Find an experienced flooring expert near you

Had to remove some water damaged laminate boards after a leaking tap caused them to warp. Was able to remove them bht need someone to install the replacement boards that has expertise. It's about 1.5 sq metres I have the replacement boards

Quick step floorboard installation (tongue and groove) and skirting board installation for a 2.5 x2.5m room.

Helping to lay floating floorboards

PLEASE DO NOT ANSWER IF YOUR NOT GOING TO TURN UP (I have so many people not turn up and not even let me know ) I need Lino installed to kitchen and dining room. I would like someone local to Tailem end so they can have a Quick Look at the job. Needing it installed asap. I will pay for the Lino from Bunnings or flooring place if you are able to pick it up please. Would be a bonus if you know how to do other handy thing like reconfigure kitchen and put a Bunnings bench top on it which will be a seperate job. Thanks!

Hi there, I’m looking for an experienced handy person or flooring installer to complete a laminate flooring job in my kitchen, dining room, lounge room and hall area approximately 70 sq metres in Katoomba NSW. Scope of works: Prepare subfloor (clean and level check) Move furniture as required to lay laminate (I can help with this) Install underlay (supplied) Install laminate flooring (approx. 70m², supplied) Install transition strips at doorways (e.g. laminate to carpet where applicable) Install scotia/trim to finish edges Areas: Kitchen Dining Lounge Small hallway Materials: Laminate flooring supplied (lightly used, only down for ~3 months, in good condition), 5G click lock system. Mostly lightly used but there are 2 boxes of brand new laminate. Underlay will be supplied. Scotia and transition strips - can be supplied by me, or purchased by you and I will reimburse costs. Important notes: Looking for someone with experience installing floating/click-lock laminate flooring, particularly reused materials Must be familiar with correct expansion gaps, staggered laying, and doorway transitions Own tools and equipment required I understand that re-using laminate means results will not be what would expect with brand new laminate - I just want neat, well laid floors. Timing: I'd like the job completed over the easter long weekend if possible.

About 60sqm flooring laminate straight over my tiles

Looking for an experienced decking installer to supply labour only for a small outdoor patio in Bellevue Hill. • Area: ~30sqm composite decking • Materials: Already sourced (white composite decking boards) • Scope: • Build subframe (likely on existing pebblecrete surface) • Install decking boards (including cuts around angles) • Advise on and install appropriate fixing system (clips etc.) • Clean, professional finish with neat edges (picture frame preferred) Site details: • Ground floor patio • Easy access • Irregular shape (refer to plan – not a simple rectangle) Requirements: • Prior experience with composite decking (WPC) • Own tools • Ability to advise on subframe design and spacing • Attention to detail – this is a visible entertaining area Timing: • Flexible, but ideally within the next 1–2 weeks Optional (please specify): • Supply of subframe materials (timber/aluminium) • Supply of clips/fasteners Please include: • Photos of previous decking work • Rough estimate or day rate • Availability Happy to be reasonable with pricing. Please provide your quote.

I need 130m2 skirting done before 4th of April

Looking for someone experienced to install laminate flooring in a small kitchen area (approximately 2.8m x 3.0m) Current floor: - Floor is already clear - No existing flooring to rip out - Note: There is a dishwasher in the kitchen that will need to be temporarily moved out and then put back after the flooring is installed. Materials: I haven’t purchased the flooring materials yet. If you can advise what’s required (laminate boards, underlay, trims/scotia etc.), I’m happy to purchase everything before the job. Job includes: - Installing laminate floorboards in the kitchen area - Cutting boards to fit neatly around walls/cabinets - Installing trims You will need your own tools

Timber lining panel installation required 3 x walls 2.8 x 2.8 meter approx 1 x wall 2.8 x 6 meter approx I can supply timber panels you will cut to measure and install in Granville

Install floor trim under front door to ensure door doesn’t get caught on floating floorboards when they swell with heat and moisture.

Qualified floorboard installer needed for a ensuite (includes a walk in wardrobe). All materials will need to be included. -Floorboards -Underlay -Scotia -Door transition strip. Can organise a day for a quote/consultation and then set up a day for it to be completed. The room will need to be completed to a similar color to the rest of the rooms. Hoping to have one day for consult and day two for work and completion.

52m2 of laminate floor installation. Flooring and underlay is already onsite, just needs to be installed. House is located in Mill Park.

