Find professional picket fencing services near you

build a picket fence at the front of my house

Take down horse fence & load it in trailer. Along with some gates

The job requires: Removal of existing small wall footing (existing brick wall already removed Concreting in 9 x 1.2m high posts, installation of picket fence Design and materials to be provided

Need PVC picket fencing installation. Already bought picket fencing with post. Send your offers. Need installation. Each 2.4 mtr wide x 1.2mtr height Approx 24mtr on left side and 8mtr on the right side. 1 small gate. Flexible days.

I have a picket fence on the front of the house (see photos). It is 2-3 metres wide with caping. See pictures. The fence is rotten in some parts and falling apart. There is a gate on each side, the gates do not need replacing, just the fence between the 2 brick pillars. I have also attached a photo of the neighbours fence - see photo of fence in good condition (my house is a semi, attached to the neighbours, we have the same fence style - matching). I'd like it built to the same style and quality (with capping). No need to paint, I will get a painter to paint in the 2 tone style once the job is done. Just need the current fence removed and taken away and replacement built.

Job description I’m looking for someone to supply and install a white timber picket-style pedestrian gate for the side entry of my house in North Bondi. I have attached photos showing: * Photo 1: the style of gate I would like — simple white timber picket gate between brick pillars. * Photo 2: the existing entryway where the new gate will be installed. Scope of work: * Supply and install a new white timber picket gate, matching the style shown in Photo 1. * Approximate opening dimensions: 85 cm wide × 110 cm high. * Please confirm measurements on site before fabrication. * Childproof/baby-safe latch or lock, similar to the one shown in the reference photo. It should be difficult for a small child to open but easy for an adult to operate. * Include suitable hinges, latch/lock and all hardware. * Gate should be sturdy, weather-resistant and painted (I will provide the paint) * Ensure the gate is properly aligned and securely fitted between the existing structures. Location: North Bondi, NSW Parking: Private driveway available for parking. Please message me through Airtasker — no phone calls please as it is hard with my work hours. Please include in your offer: 1. Total price for supply + installation 2. Approximate timeframe 3. Photos/examples of similar gates you have installed 4. Confirmation that the price includes the childproof/baby-safe latch. Thanks

Wanting someone to help with constructing framework for a picket fence on an intown property. Approximately 21m in length. Can supply materials.

Looking for an experienced fencing contractor or carpenter to supply and install a custom double swing gate for backyard access in Box Hill, VIC. Please refer to the attached design and site photos. Specifications: * Total opening: 3,470mm (existing fence to house wall) * Height: Approx. 1,800mm * Gate widths: Approx. 1,750mm left + 1,680mm right, subject to site measurements * Style: Traditional pointed-top timber pickets, matching my existing front fence * Frame: Galvanised steel frame with suitable bracing to prevent sagging * Posts: Preferably timber, concealed behind the gate (not visible from the front) * Hinges: Heavy-duty adjustable hinges * Lock: Outdoor mechanical keypad gate lock (supplied by me; installation required) * Hardware: Include suitable drop bolts and other necessary fittings Key Requirements: 1. Gate must extend from the existing timber fence to the house wall, NOT the carport posts. 2. Supporting posts must be concealed behind the gate to maximise usable opening width. 3. Both gates must open fully to allow large furniture and equipment through. 4. Structure must be reinforced to minimise long-term sagging. 5. Posts must be securely installed without relying solely on the existing fence or weatherboard cladding. Quotation: Please provide two prices: Option 1 – Without Painting: Complete supply and installation, including posts, frames, timber pickets, hinges, hardware and lock installation. Option 2 – With Painting: Additional cost for preparation, priming and painting to match the existing house weatherboard colour. Please confirm your proposed materials, experience with similar gates, availability and estimated installation timeframe. Site inspection welcome before finalising the quote. Location: Box Hill VIC 3128.

There are 4 different issues: 1. Picket fence not connected to upright post 2. Rear boundary fence falling over (base of uprights likely rotten) 3. Double gate in picket fence to be rehung with new hinges 4. Side boundary fence leaning We would like the fences fixed and where possible standing upright and reinforced

White picket fence across front of property and small side. Fence type : colonial or gothic 1.2m high Fence across : 15.4m Fence side: 7.7m Preferably with a gate ( walkthrough not driveway)

Need fence replaced. And gate. Run is 6m

Hi. We would like help to build a mid-height picket fence across two narrow sections of our yard to effectively section our backyard from the front and to check and tie down any loose sections of our farm wire fence which divides our property from our neighbour (about 15 m long)

I am looking for a reliable and genuine fencer to install 16 metres of wood picket fencing, Heights 1.2 metre. 3-metre double swing gate and a 1-metre single gate. Preparation and old fence removing. Please contact me with your quote and availability. Thank you.

I have PVc picket fence need installed in my backyard . It doesn’t need screws just posts in ground . I will provide all materials and tools required. Including Auger .

I’m building a duplex on Ramsay Rd in Five Dock. We’re thinking a masonry and picket fence. We’d like the highest possible fence and hoping to avoid going through council. We need two gates, one for each driveway. The block is 15 metres wide. The image in the task is from before the house was knocked down.

Need new picket fence on the boundary. Approximately 7.5 meters. Preferably PVC

Supply and install a post, gate and hardware for a white (scalloped) timber picket fence Gate: 1160mm x 940mm wide Post 1200mm above ground level Including supply of paint and painting

I want to build a white picket fence in the front yard. I want to do some of the work but need someone experienced with fences to lead. I will supply all materials but you should have your own appropriate tools and workwear including steel capped boots etc. Open to negotiate.

Repair / Replace Timber Picket Fence – Approx. 8 Posts Description: Looking for an experienced fencing contractor or carpenter to repair an existing timber picket fence. The fence has leaning sections due to failed timber posts. The job will involve: * Remove and replace approximately 8 timber fence posts * Reinstall the existing fence where possible * Reuse existing pickets and rails wherever they are still in good condition * Replace any damaged rails only if required * Ensure the fence is straight, level and securely concreted into the ground * Dispose of any damaged materials (or stack neatly on site if preferred) The fence is approximately 15–20 metres long (please adjust if needed). I’m looking for someone who has done similar fencing work before. Please provide: * Your quote (labour + materials) * Estimated timeframe “Open to quotes. Preference is to repair the existing fence by replacing the posts and reusing as much of the existing timber as possible rather than replacing the entire fence.” I’ve attached photos of the existing fence for reference.