Find trusted local electricians in Melbourne City CBD

Lights aren’t working due to electrical issues.

Hi, We need a fully qualified, licensed electrician to run the wiring (max 1 meter from main point )and connect 1 commercial hand dryer at a site in CBD. The physical hand dryer machine has already been securely mounted to the wall by our team. Your job will be purely the electrical side: Supply and run the necessary cabling and conduits to the location. Install a dedicated commercial power connection/point for the unit. Test the line and connect the hand dryer to the power supply. Provide an official Electrical Compliance Certificate (CCEW) for Strata records upon completion. Requirements: Must hold a current valid Electrical License. Must supply your own standard electrical materials (cables/conduits). Please let me know your availability and your total quote for the job. Looking to get this sorted as soon as possible. Happy to pay per hours basis as well. Thank you!

Licensed electrician required – bathroom exhaust fan replacement & small electrical works Looking for a licensed Victorian electrician to complete the following works: 1. Remove the existing bathroom exhaust fan and install the replacement (fan supplied by me). 2. Install one double surface-mounted GPO (GPO supplied by me). 3. Disconnect and remove the existing chandelier and replace with single plug base * Terminate the existing wiring to a single plug base (supplied by me) for a plug-in LED downlight. * Enlarge the existing ceiling opening if required so my supplied plug-in LED downlight fits correctly.4. * Test all electrical work on completion. Please include in your quote: * Labour only (all electrical fittings supplied by me unless otherwise agreed). * Any additional materials you expect to supply (if applicable). On completion I require: * A Certificate of Electrical Safety (CoES). * A tax invoice. When quoting, please provide: * Your Victorian electrician licence number. * Your REC (Registered Electrical Contractor) registration number (if applicable). * Confirmation that you can issue a Certificate of Electrical Safety for the works

Looking for a licensed electrician for a commercial kitchen. Stage 1 – Tomorrow Isolate and disconnect power to the existing canopy exhaust fan. Confirm whether the existing fan is 3-phase or single-phase. Relocate the existing wiring and weatherproof isolator/switch approximately 2.5 metres to suit the new canopy position. Leave the wiring safely isolated and ready for installation. Stage 2 – Tuesday Afternoon Return after the canopy installer has finished. Reconnect the new canopy exhaust fan. Test operation and confirm correct rotation (if 3-phase). Photos attached. Location: Melbourne CBD Please quote for both visits (labour + materials if required).

need a plumber to fix heat pump and hot water in my apartment

Need electrician to change / repair flickering down light. Will also need to tighten a couple of screws in bathroom handrail and door stop

Need a sparky to remove a light fitting from an office ceiling in the Melbourne CBD. On Collins Between King and William.

Please provide me a quote to install oven (plug in) and electric stove ( hardweired). Photos attached. No power update is expected to be required. The property is in Melbourne CBD and apartment.

Qualified electrician needed for a rental property electrical safety inspection and certification for a 2 bedroom apartment in Melbourne CBD. No current electrical faults. I need it for landlord compliance with regulations only

Issue Description: The circuit breaker keeps tripping in our commercial food court store. We have tested multiple appliances individually, and they appear to be working normally. Based on our testing: * Power trips immediately when equipment is plugged into the P12 wall outlets. * The issue affects multiple sockets in the P12 area. * A chiller/fridge also causes the breaker to trip when connected to P12, but works when plugged into a different power point (P11). * Other appliances, including microwaves and rice cookers, do not appear to be faulty. Suspected Cause: Possible fault with the P12 power circuit, wiring, or wall outlets rather than the appliances themselves.

Looking for electrician to hand up and connect a pendant light, simple, photo attached Plaster ceiling Prefer first thing in the morning 7am any day up to Monday There are multiple downlights near where it will go

Electric hot water heater leakage. Model:.stiebel electron

Replace 4 downlights you will need a ladder. Parking is hard so im happy to pay for a parking station

Looking to remove old phone outlets, security system wiring, sensors, and other unused cables, while locating and retaining the active internet/NBN line. Please message with availability and a quote.

Help me replace 2 LED light bulb, power point button, and drawer slider in apartment

Hello, We are looking for a licensed A-Grade Electrician to replace a faulty downlight at our retail store, in Melbourne Central. The Issue: A recessed LED downlight at the front entrance of our store has stopped working. The ceiling height approximately 4 meters. The Job: The task is to replace the faulty LED downlight. The scope of work includes: 1. Safely accessing the light fitting in the high ceiling. 2. Diagnosing the fault (e.g., failed LED unit or faulty driver). 3. Supplying and installing a new, suitable replacement LED downlight and/or driver. 4. Ensuring the new light's colour temperature and brightness matches the other existing lights. 5. Testing the new light to confirm it is fully operational. Requirements: - MUST be a fully licensed and insured A-Grade Electrician in Victoria. - You must have your own tools, including an A-frame ladder or platform appropriate for a high commercial ceiling. - You must be able to supply a standard replacement LED downlight and driver. - Public liability insurance is required. Location & Timing: Location: 211 La Trobe Street, Melbourne VIC 3000 When: The job can be completed at your earliest convenience. Please state your availability in your offer. Please provide a comprehensive quote for the complete job. Your offer should include all labour costs AND the cost of supplying one new standard LED downlight fitting. Thank you.

Need a licensed electrician to inspect my 2-bedroom apartment living area and confirm whether it is possible to create/provide an electrical point for installing a chandelier. If feasible, I would like: • 1 chandelier installed (see attached picture) • 4 wall lights replaced and installed and also install a Kitchen Chimney and remove old ones. Property is on the 24th floor, directly opposite Southern Cross Station. I would prefer an inspection first before proceeding with the full installation. Please quote separately for: • inspection/feasibility check (ideally NO CALL OUT FEE is desirable) • installation work if feasible

We recently had electricians complete some work in our apartment and there are a couple of ceiling holes that now need to be properly repaired and painted. Looking for someone experienced in plaster repair and painting to make good the areas so they blend back into the existing ceiling. Details: • Apartment located just off St Kilda Road • Standard plasterboard ceiling • Photos attached for reference • Ideally you supply materials (filler, primer, paint etc.) Looking for a clean finish that blends in well with the ceiling. Flexible timing, preferably in the next few days.

Replace the power board which was slightly broken.

5 PowerPoint switches to be changed, one is 3 switch, 4 2 switch - I have the new switches purchased and ready to go