I have 9 sq m of hardwood flooring that needs to be laid over new sub floor. It's 12mm tongue and groove hardwood. I have the new boards. I'm after a professional carpenter/ flooring installer. You will need your own secret nailer. If you can sand and Seal too please let me know. Existing is poly matte finish.

I’m converting a small storage room into a study nook and need floorboards installed to cover an exposed concrete subfloor where built-in cabinets were recently removed. The job involves three tasks: 1. Lay Floorboards ∙ Install supplied (matching) floating floorboards to match the existing light timber flooring in the adjoining area ∙ Boards need to butt up neatly to the existing flooring at the threshold ∙ The subfloor is bare concrete with some old adhesive residue from removed cabinetry – light prep/levelling will be needed before laying ∙ Please bring underlay – I don’t have any on hand 2. Install Skirting Boards ∙ Install supplied skirting boards around the perimeter of the are as shown in the photos to finish the floor edges clean 3. Patch Holes in the Wall ∙ There are a few holes and damage spots in the walls left over from the cabinet removal ∙ Please patch and prep the walls ready for painting – I will do the painting myself, so just needs to be sanded smooth and ready to go. I will supply the filler for the wall patching. This is a relatively small task for someone that knows what they are doing.

some pavers need to be removed to install a merbau deck in its place 14m2.

New office pods need floorboards installed. Each pod 2.8m x 3.2m. I will provide floorboards (6mm Hybrid Waterproof), you bring tools.

Hi, I renovated 15 yeas ago. Having carpet layed in my bedrooms. At the time the floor boards very soft in areas and the builder laid some type of tin product over parts on the floor …. I didn’t need new boards in the bedrooms. Now… I can feel a floor board is broken in another area. Hoping the carpet can be lifted and the area fixed.

Remove carpet and install Bunnings vinyl floorsheets on 48sqm. All furniture has been removed. Vinyl floorsheets already supplied. Vinyl floorsheet model is - Senso 2m Rustic Wood DIY Practica Sheet Vinyl One room already has carpet removed. See floorplan. Additionally - Remove carpet only from approx 30sqm of other living areas to expose existing jarrah wood underneath. No floorsheet installation required on this. All furniture has been removed. Floorplan with instructions has been uploaded to the image section of this task.

Timber floor. Sanding and polished. 62 square metres approximate area. Requesting offers please and further negotiations

7-8m2 floor polishing to blend into existing

Timber flooring sand and polished asap

Sand and re-polish existing engineered timber floors in a Banksia apartment. Floor boards currently have wear / scratches. Scope: -45.5 sqm engineered timber — entry, living, dining, 2 bedrooms -Full sand and polish, 3 coats (sealer + 2 top coats) -Water-based polyurethane finish (satin or matte) Currently a rental apartment but will be vacated and available for the works to take place after 5 April 2026.

We have a shop with polished concrete floor, we need it re done

We have two decks that needs a good clean and polish. One deck also need some minor repairs. Happy to share pics

Have got floating timber floorboard that needs to be cleaned and polished up to revive the look and get rid of all scratches. Around 75 sq mtrs give or take

Whole floor sand and polish

match existing pine flooring. kitchen cabinets removed, couple of pipe holes also require filling. thx.

Need polish of the front and back deck Very well maintained just need a fresh look

Sand and polished floor boards in a three bedroom hallway living dining room house single story Bedroom1 - 4.0x3.0 Bedroom2 - 4.2x3.2 Bedroom3- 4.0x4.3 Dining - 3.6x3.7 Lounge- 5.8x4.3 Hallway tba Location 3084 Rosanna

sand and polish an existing timber floor in a two bedroom unit

Looking for someone to sand and polish timber floorboards in my unit. • Timber appears to be cypress pine Please mention how much the quote is going to cost • Floors are in decent condition, just need sanding and resealing

Sand and polish around 40 Sqm fooor

I need an experienced flooring professional for a two-stage job in my kitchen in Aspley (QLD). Stage 1 – URGENT (before 17 Feb): • Remove existing cork flooring and cement sheet underlay • Deal with nails/staples properly • Leave timber boards clean and ready for kitchen renovation This part must be done before 17 February. Stage 2 – After kitchen renovation: • Sand and polish the timber floor • Match the finish to the rest of the house (appears gloss, but to be confirmed) • Open to professional advice on finish type to ensure a good match Area size: Approx. 2.4m x 2.4m What I’m looking for: • Experience with older timber floors • Own tools and sanding equipment • Ability to match existing floor finishes • Clean, professional workmanship Kitchen renovation is underway — sanding/polishing will be scheduled once installation is complete.

