Find experienced deck builders near you

Looking for an experienced decking installer to supply labour only for a small outdoor patio in Bellevue Hill. • Area: ~30sqm composite decking • Materials: Already sourced (white composite decking boards) • Scope: • Build subframe (likely on existing pebblecrete surface) • Install decking boards (including cuts around angles) • Advise on and install appropriate fixing system (clips etc.) • Clean, professional finish with neat edges (picture frame preferred) Site details: • Ground floor patio • Easy access • Irregular shape (refer to plan – not a simple rectangle) Requirements: • Prior experience with composite decking (WPC) • Own tools • Ability to advise on subframe design and spacing • Attention to detail – this is a visible entertaining area Timing: • Flexible, but ideally within the next 1–2 weeks Optional (please specify): • Supply of subframe materials (timber/aluminium) • Supply of clips/fasteners Please include: • Photos of previous decking work • Rough estimate or day rate • Availability Happy to be reasonable with pricing. Please provide your quote.

After composite decking for rectangular 28m2

We’re looking to install a composite deck in our backyard. We will be supplying all the materials and would like to request a quote for the installation. We haven’t done this before, so we’re looking for someone with experience in this type of work. We’re happy to provide more details if you get in touch with us. The attached is an AI-generated image which we’re hoping to achieve.

Experienced deck builder required for a 6m² composite deck in Fitzgibbon. Scope: • Supply and install subframe and composite decking • Low-level deck, no stairs • Site is level with good access I’m a landscaper, so I’m only looking for someone who takes pride in their work and delivers a clean, professional finish. Requirements: • Proven decking experience (composite preferred) • Photos of previous work • Clear breakdown of what’s included • Reliable availability to complete in the time frame

Deck Construction – Gledswood Hills • Looking for an experienced contractor to build a composite deck in Gledswood Hills Project Details: • Size: Approximately 25m² • Shape: Rectangular • Material: Composite decking (Ecodek) Scope of Work: • Dig all required footings and prepare the ground • Excavate and level/scrape the area as needed • Construct subframe in accordance with Australian Standards (correct spans and structure) • Supply and install decking boards • Install breaker boards and complete all finishing neatly • Clean and clear the deck/site upon completion Additional Works: • Excavate areas to approximately 200mm depth and remove soil • Install deck lighting with waterproof cabling • Supply and install transformer

Composite decking supply and install

I have a broken composite decking panel that either need replacing or additional support underneath.

I want to get composite for my alfresco. PleasE share the quote for an area of 4.1m*5.2m which is approximately 22 sqm. I'm looking for labour only, I'lI will get the required material. Thanks!

We will supply required material, need someone with experience in deck building for the back

need someone to help build decking. 2.5x4.5 will supply all metarial. you just need to bring your tool and finish it. can give you hand if required

I had some composite decking done a few years back and this gap wasn’t filled. I need someone to fill it - I have the spare decking pieces.

Hi Im Looking for a qualified trade to supply and install Composite decking to a large decking area at the back of the home. The decking boards will be Moodwood. still to confirm the range. if you can contact us and we can send details though

Composite decking installation Wooden structure ready, just need someone who is experienced in Composite decking installation. Size : 2500 x 4400 mm We got all materials Composite Decking, clips, screws, packers etc in hand, just looking labour work for installation.

Looking for an experienced handyman or carpenter to demolish an existing small timber landing and staircase and build a new composite deck in my backyard. : Deck size: approx 10.5m × 2.7m Deck height: approx 300mm from ground : I will supply the composite decking boards and clips. Installer to supply treated pine framing materials, tools, and labour. : 💡💡Scope of work : 📍Demolition & Preparation - Remove existing timber landing and staircase - Remove small trees/obstructions in work area - Dispose of demolition materials and waste (including tip fees) - Prepare ground for deck construction : 📍Deck Construction - Install deck supports (posts or pavers depending on method) - Build treated pine subframe suitable for composite decking - Install composite decking boards (supplied) - Ensure deck is straight, level and structurally sound : 📍Steps - Build steps from kitchen sliding door down to deck - Build one long step along deck edge leading to garden : 📍Clean up - Remove all construction waste and leave site tidy. : 📝Notes - Composite decking materials supplied by owner - Installer to provide framing materials and tools : 🌆Please include in your offer: - Brief description of your decking experience - Estimated time to complete the job - Photos of similar work if available

