Find experienced hardwood flooring contractors in VIC

wrped/lifted floorboard to laundry entrance and lifted broken tiles

Floorboards need to be removed. Replaced with tiles in laundry. 1.55 metres long x 1 metre deep. Small space I’ve put $1k but please submit your price as I am willing to pay more

I’m REQUEST FOR QUOTE – FLOOR SANDING & POLISHING Hi, I’m currently seeking a quote for sanding and polishing approximately 108m² of hardwood floorboards. At this stage, I’m after an approximate quote only, as I do not yet have access to the property to arrange a site inspection. I’m happy to answer any questions promptly if needed. Scope of Works: * 3 x Bedrooms * 1 x Hallway * 1 x Lounge room * 1 x Dining room (In the picture I’ve provided you can see the areas marked in green on the floor plan.) Job Details: * Property is vacant * Carpets have already been removed * All staples, tacks, and trims have been cleared * Floors are in great condition * Areas are fully accessible and ready for work Finish Requirements: * High-quality water-based satin finish * Durable, long-lasting product (no low-grade materials) * Clean, professional result with attention to detail * Must be completed using modern equipment and experienced tradespeople.

One of the flooring pieces are broken they need to be removed and replaced before the floors get sanded

Looking for someone to sand our hardwood timber decking and the timber support posts on our covered outdoor area, back to clean bare timber ready for coating. What’s involved: • Deck: approx 50 sqm of hardwood (merbau/spotted gum), weathered and grey in patches — sand back to clean, smooth timber. Photos attached. • Posts: 4 timber support columns under the roofed entertaining area — sand back to match. fence appox 6 sqm

1st floor apartment in Williamstown with hardwood flooring. Has gaps and needs to be filled to reduce draft. Flooring needs to be sanded, polished and finished in a walnut colour. 2x bedroom, lounge room, small hallway and staircase

Sand and clear polish to floorboards as per floor plan attached. Total area highlighted in yellow requires sand and polish. Where I have added some blue lines is the area with wear and scratches the rest of the floor is in good condition. Floors are hardwood. House is empty of furniture and ready for the task.

Sand and varnish (matte) also 1 minor repair (as per photo of a gouge). Engineered hardwood oak matte finish. Hasn't been sanded before. Only a portion of the house 4.5x 3.5m approximately of the kitchen/dining area.

Sanding down hardwood under belcony

We need hardwood floorboards installed in one room. We have the boards and adhesive. You would need to provide underlay if needed. The current flooring is yellowtongue. The room is approximately 4mx4m. Following installation of flooring we need the skirting and archs reinstalled.

2 damaged floor boards need replacing. Hardwood floors

Removal of existing hardwood timber flooring from a designated area and reinstallation in another section of the kitchen where flooring is currently missing/exposed. The work includes: * Careful extraction of timber boards from the selected area without damaging usable pieces * Preparation of the target area (cleaning, leveling if required) * Cutting and fitting the salvaged boards to match the existing floor pattern and direction * Securing boards in place and ensuring alignment with surrounding flooring * Sanding and finishing the patched section to blend with the existing floor as closely as possible Objective: Achieve a seamless and uniform appearance with minimal visible difference between old and relocated flooring.

Hi, looking someone can install floor under the wall heater we just removed. We are in hoppers crossing

Looking for an experienced floor sander to sand and finish some of the hardwood floors in a large house in Sherbrooke (Dandenong Ranges). Details: • Approx 53m² of solid hardwood flooring • Boards are 20mm thick × 82mm wide • Floors are in very good condition – they appear to have been carpeted for most of their life • Some old lacquer and paint overspray that needs sanding off • Nail holes present but nothing unusual Its a really beautiful floor and I am keen to make it right again The goal is to sand back to raw timber and I will apply a natural finish. Sand only is reuired Property access • Easy access • House currently being renovated so space will be clear • Parking on site Looking for: • Someone experienced with dust extraction sanding equipment • Clean professional finish • Happy to discuss best finish for older hardwood floors Please include in your offer: • Your price per m² or total estimate • Whether you supply materials • Photos of previous work if available Happy for someone to come inspect and quote. The rooms are large, clear and easy to work in.

Looking for an experienced floor sander to sand and finish hardwood floors in a large house in Sherbrooke (Dandenong Ranges). Details: • Approx 163m² of solid hardwood flooring • Boards are 20mm thick × 82mm wide • Floors are in very good condition – they appear to have been carpeted for most of their life • Some old lacquer and paint overspray that needs sanding off • Nail holes present but nothing unusual Its a really beautiful floor and I am keen to make it right again The goal is to sand back to raw timber and I will apply a natural finish Property access • Easy access • House currently being renovated so space will be clear • Parking on site Looking for: • Someone experienced with dust extraction sanding equipment • Clean professional finish • Happy to discuss best finish for older hardwood floors Please include in your offer: • Your price per m² or total estimate • Whether you supply materials • Photos of previous work if available Happy for someone to come inspect and quote. It will be easier than usual.

Attached if a picture of water damage

Sand back and restain in a black Japan (or similar) clear coat existing hardwood timber floor for a semi gloss finish. There are three rooms (total of 40m2) - living (4.5x4) - hallway (1.05x10) -study (3.2x3.8) To be completed.

Need 4 pieces of wood nailed One to a brick surface one to a hardwood surface, wood supplied only Should be only 15 minutes work

Water marks from dog water bowl. Shouldn't require sanding as they are new marks. Haven't tried hydrogen peroxide or other solutions as would prefer someone who has done before and not to permanently stain the flooring. Approximately 4 square metres.

Kitchen, dining, foyer hardwood floor sand and varnish.