Find experienced deck builders in NSW

Supply labour and utilise the provided off-cut composite decking boards to clad and finish the existing garden frame. Works include measuring, cutting, trimming and securely fixing the composite boards to achieve a neat, consistent and professional appearance. Ensure all boards are aligned, edges are finished neatly, and fixings are secure. Total area around 8 meters

For 3x20m backyard, eggline installation, composite decking for 3x10 and garden bed and pavers & pebbles in the rest of the area

Supply and install decking around 90sqm

Need 4 m solid composiite deck.

Need approx 4m2 solid composite deck with landing.

Existing composite decking needs to be cut back to comply with pest control or deinstalled and re install with the gap required

I'm looking to have our existing composite deck extended in two small areas. Measurements are included in the photos. Must use the existing composite deck material: NewTechWood (Colour IPE) You can either supply it, or tell me how much length to order. The existing deck pattern is continued.

I need a carpenter to assist with a composite decking job for up to 3 days

Looking for an experienced decking installer to supply labour only for a small outdoor patio in Bellevue Hill. • Area: ~30sqm composite decking • Materials: Already sourced (white composite decking boards) • Scope: • Build subframe (likely on existing pebblecrete surface) • Install decking boards (including cuts around angles) • Advise on and install appropriate fixing system (clips etc.) • Clean, professional finish with neat edges (picture frame preferred) Site details: • Ground floor patio • Easy access • Irregular shape (refer to plan – not a simple rectangle) Requirements: • Prior experience with composite decking (WPC) • Own tools • Ability to advise on subframe design and spacing • Attention to detail – this is a visible entertaining area Timing: • Flexible, but ideally within the next 1–2 weeks Optional (please specify): • Supply of subframe materials (timber/aluminium) • Supply of clips/fasteners Please include: • Photos of previous decking work • Rough estimate or day rate • Availability Happy to be reasonable with pricing. Please provide your quote.

Deck Construction – Gledswood Hills • Looking for an experienced contractor to build a composite deck in Gledswood Hills Project Details: • Size: Approximately 25m² • Shape: Rectangular • Material: Composite decking (Ecodek) Scope of Work: • Dig all required footings and prepare the ground • Excavate and level/scrape the area as needed • Construct subframe in accordance with Australian Standards (correct spans and structure) • Supply and install decking boards • Install breaker boards and complete all finishing neatly • Clean and clear the deck/site upon completion Additional Works: • Excavate areas to approximately 200mm depth and remove soil • Install deck lighting with waterproof cabling • Supply and install transformer

We will supply required material, need someone with experience in deck building for the back

need someone to help build decking. 2.5x4.5 will supply all metarial. you just need to bring your tool and finish it. can give you hand if required

Existing 40 yr old timber deck is weathered and needs replacing. I am interested in using a composite material. Deck is on brick piers with three concrete step to the ground.

Ive got a backyard with lawn, want ro build a 4x6 (24 square meter ) composite deck

I want to make a small deck in my patio area, size of deck is around 3.6m x 4.5m. I'm prefer leatherwood Ekodeck or open to your suggestion.

Require 40sqmt of composite decking installation.i will provide material.

The exisiting deck needs to be extended. The dimensions are 5m length and 1m width. The deck is not elevated. It requires some footings to the ground concreted and composite decking to be layed. I'm happy to provide materials if necessary.

-Remove old deck -Rebuild with composite decking and glass balustrade, -Remove waste

Have ordered materials from Clickdeck and Ekodeck to rebuild my deck and backyard stair case. Items from ClickDeck (aluminium frames) are to be delivered soon (Ekodeck materials have been delivered) and am looking for someone to help me put it all together

I need to get the backyard deck change from timber to composite(low maintenance). The area is a rectangular area of 12.5 * 3 meters(a total area of around 36m2)

need a quotation for Timber Deck polishing - Front Entry Deck - Rear pool deck - Post Box Due date: Flexible

Timber post has wood rot at the base. Post needs to be replaced.

3x4m deck 3x1m side 3 x stairs

Approx 54m2. Needs a few replacement boards... nothing major. . See pics for description. Please advise your offer and experience in timber staining. Thanks

Sand and Paint Timber Deck and both privacy screens in courtyard . Deck to be painted a light grey colour and privacy screen a beige crème colour . Privacy Screen approx 2m high. For courtyard dimensions see photos attached .

We're looking for a handyman to help solve a problem with a small section of warped DuraTuff vinyl cladding just outside the threshold of our granny flat. We think a batten of just the right dimensions could push the cladding back in line, provided it can be mounted securely to the existing timber decking so as to resist strong sideways shear. (The warped cladding is very rigid). The batten would need to be durable/external/H3-treated DAR, about 35mm x 40mm x 1000mm (HxDxL) or, for stronger shear resistance, maybe a whole plank?

Description: I’m looking for an experienced decking professional to supply and install a new deck in both my front and rear small courtyards. Scope of works: * Total decking area approximately 18–19 m² * Supply and install a basic, good-quality decking material (open to recommendations) * Construct a neat, level, professional finish * Remove and dispose of any waste upon completion Requirements: * Proven experience building residential decks * Please provide photos of previous decking projects or a portfolio of similar work * Must have appropriate tools and experience * Preference will be given to experienced tradespeople with strong Airtasker reviews Please include in your quote: * Estimated timeframe * Earliest availability I’m looking for a quality finish at a competitive price.