Experienced Carpenter Needed to Assist with Composite Deck Installation Looking for an experienced carpenter or decking installer to help build a composite deck at a residential property in Oakleigh East VIC. I will assist with labour but need someone experienced to guide the installation, bring tools and handle most heavy lifting. PROJECT Rear deck approx 37 m² Front deck approx 7.5 m² Total approx 44–45 m² Raised platform about 300 mm high with one step down. Composite decking boards with straight runs (no picture frame border). Likely freestanding frame over existing hard / soft surface. SCOPE • Build and set out timber subframe • Ensure frame is square and level • Install composite decking boards with clip system • Assist with step framing and finishing TOOLS Please bring standard carpentry tools (drop saw, circular saw, drill/impact driver, level/laser). MATERIALS I am sourcing boards but happy to purchase through you if you can get better trade pricing. TIMING Approx 2–3 days work. Please respond only if you have installed several composite decks before. Include experience, photos of previous decks and your day rate.

I would like to get the alfresco area done . Would like to get a quote for tiling and composite decking . Not decided which one to go for yet . It’s a concreted area /exposed aggregate. Measurements- 6.660 meter length and 3.760 meters wide

Wanting to get a quote done for a small deck approx 1800mm x 1200mm x 250mm will to hide a sewer access hatch in back yard, wanting it made out of composite same or similar colour to match the fencing, cheers

Roughly 15-20 m2 out door area of new built. Wanting composite decking done. The asked price is not actual. Will negotiate and come to agreement upon discussion. The dirt in photos will be removed and the ground will be graded. Looking for someone to install the frame and composite decking.

L shape composite decking to be done Materials on site already Roughly 1.5mtrs X 5 and 6.5x 3.5 Quote needed

Looking for an experienced tradesperson or small team to complete the installation of composite decking for a residential property and provide a quote. Deck Size: 65m^2 Timeline: Ideally to be completed within few weeks Requirement: -Proven experience with composite decking -Must have own tools and insurance -Ability to provide photos or references of previous work

Chainsaw a pile of old timber deck into pieces to fit into fireplace. And then stack the wood.

Details: need a handyman/builder that is confident and professional in their trade. The job entails installing joists, splicing in posts, non load bearing. Laying 1.2m deck boards. Installing handrail and paint. There are other jobs on site that also need completion. Only looking for people that are reliable and work unsupervised in an over 50’s park. Opposite Bunnings for easy materials access. I can organise materials for the days work. ABN holders preferred.will negotiate hourly rate in site.

Approx 45 sqm of timber decking We are needing someone to clean and oil. Please only apply if qualified and know what you’re doing Photos of some of the decking attached

Hi, I'm looking for an handyperson or carpenter to replace approximately 5 damaged deck boards on my outdoor timber deck. *What needs doing:* * Remove and replace 5 rotting/splintering deck boards * Source matching timber decking boards * Re-fix boards securely with screws * Ensure the repaired section is flush and safe to walk on *Please have a look at the attached photos before quoting. Please include your quote and any questions in your offer. Thank you

6 metres by 1200 treated pine deck to go in front of a caravan and a annex only coming up about 300 mil off the ground

I am looking for a Tasker to sand back my outdoor deck and one IKEA storage bench to raw timber. Core Task (Sanding): - Deck Area: ~12sqm (3x4m) plus the vertical front fascia board. - Bench: 1x IKEA ÄPPLARÖ storage bench. - Condition: Weathered hardwood. No rot. Nails/screws are flush. - Requirement: Bring your own professional sanding equipment and detail sander for edges/corners. Optional Extra (Please quote separately): - I have the stain ready. If you are interested, please provide an additional price to apply 2 coats of stain to the deck and bench once sanded. - If the staining price is too high, I am happy to do this part myself, so please keep the quotes distinct. Access: Outdoor power available (need to run lead through a window so bring 10m+ lead). Flexible timing.

Demolish timber deck support structure, save timber for my reuse and remove old steel support from an old above ground pool

A 4mx4m timber deck on/over a 2mx2m concrete water tank using 150x30mm Merbau planks fixed with SS decking screws on Cyprus or concrete stumps, treated pine bearers & Joists. I’m happy to contribute my labour to digging stump holes, laying decking etc

Replace broken timber support slats in this area of decking. Top slats are still fine and ready to be placed back on top.

