Find experienced local carpenters in East Melbourne

Custom Joinery – Under Staircase Bench & Storage Looking for an experienced joiner/cabinet maker to design, build and install a custom under-stair bench with integrated storage. Scope of works includes: • Measure, manufacture and install a built-in bench cabinet to fully infill the nook under the staircase, finishing flush with nib walls on both sides • Approx. 400mm high bench seat with one row of three large drawers • Drawer fronts in Polytec laminate (Cassentino Beach Woodmatt or equivalent) with clean, handle-less finger-pull detailing • Cabinet to sit at floor level with a 20mm shadow line (no kickboard) • Supply and install a beige upholstered seat cushion suitable for a child reading nook • Plasterboard and finish the underside of the staircase, including stopping, sanding and paint-ready finish to match existing walls High attention to detail required to achieve a seamless, built-in look. Materials, workmanship and finish to a high residential standard. Refer to AI generated image as a guide. Please include examples of similar joinery work and availability to quote on site.

I need someone who does this type of thing for a living. Not a home handy man who wants to give it a go like me. I've just replaced the blades on my HalfCo WoodMaster 2015. I need the blades adjusted so they will cut flush. There are only two blades. I can bring it to you if you are in the Glen Iris 3146 area.

I have an outdoor BBQ unit. There are three tasks - 1. I need someone to repair the cabinet door that has come loose from its hinges. The hinge mounting plates have stripped out of the cabinet frame (see photo). This has been repaired before by the installer and failed. 2. The cupboards need cleaning. 3. I need a way for the doors to be secured closed, so that water/weather does not get inside the cupboards. I am guessing that water damage has caused this.

We have cabinets on site for installation, most rooms need 're work' on the cabinets pull apart, cut put back together than install. There are a few cabinets so 2 people or 3 is recommended. we need 2-3 guys for 3 days on site, we will come out and help guide you but after we will leave you to work.

I am seeking assistance to re-hang our joinery door. It fell off its hinges so I am unsure if there is any permanent damage to the hinges themselves. There is a Bunnings 5mins down the road if new hinges are required. The door is extremely heavy and will likely need two people to rehang.

Paint kitchen joinery including replacing hardware, possibly replacing bench surface

I have a front study room that i'd like wall panels added too on all three walls and ceiling (i've attached a reference photo of what i'm after). I want the entire room covered with this veneer. I have the veneer (58cmx250cm) - these will need to be applied to a thin plywood (or MDF) and then applied to the walls and ceiling. The room is approx. 2.8m long x 2m wide x 2.1m tall. I have attached a photo of the room (currently painted in green).

Open up a hole on the bottom of a drawer from underneath. The hole needs to be large enough to put a hand through.

Please help, I can’t unclip my drawer from Blum laundry unit to be able to plug in new washing machine. Located in Kew. Is there anyone local that could help please?

I have an old fuse box on the wall in my living room, approx 9cm deep/35.3cm wide/ 35.3 cm long. I would like something made to replace this (in white) that could perhaps also incorporates a display box (square shelf) of the same size at the bottom LHS corner. Not sure of the costs, my price is just a guesstimate.

We have left some joinery tools on site at a residential address in Melbourne (Camberwell). We need them picked up and brought to Sydney. (Tools: hand tools, festool track saw, power tools makita, circular saw, planer, jigsaw, hammer drill, impact driver, combi drill, ladder, tressel, screw boxes, laser level, vaccum, drop saw).

One of the panels on our double garage door has come loose. It looks like 2 of the connectors have come apart and need to be replaced. The connectors/joiners need to be replaced.

Experienced registered electrician required to tidy up wiring for wardrobe LED light switch in a few location.

Hinges have come off our joinery and we need assistance reattaching them.

Install Joinery cabinets and drawer fronts, doors etc for Kitchen & Laundry – see attached plans. Install date ideally 27/28 April or asap after – depends on delivery expected around 24 April (TBC) Carcases are delivered to site pre-assembled with face panels , shelves etc loose to be fixed in place on site. Cabinet supplier order list available – too many pages as JPEG to attach to this advert. Face panels, doors, fronts. Kicker faces etc are all 2-pac Lexicon Quarter white satin Sharknose finger pulls throughout (cut & fit rails to carcasses) Kicker boxes as bases (not adjustable feet)

Looking for experienced and skilled professional to complete cabinets assembly and joinery final touches. Must have own tools - Due date: Flexible

We have desk that is attached to a wall joinery unit. The desk top sits under the wall unit top. We ideally don’t want to cut the desk as may want to put it back someday. It is attached underneath through a cupboard. You cannot see the screwsas they are under the top bench. You will need to cut into the inside of the cupboard so we can pull the desk out. - Due date: Before Wednesday, 16 August 2023

Have had to take 2 drawers out and haven’t been able to get them back in properly. Just need someone who knows what they’re doing with these runners. One of them has had the ball bearings fall out. Have captured them all, just need to be reinserted. - Due date: Before Tuesday, 15 August 2023

Require some cabinetry to put doors on open cupboards. It will be 2 sets of 3 doors. The attached photo shows the 2 sets of cupboards. Identical size. 170cm W x 100 H Doors / materials need to be supplied. Laminate could be white or wood grain look - Due date: Flexible and can be done any time in the next few weeks

Need help to reconfigure a kitchen bench top to run align against the wall. Job includes disassembly the bench top and install it again the wall to form a L shape work bench. - require skirting board, timber edge against the wall - we won’t need to disassemble the cabinet It would be ideal to get some help with the floor patching (only a small section - please refer to the photo). The flooring material will be supplied. Please contact me if you require more information. - Due date: Flexible