Find trusted local electricians in Surry Hills

1. Delete an unwanted GPO (General Power Outlet) and related surface mounted electrical circuit from wall in hallway 2. Relocate/reposition one GPO in a kitchen 3. Replace five broken light fixtures with batten bayonet type light fixtures 4. Replace light switch in the toilet

Just moved into a new property. Install : 3 oysters replacing 3 existing spot lights Install 2 dimmers Make bathroom a double switch ( exhaust and light) Install 24 inc DC fan Move one Powerpoont All materials provided. The fee is the first 3 hour and then pay an hourly rate.

We need a qualified electrician to check 2x power points which are loose and change 1x globe

Looking for a licensed electrician to replace a faulty miniature circuit breaker supplying power to my kitchen. The breaker appears to be dead/faulty: • No power is being supplied to kitchen outlets (fridge, dishwasher, microwave, etc.) • Lights are still working, but power circuit is not • The breaker will stay in the “on” position but does not restore power • The test button is not functioning, suggesting the unit has failed From what I understand, this likely requires replacement of the existing RCBO/MCB unit (Australec brand currently installed), but open to your professional assessment on-site. What I need: • Supply and install a suitable replacement breaker. Location: Surry Hills, Sydney Timing: ASAP Parking: Available nearby

Hello! Needing: 3 x light switches changes 1 x power socket changed I have replacements ready - just require install. All working fine, just old.

I need to remove the overhead hanging kitchen lights to remove the glass bulb pendant and then reattach the same lights

I need a licensed electrician to replace an existing bathroom light fitting located very close to the shower on wall (not ceiling). The current light is an exposed batten holder. I will purchase an IP65 rated sealed bathroom light fitting and need it installed safely. You will need to seal the hole/penetration around the fitting to prevent moisture entering the wall/ceiling cavity

I have a temperzone HWP 35RKSY. There is a constant humming from the unit in the ceiling and it constantly has the flashing "fault" sign on the control panel. A temporary solution I have is cleaning out the red condensate pipes but I need a permanent solution.

Looking for a professional/registered electrician to install new oven in Surry Hills and take away the old one to throw.

A Light fitting to be swapped over from apartment in surry hills to apartment in bondi and vice versa

looking to get a quote for some AV and electrical upgrades in our office boardroom and foyer its quite small. office is in Surry Hills. Looking for AV / Electrical. Budget needs to be $5-10k refer to images attached - need guidance and needs to include AV equipment Obviously need realistic guide on Av costs vs installation to ensure we have enough budget we do not want to source the AV Scope: 1. Foyer TV • Wall-mounted TV in the foyer to play a silent video on loop during the day • All cabling fully concealed 2. Boardroom AV / Video Conferencing • Simple, professional setup for Zoom and Microsoft Teams • Plug-and-play solution (ideally centralised or single-connection) • No visible cords • Integrated camera, microphone and speakers Ideally reuse the TV we have Current set up is manual HDMI/speaker setup really clunky and so messy 3. Optional Open to a digital whiteboard or smart boardroom screen if recommended - this may blow budget. We need a new whiteboard regardless They are after a rough quote let me know if you are interested and if you need to see the place. Have attached photos.

Bedroom lamp needs rewiring

Qualified electrician to change one light fitting (dimmer required) and install a new switch panel (current panel has two switches, new one needs dimmer + 2 switches). I have the light fitting - just need you to supply the panel, switches, and dimmers. Ideally to be completed this afternoon (Thurs 29 Jan) or tomorrow (Fri 30 Jan)

I need an electrician who is able to rewire old fashioned light fittings so that pendant lights with shades are able to be attached. I am also wanting another wall light to be fitted into the alcove of the front door. Would also be keen to take away fluorescent light in kitchen to be replaced by track or spot lighting on your recommendation. Not sure if this can be done? All electrical wires are thick and unable to fit modern pendants, that are too heavy for the existing wiring system. Would need a totally different updated wiring to be able to attach pendant style lighting. There are 6 lights plus one non existent. Would want to commence work in a few days - and get some advice on what pendants and lights would work beforehand.

The NBN cable does not have a proper cap on it, so the wire is exposed and comes out of the port easily. Please supply the proper cap and install on the cable, ensuring it plugs into the NBN port.

Change light fixture to ceiling fan. Got a quote of $150 from a company until late in the month Have the ceiling fan and bracket, tall ladder needed photos attached happy to answer questions

Hello. We have 2 appliances purchased from overseas that need plugs changing to Aus. Both are fine for Australian power. One is a production machine that will run on our 15A socket (pictured). Standard Aus Plug is fine for the other appliance. Need to complete on Monday or Tuesday please

I need a power point installed approximately 4m from another power point. Cable solution for cables

I need a plumber to fix a leaking hot water tank. I tightened the nut but it keeps leaking. Might need to reseal the joint. It is a steady leak (approx. 1 litre every few hours) coming from a joint. It is constant and does not depend on taps being turned on. Location: The water tank is in the attic. Access is easy via a standard door in the wall. Materials: Please include the cost of materials (solder, flux, or replacement couplings) in your total quote. Parking: Free parking is available on-site. Timing: Must be fixed before Christmas. Availability: I am flexible and can meet any time between 7:00 AM and 9:00 PM any day this week. Note: I am looking for a reliable, permanent fix. If successful, I'll reach out to you in the future if I have more plumbing work.

BEFORE DEMOLITION • Isolate and make safe all existing electrical circuits. • Confirm which circuits stay, move, or are removed. • Check if existing wiring meets current safety standards. • Assess switchboard capacity for new appliances. • Remove or terminate any wiring in walls being demolished. ■■ BEFORE INSTALLATION (ROUGH-IN) • Run new wiring for cooktop, oven, dishwasher, fridge, rangehood, and island outlets. • Confirm power point and switch positions per final cabinet plan. • Plan lighting layout (downlights, pendants, under-cabinet). • Ensure compliance with Australian Electrical Standards (AS/NZS 3000). ■ FINAL FIT-OFF • Connect all appliances and lighting after cabinetry install. • Test all circuits and issue a Certificate of Electrical Safety. • Confirm RCD/safety switch coverage for all kitchen outlet