Looking for someone to remove lino and sand/polish floorboards.

Need to sand and polish 5 bedrooms, two living , rumpus , walkways. Need to retain the patterns. Refer to photos

Need a sand and polish of 27 sqm of wood flooring

Area is roughly 110m2, looking someone who can give quote.

Remove carpet, sand and polish floorboards underneath. Dispose of carpet. Tools to be supplied by you. 2 bedrooms only, 27sqm in total.

8 - 12 boards on wooden floor need sanding to remove small areas of scratches and then refinishing with polyurethane varnish.

I’m after a free quote to sand and refinish solid hardwood floors across two levels (about 190 m²). I prefer a water‑based finish. The lower level (kitchen/dining) has worn high‑traffic areas; upstairs is mostly fine, so I may only do the lower level depending on the quote. House is empty except for a few small furniture items that can be moved. Please include in your quote: - Scope: screen & recoat vs full sand per level - All materials and labour (including brand/type of finish and number of coats) - timeline (days) - Cost for any board repairs or skirting removal (if needed) - Warranty and earliest availability Sample pictures of the high traffic areas are attached. Location: Bexley North.

3 bedrooms house in wantirna, hardwood floor needs sanding and coating. Not sure how much it cost, quote on site? or square meter price?

Hi there, We have Merbau decks that need to be machine sanded back ( we will hire sander from Bunnings for you) but first the nails need punching in a bit to allow sander over. Then it needs restraining. At Toowong. Thanks!

Timber floor repair / sand and refinish small damaged patch I need someone experienced in timber floor repair to inspect and fix a small damaged/discoloured patch on polished timber flooring near the skirting board. The area has surface wear / sanding marks / finish removed, so I need someone who can: assess the damage properly advise whether it needs spot sanding and colour matching re-stain / recoat / refinish the affected section so it blends with the surrounding floor as closely as possible

Sand and refinish timber floor in small room (~9m²). Looking for experienced floor sanding professional (not handyman). Want a light Scandinavian/blonde finish with matte seal—no yellow/orange tones. Please include materials and 2–3 coats. Must provide photos of similar work. Prefer test patch before full job.

We are putting our house up for sale and need some help replacing with some damaged floorboards. And also stopping other floorboards squeaking in the hallway. There are some other odd jobs I'd love some help with. We can discuss if we meet up.

Want a slightly darker/less orange colour that will not show as much dirt and not scratch so easily. The treatment on the floor currently is not enough for the foot traffic we get in the store. Scratching in one room but minimal scratching in the other. Both about 6x4 rooms

We have Baltic pine floorboards that need refinishing (sanding and polish) They are currently overlaid with vinyl flooring which will be removed before works commence 2 rooms at roughly 30sqm total

Looking for someone to sand back and refinish my outdoor timber bench seat, then seal it with a durable natural matte finish. Bench seat is removable and can be taken away to complete off site. I would like pickup and return included. Size Approx 3.0m long x 0.4m wide. Finish required Natural matte, low sheen. Prefer the most durable option for outdoor use. Happy to follow your recommendation, but I am leaning toward a quality exterior decking oil in a natural matte finish for longevity and easy maintenance. Scope of work: - Transport off site - Sand back to an even finish (top and edges, tidy up the ends, bottom if needed) - Prep and clean properly before coating - Apply stain if needed to even out colour, otherwise, clear natural is fine - Apply exterior grade protective finish in natural matte (2 to 3 coats as required, coat all faces including: top, edges, and ends and bottom if recommended) - Return Please include in your offer • Total price including materials and pickup and return • Product system you will use (brand and type if possible) • Estimated turnaround time • Photos of similar outdoor timber refinishing work Timing Flexible, ideally within 7 to 14 days.

We have removed the carpet from our staircase, and it need sanding and refinishing. Total 15 steps Pls send me your quote price

Refinishing of timber floors (downstairs) in a Reservoir townhouse. Approx 40m2. Refer floorplan I've highlighted in blue the extent. There are some gaps between boards that need to be filled in a few areas. Sand and refinish floors to new condition. Use hardy sealer / polyurethane coat. House has been recently painted and new carpets etc so dust suppression must be used.