Timber deck built in 2024, exposed to the elements and has been losing its colour. 35sqm in total, easy access via driveway

Oiling spotted gum timber deck approx 22 miters and move stuff and put back

Timber decking 70m2 Remove Bar Remove fencing Remove tiles in back area Remove timber planter boxes Dispose of all rubbish + plants

Seven year old timber deck restoration. 5m by 2m in size. Deep cleaning and proper sanding. Timber treated/protected against rot, mould and weather and finished with a high-quality UV- and water-resistant decking oil or stain (preferably non-slip).

I have a timber rail bit l need the wire balastrades ..

Looking for an experienced carpenter/handyman to remove and replace old rotted TP decking slats. Scope of works: * Remove existing rotten TP decking boards/slats * Dispose of old material * Install new TP decking boards * Remove existing rails where required and reinstall once decking is complete * Ensure decking is level, secure and neatly finished All materials supplied: * TP decking boards * Screws and fixings Estimated total area: * Approx. 48m² Please provide: * Your offer per square metre * Relevant experience/photos of similar work * Estimated timeframe to complete works Site access is available and happy to answer any questions.

New Tallow wood front deck to be sanded and oiled. Existing rear deck to be sanded and oiled.. They will be pre washed ready for Tradesperson to sand and apply natural oil.. Oil will be provided.

Merbau 2500 x 1500 size deck. 1000mm high over a concrete slab. 5400mm long Timber wire balustrade. Easy location to build around. Dont need to allow for staining

I have a timber deck, some boards need to be replaced or repaired. At least five boards identified, may be more required. I just want them repaired or replaced

1. Remove and replace a small section of rotted pool decking boards as shown in Photo 1. Require new decking boards and new screws. 2, Realign the loose deck board/plank and repair or replace the screws shown in Photo 2. Materials are not provided. Please include materials in the quote.

Looking for a carpenter to replace a few sections of my timber decking in backyard. A few boards have popped up and need to be re-secured or replaced. I don’t have spare boards.

Re-stain timber deck. Stained 2 years s ago. Beginning to badly deteriorate

I have a pine timber deck about 3m x 3.2m which needs sanding back so that I can stain it. I tried to Gerni off mould and now it’s patchy ☹️

I have a bit of a neglected decking area of my garden that needs to be sanded and stained. The pictures show the main total area. Located in Abbotsford

Need to replace the old pool deck and garden deck using composite decking(Eko deck) 1. Replace the old deck board and frame , put new joists, etc around the pool area for 68 square meters . Low deck area (about 2/3 of 68 square meters) should use H4 water damage free timber for the frame. 2. Pool deck extension for 21 square meters, 1 meter pole need to be added since extension sit on a lower level. Put cladding on the side for 9 square meters to hide the supporting poles. 3. Replace the decking board and repair the frame if necessary in the garden area for 23 square meters . 4. Adding stairs :6 -8steps in total Please provide the quote using AUD per square meter and total price for each job item when quoting. (Ignore the number I input. we decide based on the unit price and your experience ) You must be experienced in installation of composite decking , using breaker and clippers etc to align the deck and minimise the expansion due to the temperature change. Thanks

I need a handyman to pressure wash clean a wooden deck (4m x 2.5m), apply two coats of decking oil (sikken brand)

Timber deck at the patio worn out. Fixing needed.

We have a small Blackbutt timber courtyard deck that needs to be replaced, it’s 3.5m x 3.5m (13sqm) and nailed to a treated pine frame. When first installed we had the area ground levelled compacted, plastic sheets were placed over the ground and a treated pine frame was built before the Bluckbutt timber was nailed on top. The first job was very well finished by a friend. In the last photo you can see there is a small section where a hatch can be lifted to access a sump drain below. We would like both the Bluckbutt timber and the treated pine frame to be replaced. We are replacing exactly as it currently is (Same dimensions, Same timber). We are interested in quotes for installation only.

I can buy the timber laminate wood from bunnings and want to get it installed

DEMOLITION Of GARDEN DECK & CABANA Hi, demolition of deck and cabana being requested. Any rubbish arises from the demolition needs to be removed from the site as well. Deck that needs removal is approx. 25 sqm and cabana as well. Once removed, group would need to remain as just flat earth (soil) Photos shows deck and cabana that needs removal and ones highlighted in blue are the ones that needs demolition/removal. Thank you

We are wanting to build a cat enclosure on our small deck leading out of the back of the house. The cats are very good escape artists so needs to be top to bottom completely secure with a strong mesh wire, preferably with a gate to be able to go into the garden as we also have dogs. Keen to use the whole deck space so the mesh can cover the whole way around - Due date: Flexible

Help to install timber handrail to metal deck fence. 2 man job or one person who’s prepared to work with us to finish. If this can be completed by Sunday, I can offer a bonus payment. - Due date: Before Monday, 22 August 2022