Find a local glass fencing contractor in VIC

We want the black fence removed and a new glass fence installed as per council requirements

I need verified fence 50x10mm blade fence for pool, 5 meters long with pool fence including in the 5 meter long.

Looking for an experienced glass pool fence installer to replace two existing glass panels. Scope of work: - Remove 2 existing glass panels (12mm thick, approx. 1400mm wide) and safely carry them into my garage (approx. 10m). - Carry 2 new 12mm toughened glass panels from my porch to the pool area (approx. 20m). - Install new panels into the existing stainless steel spigots. - Fit and secure 2 supplied RIGI clamps connecting the glass panels to the adjoining fence. New panels: One 1400 × 1800mm rectangular panel and one 1450mm wide transitional panel (1800mm down to 1200mm). All glass and hardware supplied. Existing spigots remain in place. No drilling or new posts required. Important: Panels are very heavy (approx. 70–80kg each). Must have experience installing glass pool fencing, suitable lifting equipment and sufficient help to safely handle the panels. Easy access to pool area. Please advise your experience and whether you're insured for accidental damage to customer-supplied glass.

The glass fence panels of my pool area are set on my decking. Over time, probably because of weight and weather/wind, the panels started to lean inwards the pool area as decking seems to be caving in. I had someone making minor adjustments to the decking a while ago but those are no longer reliable. I do think that the panels need to be reinstalled and, potentially, decking wood where the panels sit on top of might need to be replaced. So task is replace one of the decking planks and reinstall glass fence panels.

I need a pool fence glass designed and constructed around the spa. There will be Rio going up on the posts around the back and side, which will have a plants growing on it eventually. Space is 5m x 4m. Looking for quotes. Installation asap

Need someone to install glass fence on a 10 mts in a straight line. I’ll provide the fence and other stuff

Fixing the glass pool fence as close as possible to the original one.

Re - hang pool fence to be compliant with pool regulations. Fence attached to powder coated posts and fill in drill holes

Looking for metal balustrades and handrails as shown in the attached picture. I’m after the basic version to comply with the building regulations. If you are a carpenter, I’m open to “post and wire” balustrades. In that case, please quote for labour only; I’ll supply the materials.

Pool fence safety barrier 16m straight line, glass panels

A tubular gate and glass gate need to be adjusted to close safely in accordance with council pool compliance regulations. Must be experienced with Victorian pool safety compliance and ensure both gates self-close and self-latch from all positions.

Looking for quotes for supply and installing a 12 m to 15 m glass pool fence that is complaint, around our spa. See picture. Need it built asap. Flexible with weekday availability. Based in Point Cook. Looking for competitive quotes.

My pool gate door doesn’t close anymore. Could be the hinges. Was working fine a couple months ago. Need repaired

I need a glass pool fence installed around a 2.3sq SPA. The install will need to include the supply of all materials (glass panels with glass gate and spigots, panel clamps for support). I want someone who specialises in glass pool fences. Roughly 13 linear meters of glass, including a gate. The fence will be fixed onto decking that is onto of a concrete slab. The glass is to go around the pergola pillars. The decking will be done by a landscaper once the spa is delivered (End September to early October). The permit has been applied for and is being organised by the spa company.

We need a metal fence and gate at the end of deck area in the picture to seperate that area. The length is 3m

Job Description: I am seeking an experienced glazier or pool fence installer to replace a CRL in-floor hydraulic door closer on a frameless glass pool gate in Essendon. The new CRL closer has already been purchased and is a direct replacement for the existing unit. Scope of works: Remove existing CRL floor-mounted hydraulic closer. Install new CRL closer. Rehang and align frameless glass gate as required. Adjust closing and latching speeds. Ensure the gate self-closes and self-latches correctly for pool fence compliance. Requirements: Experience working with frameless glass pool fencing and floor springs/door closers. Suitable tools and knowledge to safely remove and reinstall the glass gate. Ability to provide references or examples of similar work completed. Please provide a quote, availability, and any relevant experience with CRL floor closers or frameless glass pool gates.

Pool Fence Installation – Labour Only – Edithvale Looking for an experienced fencer, carpenter or skilled handyman to install our new timber pool fence in Edithvale. We supply all fencing materials. We are seeking a fixed quote for the complete installation/labour, not an hourly rate. Fence details: * Approx. 27.8m total pool fencing * 13 × 2000mm W × 1200mm H panels * Panels: 40 × 30mm Spotted Gum vertical battens, approx. 77mm spacing, with tubing through battens for rigidity * 2 × 918mm W × 1200mm H gates * 2 × pool gate lock/latch kits * Approx. 18 × Cypress posts – 90 × 90 × 1800mm Scope: Set out fence according to supplied plans, dig post holes, install/level and concrete Cypress posts, fix all panels to posts, install both gates and latch hardware, and ensure everything is straight, secure and operating correctly. The fence is going into garden beds/ground, not an existing concrete slab. Landscaping has not yet been completed, so access is easy, with predominantly sandy soil, making post-hole digging relatively straightforward. We already have the fencing and posts. Once we meet and confirm the amount required, we are happy to purchase and have the concrete/post mix on site. Please see attached images showing the panel design and the recommended method for fixing the panels to the Cypress posts. As this is a pool safety barrier, installation must meet the manufacturer’s requirements and applicable Victorian pool-fencing requirements. Trades must have current public liability insurance, relevant fencing experience and their own tools/equipment. Please quote for the FULL scope of works, including installation of all posts, panels, gates and hardware. Please also include examples/photos of similar work if available.

Fix pool fence gate so that it closes automatically .

Install perforated pool fence. Materials supplied 16m with gate.

Need to install a glass fence on the edge of a concrete patio. I have the glass and the spigots, but if anything else is needed, happy to purchase. 3 glass panels need to be installed, ranging between 120 and 190 cm in length. They are 120cm in height. The base is a concrete slab. Easy access to the installation site.