Timber decking requiring surface preparation and staining or oiling. Approximately 32 m².

Clean and repaint timber deck 3x5m

We have an existing outdoor timber deck that requires targeted repairs, followed by a sand and varnish. Scope of work Replace several damaged deck boards Replace sections of rotted/compromised substructure (joists/bearers) underneath. Sand deck and apply appropriate exterior grade varnish Ensure deck is structurally sound, level, and safe Experienced carpenter or deck specialist Comfortable assessing substructure issues and recommending fixes.

Hi there! I have an existing timber decking to a balcony that is located about 100mm above an existing concrete slab. Leaves are gathering in the gap below the timber decking and I would like an number of access hatches or similar places in the decking to clean out the leaves. Timber decking is existing and is to be reused. Hinges and handles are to be provided by you. You will see in the photos I have partially removed the decking. Access is via a long driveway that a large van can access. Then there is steps up about 3 floors. The job can be done in January. There are 2 seperate decking areas that are a similar size. The photos show one area.

I’m looking for someone to build a low timber deck using mod wood over an undercover existing decorative pebble section in my patio. Looking for colour similar to Stockman Brown, and finish as per photo. Please send me a photo of your past deck installation. The area is out of the sun, and has water and power. Area details is L shaped: • Main section: 2000 mm (W) × 2500 mm (L) • Additional strip along the wall: 450 mm (W) × 2000 mm (L) • Total area: roughly 6.0 m² • Ground surface: loose white stones (shown in photos) • The deck should sit level with the adjacent tiled floor. What I need: • Supply and installation of a stable timber frame suitable for outdoor use, and composite decking material.

Details: Deck Size: 6.5m x 4.5m Condition: Mostly in good shape, just needs a fresh coat to restore colour and protect the wood

1) Clean down to prepare including sweep and hose off - will need to dry so may require split over days before oiling 2( Oil timber deck (oil provided)!

Timber decked entry walkway needs staining and sprucing up and retaining walls need painting

I have a 5 year old deck in an internal courtyard / garden areas that needs a refresh in the lead up to summer. The deck is approx 40sqm hardwood. Scope is: - clean and prep surface - light sanding - minor board repair and replacement (couple of minor spits / cracks that are a hazard for small feet) - re-seal with 2-3 coats of oil - previously used Intergrain UltraDeck which I could supply if preferred Located in Stanmore Optional scope: - small section of timber on the internal wall - light sand teak furniture to natural finish

Need someone to oil (using Cabot’s Aquadeck) my timber deck and back stairs. Includes hand rails and deck posts. Pressure hose first in a few dark areas of deck would help (see deck photo). 2 coats required. Quick dry and water based. Aquadeck and applicator etc supplied.

Looking for someone with experience and expertise in staining timber and painting to: 1. Stain a new 6m X 4m timber deck in our backyard made of treated pine (refer to image) to preserve the timber and keep it looking fresh, including supplying the stain (I'll pick something from Bunnings), prepare the surface and stain the timber with a brush and applicator. 2. Paint the white timber post and small section of the roof circled in red in the photo, including supply the paint (I'll choose something from Bunnings), sanding down the timber and 2x coats of paint.

Circa 30m2 decking required, budget options would be preferred but discussed. Concrete will be removed

- stain 4m x 3m garden decking (blackbutt decking) including a sealer plus an additional 3 coats - stain the eaves and timber front door standard size (hardwood - Vic Ash) - stain timber on back door (standard size). See photos for all. Please include all materials. Timber stain to use is Intergrain UltraDeck Timber Oil.

My name is Connie, I am looking to get a quote for someone to help oil this deck for me. I am ideally looking for someone who has done this before (I've left it out of repair!) and can give me some tips on looking after a deck xD. If available during a weekday that would be great. The decking oil will be provided and I am not sure what else would be needed, if you have a sander or other equipment, that really helps. Not sure what type of price range this would be, in the Algester area, South side of Brisbane

I have a bit of a neglected decking area of my garden that needs to be sanded and stained. The pictures show the main total area. Located in Abbotsford

Hi Need a quote for timber deck for length 10ft width 3 ft . Approximately. Very simple, material shall be provided.