I have approx 35 square metres of floorboards that need sanding back to bare timber. I don’t need them refinished as we will do that.

Looking for an experienced tradie to fully sand back and properly refinish internal timber stairs. Anytime between 20th and 25th Jan Details: Approx 14 timber treads (including winders) Existing finish is worn on nosings with a few scuffed areas 2 small gouges to be repaired with timber filler Require full sand back to bare timber (not just a light scuff) Refinish with a high-quality stair-grade clear varnish or polyurethane Minimum 3 coats, suitable for stairs (durable, non-yellowing) Materials to be supplied by you and included in the price Clean, tidy job with proper prep and cleanup Please include in your offer: What product/finish you will use (brand + water/oil based) How many coats Estimated timeframe and drying time between coats Examples of similar stair work if available Home is occupied, but I will be out each day, however walls have just begun painted , so clear communication and care with dust and drying is important. I’ll check quotes later today, will reply then.

I need a small section of timber floorboards (doorway area – see photos) sanded back and refinished to match the surrounding treated floorboards as closely as possible. The area was previously covered by tiles and has old adhesive/paint residue and uneven finish. I’m after a professional result that blends in with the existing floor. Scope of work: • Sand back the existing timber boards to bare timber • Remove all residue/old finish • Prepare surface properly (fill if required) • Stain/colour match to existing floorboards • Apply suitable clear protective coat (polyurethane or similar) • Clean up after job • Supply and apply all required materials Details: • Area size: approximately 1100mm x 1100mm • Location: indoor hallway / door threshold • Access is easy • Photos attached Requirements: • Experience with timber floor sanding & finishing • Own tools and materials preferred • Ability to colour match existing floor as close as possible

Hi there! I'm looking for someone to restore the back deck of my house in Heathmont, Melbourne (approx. 22m2, including steps and balustrades). The job includes: Sanding the deck back to bare timber (currently weathered/old finish) Smoothing edges, steps, and tight spots Cleaning & preparing the surface for finish Applying deck oil or stain (supplied or agreed upon) Requirements: Own equipment (random orbital sander, vacuum attachment, brushes/rollers) Experience with timber decking restoration Ability to complete efficiently and neatly Reliable, punctual, and professional Timing: Flexible - hoping before Christmas but understand if that’s not possible. Payment: Open to quotes. Please provide your estimate

Approx 26,60sqm of decking needs to be sanded down and refinished at my place. Divided in 2 different areas (front and back balconies). Easy access, floor level, timber in fair condition, no damage. Please send me an estimate or quote. Needs to be done before end of Jan 2026 but as soon as possible really. Cheers.

I am seeking an experienced and professional flooring specialist to complete a high-quality refinishing of my indoor solid hardwood flooring and spiral staircase. This project requires proper equipment, attention to detail, and the ability to deliver a smooth, uniform, premium finish. Scope of Work 1. Timber Floor Refinishing (Approx. 40 m²) Sanding & Surface Preparation Fully sand timber floors back to bare wood using professional-grade sanding machinery Precision edge sanding and detailed finishing at corners, skirting boards, and transitions Surface preparation including: • Filling minor gaps where required • Smoothing sanding marks and imperfections • Levelling surface to ensure an even base prior to coating 2. Application of Premium Clear Coatings Apply 2–3 coats of high-quality, non-toxic, water-based clear varnish Light sanding between coats (if required) to achieve a smooth, uniform finish Materials can be supplied by me, or you may provide a quote inclusive of all materials and labour 3. Final Protective Seal Apply a final non-toxic protective sealer for enhanced durability and scratch resistance Ensure a consistent, even, high-quality finish across the entire floor area Maintain and highlight the natural timber grain and tone 4. Spiral Staircase Refinishing (14 Timber Steps) Careful machine or hand sanding of each step, including treads and risers Precision detail finishing on edges, corners, and curved spiral sections Application of matching varnish/stain and final protective sealer Consistent finish to match the main flooring area Extra attention to drip prevention, smooth transitions, and edge accuracy Additional Requirements: Use of dust-minimizing sanding equipment preferred Clean and tidy workspace during and after completion Professional workmanship with consistent coating results Clear communication throughout the process Option for on-site inspection before finalizing the price

Existing timber floor requires sanding back and refinishing with water based coating system. Approx 147m2 in total Quotes welcome

Timber floor in loungeroom refinished.