to get the flooring done properly so that it’s covering the full fridge area. Remove existing if necessary and relay so the flooring will flow properly and not like It’s patched up. Spare boards available for use.

Hi there, I am moving out of my apartment in St Kilda and need a small chip repaired on a floorboard so it passes my final rental inspection. The Problem: It’s a single deep gouge about the size of a fingernail (see attached photos). The dark core of the plank is exposed. The Goal: Fill and color-match the chip so it blends in seamlessly with the surrounding wood grain and matte finish. What you need to bring: You will need to supply your own color-matched repair materials (hard wax kit, laminate repair filler, or professional epoxy) to match the light oak/tan tone of the floorboards. Looking to get this done as soon as possible before my move-out date. Please let me know what materials/method you plan to use when you place your offer. Thank you!

Looking for someone to help touch up some laminated floor boards in my apartment. It just needs to be blended in, I understand it won't match the same exact look. (I'm not sure if this is laminated, happy to be corrected). Please share your quotes

Hi, I've run out of time so am looking for someone more experienced than me to help lay and cut hybrid flooring for one bedroom. The underlay is down. Please have your own saw as I've only got a hand saw and a multi tool.

I have damaged the floorboards in my rental in two places due to pot plant drainage issues, see attached photos. I'm looking for a reasonable quote from an experienced tradesperson to fix these. Evidence of similar work in the past would be appreciated. Location: Preston Thanks!

I need the floorboards in my rental property sanded and polished. The house is empty and the area small. Can be done anytime/any day before Wednesday 10/06/26. See photos for current condition, photos of the area and floor plan showing the size of the lounge/dining.

Looking for a quote to replace approximately 5–6 damaged hybrid floating floorboards in an apartment. Replacement boards are already on site and match the existing flooring. The current boards were previously replaced using the wrong thickness (7.5mm instead of 6.5mm), resulting in a noticeable lip between boards. Scope of works: * Remove incorrectly installed boards. * Install supplied replacement boards (6.5mm thickness).

Task: Floorboard Prep Sanding & Polishing Brief description: Lightly sand, prepare (take out any random staples/leftover nails from carpet removal if any, fill any cracks or holes), and polish floorboards of 3/4 of a house (see floor plan red circle area). Please apply x3 coats of polyurethane as per usual standard. Details: • Location: Doncaster • Access: Easy driveway access, single story, no furniture or obstacles • Tools/materials: You’ll need your own tools and products for prepping, sanding, polishing. Scope: • 3/4 of house (see picture floorplan) • Vacuum/clear up sanding dust before polishing Timing: Around 12 - 21 June. Please quote your total price and confirm availability around 12 - 21 June. Experience with similar timber floor jobs required.

Area 1: Cut out 1000 x 800 approx and replace Area 2: cut out 2x boards approx 1000 x 1000 and replace