Find experienced railing contractors near you

I need about 5.9 lineal metres of s/s wire balustrade installed/fitted. I can supply all the materials. To be fixed into steel RHS posts. 1 @ 3.5 wide and 1 @ 2.4m width. x 900 high. Would need to have experience with this system preferably.

Have an old deck that is lacking balustrade wire. Wanting wire installed right around deck to bring it up to standard 80-100mm apart but mainly to keep dog on deck from jumping down into backyard. At moment using temporary mesh wire. Thinking 8 wires evenly spaced. Exact measurements in photo

1.2m high pool fence for swim spa roughly 8m by 4m with gate. Fence to run along edge of slab and then gate near opening close to fence. Timber deck inside the gated area that steps up toward the corner / spa end of swim spa for entry.

Supply & install galvanised steel welded dog mesh (rigid not rolls), preferably black or brown, openings 50mm x 50mm, wire diameter 3-4mm. Attach to existing metal balustrade fence to prevent dog escape. Length approx 12m, height 1.0-1.1m from top of concrete at base to top of horizontal fence top.

The balustrade is bent. Needs the following: 1) Relocate the post highlighted by the yellow circle to the right, where the location is shown in red line markup (concrete damaged from bolts and easiest to move to the right and fix to solid concrete). 2) Replace the length of the steel post, which is bent and highlighted in orange (length less than 2m) 3) Refix the middle post base shown circled in blue highlighter. The two base plates may also need to be bent back to make them flat again.

property is an apartment block; balustrade fence smashed during storm, needs relacing

Install aluminium balustrade inc. collection from Bunnings We need someone to collect and install an aluminium balustrade. Materials purchased by us upfront — you will not be out of pocket at any point. What you need to do: - Collect ProtectorAl aluminium fencing components from Bunnings (we will purchase and arrange) - Install on site: 2800mm straight run + 1000mm return at 90°, mounted to top of masonry wall (approx measurements). - 4 flanged posts dynabolted to masonry, 3 panel sections (2 panels cut to size between pickets) Tools required: hammer drill + 10mm masonry bit, angle grinder or hacksaw for cutting aluminium, level, basic hand tools. Materials: Purchased by us upfront Please check the photos before quoting.

Existing fence on top of retaining wall never finished by previous owner, want to replace with wire version. Fence is around 6.5m -7m long including posts , and about 900mm high Have all wire materials , may need one more post, good to go otherwise I think

We’re installing a front yard balustrade and gate and need a steel post installed to support and stabilise the structure. Scope: - Supply and install 1 x steel post - Post size: 100mm x 100mm (dressed smooth) - Install depth: 400–500mm below ground level (concreted in) - Finished height: 1500mm above ground level - Ensure post is level, plumb, and suitable for fixing a balustrade/gate to Notes: - Task includes sourcing materials (post + concrete) - Easy access to the install location

We need a concrete balustrade demolished and removed. Approx. 6m long and 0.9m high. We need a timber paling fence removed including posts and rails. Approx. 19m long.

Split level backyard requiring a balustrade with a gate 3m long Attaching it to a brick wall and gate will be attached to a pergola post aluminium and one post will have to be set in concrete to hold the gate. Also attaching the lockable gate latch to be fitted. All products will be supplied and the concrete and screws supplied

Need some prices to supply and install aluminium balustrades for w balconies. Both balconies are approximately: 2000 x 800

Hi I would like to get frameless glass balustrades installed. I would like a gate installed as well. The area is 23.5m and it’s almost a straight fence/line. I am happy to get the glass balustrades from Bunnings or if you can do a similar price, do let me know. I need this job done asap. I would only like professionals/ experienced trades to contact. The last two photos are of a similar job done at another property. Thank you

I need a Aluminium Balustrade with gate in patio

Need someone to repair or replace our current balcony balustrades. This will be for a supply and fit. Currently made of wood, but happy to consider replacing with pool type fencing/ standard off the shelf fencing. Feel free to swing by the property to be able provide an accurate quote.

I need someone to supply and install a wire balustrade on an indoor staircase, including vertical posts and top rail. Straight staircase approximately 5m long.

Quote to Replace an existing aluminum pool fence with frameless glass. Considering Bunnings/stratco options. Job is located in Busselton/ Chapman Hill Target install - before Xmas

Manufacture and install aluminium balustrades for rear balcony Approximate measurements are 13.2 m Welded Aluminium Balustrades Powder coated - 3 x (2260 x 90mm) straight Sections - 2 x (570mm x 900mm) straight Section - 2 x (2620 x 900) stairs section All work to meet Australian Standards (AS/NZS 1170.0, AS/NZS 1170.1 and NCC2019)

Supply and installation of Balustrade Fencing or Handrail for the Garage Stairs.

Supply and install new glass balustrade and 1 off gate for pool. Approx 30 lineal metres. Allow to remove existing metal fence. Cost per lineal metre for both frameless and semi framed options