Find professional picket fencing services in VIC

White 1m picket fence for corner block (roughly 43m) Materials to be supplied and fitted. Photo with fence is what was already there and needs to be similar.

Timber, cement and gate ( plus latch )supplied. Total length of fence only 4m x 1800cm height. Must show experience of fence work or handyman skills.

We are looking for a picket (or similar) fence approx 7m x 1m high with a gate installed at the side of our house.

We have a long wooden picket fence and would like someone to add an approx 1m wide wooden pedestrian gate with hinges and key lock

I need a new picket fence and gate in Richmond. Just under 8m in length. Will include removal of current fence

Looking for quotes for a picket fence In Sandringham

Hi, we need to build a 7-9M length ,90 cm height white pvc fence with a small entrance gate. Example in second picture

Looking for experienced fencing installer to build small front picket fence (approx 1m high) approx ~10m in length total, to surround front porch/garden area of my unit. Includes: – Timber picket fence (front + side return) – 2x custom gates – Posts concreted properly – Clean alignment with existing path – Supply + install Looking for quality finish, not cheapest option. Budget is a guide — open to quotes based on quality and materials. Photos of area on request Have additional work available also.

Looking for an experienced handyman / fencing contractor to repair a damaged section of front timber picket fence. A vehicle has hit the fence causing structural damage.

We need a mesh star picket fence built to divide our yard into two to create a safe area for chickens and ducks so our dogs don't terrorise them. It will be on a slope so care needs to be taken that there's no gaps underneath for our little dogs to get through. Length is approx 35 metres. We need a gate for access to mow the lawn with our ride on.

Work required: • Straighten leaning fence posts (multiple, potentially all posts are out of alignment) • Replace the bottom horizontal board/rail along the fence line • Replace a handful of damaged/broken pickets The fence runs along the front of the property.

I have a wood picket fence, I have removed the existing pickets and need them re attached with a fixing gun. They need to be less than 48mm apart to be compliant. Need someone with fixing gun to re attach the pickets. I have all the materials ready. I will be there to assist

Need picket fence put up and door installation

Have picket s may need few more need installed

Picket fence gate has ‘slipped’ so it now hangs lower than the latch point. It’s not just the hinges but the structure of the gate that is in need of repair. The return spring to be replaced There are also 2 fence post finials that are loose to be repaired.

Rotten and broken fence picket x 1 needs repainting and replacing

Money is for making cotact. No actual work reqired.. Need a timber picket fence installer. Preffered who know to drive forklift, and fabricate driveway gates. Can dress, shape, edge wooden posts (see post styles in photo). Run picketmachine We have a metal fabrication workshop. Looking for full time subcontracter Rate $45 + GST+ $5 into super. Essentially rate of $50 per hour ($45+$5) Role will be fence installation, working in the yard, driving forklift.

I am attaching some pickets to an old steel gate. I have neither the time, patience or skill to get it right I do have is the pickets, self tapping screws washers for someone else to complete the job for me. It should be pretty straightforward for someone that can confidently drill pilot holes and accurately lineup the pickets across both gates

We have a picket fence which is missing 1 picket and has some rotting cross pieces that needs repairing. The gate also needs repair as it doesn’t shut properly. The decorative knobs on the fence are rotted and also need replacing. I want repair only, not an entirely new fence

Handyman needed - extremely easy task required. Nail 2x existing pickets back on to front fence.