43 Carpenters in Northcote

Would love to restore my Grandmother’s dresser Could use a sand, vanish or stain, possibly new handle/knobs Would prefer someone who is experienced in this kind of work as it’s sentimental Open to discuss ideas Located in Northcote

Hello folks, I have two engineered bench tops, where it has foam/rubber in the middle and engineered stone around the outside, see [Content Moderated] for information on the bench type. It is not a solid piece, but pieces of stone wrapped to make it look like a bench top that makes it 4cm thick I need one piece cut to 706 x 606 from the original size of 950 x 700. I need a second one cut to the same dimensions ie., 706 x 606 but with a “window” cut out of the middle to make way for a sink to be dropped in from a second piece of bench. I need 2 further pieces cut, one being 364 x 606 and another 195 x 606. According to litestone’s website (the manufacturer) I just need a “diamond blade” circular saw to cut it... Other people recommend wet cutting, which I have never done before. Open to the best method of cutting. More information on installation and cutting can be found here: [Content Moderated] /installation. Thank you.

Have a spotted gun deck approx 30 sq m. Needs cleaning and restaining . Also needs approx 5 boards replaced if you are able to source and supply.

I need someone to find 1 door that either matches the same style and dimensions as in the photo (dimensions below). Or find and hang 2 doors of a similar style. Dimensions: Length - 2040mm Width - 460mm Depth - 35mm Will need to come to my house, measure door to ensure accuracy and find 1 matching doors or two similar doors. The cost of materials is not included in the quote i.e. the quote is for labour only.

had to knock down a small timber shed to access plumbing underneath, done now need to rebuild the shed, 1.30m wide, 4.5m long, have kept most salvageable pieces but need also pavers laid

I have a stone bench top that has some marks on it. Could clean it please any stone masons out there?

We are looking for 5 of these wooden butterfly shelves to be made.

We want someone to rip up the current decking and take away the wood, as it is being replaced with a new deck. Only the decking planks, not the foundations. They are nailed in. The deck is approx 5m x 3m

We are looking for a suitably qualified person to build some furniture for a wine bar undergoing renovations from 4th - 10th Nov in Northcote. Some work can be carried out on site or if you have a work shop we can bring materials to you. The furniture required is as follows: - 14 table tops : using the timber from a very large shelving unit, we are looking to re-purpose the timber into table tops. The timber is high quality Queensland Cyprus. Long and straight 190mm wide x 45mm depth x 2m lengths. We would want the tables made into 600x600 size. We are happy to do the clear sealing of the tables. - 2 x banquets seat roughly 4.5m long. Made from black MDF or chip board. No cushions are required we will source these separate. Standard bench and backrest design would be fine. There may be some further small work to be done with the large amount of left over timber from the shelving. Happy to meet in person to discuss in more detail if required.

I need two sliding doors fitted. Please see photos of design. The dimensions are slightly different so I would need you to visit to measure first. One side is fixed the other is sliding. I want the glass to be good enough to retain heat please. My rough measurements say 137 cm x 194 And 139 cm x 207 Must be white

Building and Installation of shelving in existing cabinetry. 1 x under sink 2x bathroom cabinet 1x pantry (make shelving more useful/accessible) Happy to discuss costs (labour and material). Shelving to be malamine or similar. No rush, just want it done!

Installation of Fisher & Paykel 60cm Single DishDrawer (DD60SCX9) under sink - will include some working with cabinets and, once installed, replacement of cabinet doors to fit.

I need studio shed, garden shed and side of house brought under control. Removal includes lumber, decking, leaves, misc material , garden shed contents, and general junk and cutting back undergrowth around back of studio and side of house.

I've taken the doors and main shelving out of this wardrobe and just want the rest of the frame and metal skirting removed. Also help to get the doors down the stairs. If you can dispose of the components that are removed (including the doors), that's a bonus.

I need a broken window removed, replaced with a 15m thick piece of plywood and a dog door put in it and then it painted white. I can provide the wood but you’ll need to cut it to size as well as install the dog door in it and paint it. If you have wood / paint that will be a bonus.

-Two pre hung doors require adjustment to close properly. -One door requires an architrave. Timber to be provided by me. Fixings to be included in price.

Hello folks, I need some help as I have put my tools in storage as I am in between moving houses. However I have a decking (merbau) that is in need of a restain? It’s gone a bit gray... it hasn’t cracked and can happily be walked on with bare feet - no splinters. I previously used the 45 degree angle system so that there are no visible nails. However I added a new slab and my intention was to continue the decking across the entire slab but as it turns out I never did get around to adding the extra deck. So to rent out the house I need to finish the decking. I have five “aged boards” at home which will be more than enough for the task. And to maybe run an oil over the top to give it a fresh look. I don’t believe it needs to be sanded it should be ok with a quick brush over and up to three boards re-attached. I have already bought the following decking products for the staining. Cabot's Deck Clean Cabot's Aquadeck, applicator See pictures for further information

I have 2 wooden sash widows the tops are fine the frame is fine only the bottom sash’s need replacing ( not sure on the cost to replace the two so I’m hoping to get a quote ) live in Northcote, Vic - I have pics and measurements if you email me I can send these to you

Need help to close off section of pelmet with piece of timber. Material will be provided by me, but will need to be cut to fit. Also need help to insert some insulation in ceiling before closing up section. Approx 1.2m Long

Large built in robe requires disassembly before new carpet is fitted then reassembled in a new room after carpet is finished. Must be out by Friday 26 July and then back in by Tuesday. Majority of screws removed already.