Small garden deck extension.

I’m looking for an experienced carpenter to build a low rise garden deck off an existing hardstand, with a small extension into the grass area. 📐 Size: approx. 4m x 7.5m 📏 Height: only ~300mm above current hardstand level I’m open to using composite decking materials (such as Woodevo) or a hardwood timber like spotted gum that will naturally grey and remain low maintenance over time. 🔨 What I’m looking for: • Proven experience building similar low-rise decks • Knowledge of both timber and composite decking materials • Quality workmanship and attention to detail 💬 Note: No pricing required at this stage — you’re welcome to visit my home before confirming a price. If you’ve completed similar projects, please share photos and references in your response.

Need to replace the old pool deck and garden deck using composite decking(Eko deck) 1. Replace the old deck board and frame , put new joists, etc around the pool area for 68 square meters . Low deck area (about 2/3 of 68 square meters) should use H4 water damage free timber for the frame. 2. Pool deck extension for 21 square meters, 1 meter pole need to be added since extension sit on a lower level. Put cladding on the side for 9 square meters to hide the supporting poles. 3. Replace the decking board and repair the frame if necessary in the garden area for 23 square meters . 4. Adding stairs :6 -8steps in total Please provide the quote using AUD per square meter and total price for each job item when quoting. (Ignore the number I input. we decide based on the unit price and your experience ) You must be experienced in installation of composite decking , using breaker and clippers etc to align the deck and minimise the expansion due to the temperature change. Thanks

I need a handyman to pressure wash clean a wooden deck (4m x 2.5m), apply two coats of decking oil (sikken brand)

Timber deck at the patio worn out. Fixing needed.

We have a small Blackbutt timber courtyard deck that needs to be replaced, it’s 3.5m x 3.5m (13sqm) and nailed to a treated pine frame. When first installed we had the area ground levelled compacted, plastic sheets were placed over the ground and a treated pine frame was built before the Bluckbutt timber was nailed on top. The first job was very well finished by a friend. In the last photo you can see there is a small section where a hatch can be lifted to access a sump drain below. We would like both the Bluckbutt timber and the treated pine frame to be replaced. We are replacing exactly as it currently is (Same dimensions, Same timber). We are interested in quotes for installation only.

I need you to install a timber deck, approximately 3m X 5m. I need you to install a garden shed approx 3m X 3m on that deck.

Looking to get quotes for a deck built in garden.approximately 3m by 7m

I can buy the timber laminate wood from bunnings and want to get it installed

DEMOLITION Of GARDEN DECK & CABANA Hi, demolition of deck and cabana being requested. Any rubbish arises from the demolition needs to be removed from the site as well. Deck that needs removal is approx. 25 sqm and cabana as well. Once removed, group would need to remain as just flat earth (soil) Photos shows deck and cabana that needs removal and ones highlighted in blue are the ones that needs demolition/removal. Thank you

We are wanting to build a cat enclosure on our small deck leading out of the back of the house. The cats are very good escape artists so needs to be top to bottom completely secure with a strong mesh wire, preferably with a gate to be able to go into the garden as we also have dogs. Keen to use the whole deck space so the mesh can cover the whole way around - Due date: Flexible

Need a carpenter to restore garden decking - garden seat with planter box - uneven garden deck Happy to discuss further on the job and scope to refine the quotation Due date: Needs to be done by late June

Old decking and joists underneath decking needs to be removed. I can dispose of it all so just need it chopped to approximately 40cm lengths. Beams (joists) also need to be chopped to the same length. Does not need unscrewing so should be pretty straightforward. - Due date: Needs to be done as soon as possible.

Looking to have a new deck built in our garden. Photos attached of area, measurements are 6x3 - 18m2 and the area wrapping round the out building is 4x3 - 12m2, 30m2 in total. Please quote on materials as well as well as install and labour costs. We were thinking of using composite decking due to the low maintenance, but willing to take advice on what would be best for us.

Help to install timber handrail to metal deck fence. 2 man job or one person who’s prepared to work with us to finish. If this can be completed by Sunday, I can offer a bonus payment. - Due date: Before Monday, 22 August 2022