Find experienced local carpenters in Collingwood

A chippie or cabinet maker to build a wood bench top with a lip, details/measurements in picture attached no need to do on site, I will attach. Made out of a ash or Oak style timber if possible. I will pay for Materials, just let me know additional price. - Due date: Before Friday, 29 September 2023

Install 4-6 hinges to both doors. Full overlay 94 degree hinge, slide on. Routering might be required. Hinges supplied. Mirror doors have been framed and fixed incorrectly. This needs to be rectified. - Due date: Needs to be done on Sunday, 24 September 2023

I am looking for carpenter/handy person to upgrade/redo counter top, high & long tables (window tables), install shelf Countertop needs to be rebuild as it's not in usable condition. As for bench window tables, we will have same long top and same length 2 legs on the sites x 2 (as there are two windows. Note:I will provide all the materials.and need someone that has the right tools and has experience. I need applicants to provide an approximate timeline and cost for the task.

Have the cabinet currently in the area below. I'd like the cabinet either flush and secured against the walls or a new cabinet like the one pictured built from scratch for the area. Would like adjustable shelves inside the cabinet. - Due date: Flexible

I require this piece of hardwood to be cut down to 144cm as it is my desk top and is too long to fit in my new place. I do not have drop/reciprocating/jig or bandsaw to do this. There is a garage space at my place that can be used to cut it; or I can drop it to you (within reasonable walking distance). - Due date: Before Sunday, 30 July 2023

Reverse the fridge doors so that they swing the opposite way. Reversal kit obtained etc. I’d prefer someone with previous experience - Due date: Flexible

custom kitchen drawer approx 46.7cm wide, 14cm high, 50cm deep in the images attached: the drawer would go into the cupboard, above the hinge on the left (the shelf above can be raised in order to fit it) - Due date: Flexible

I need someone who is skilled to source the materials and make a wall mounted bench seat with tables, similar to the images below - Due date: Flexible

Install 4 hinges to both doors. Router the door where hinge part goes 10-11mm in depth. Silicon edges of cabinet and underneath the edges for adhesion to wall.

Hello, I have just ripped apart our kitchen cabinets and need some of the ends put back together / repaired. I still have the existing cabinetry to chop cut and re-attach pieces with. - Due date: Before Saturday, 20 May 2023

Replace wood panel (pull out the rotted box) behind the letterbox also pulled back and brace the top of the corner fence. So it doesn’t split further. - Due date: Before Tuesday, 16 May 2023

I need a progressional to remove the heat stains from pizza box and polish the wooden dining room table I have. There are also scratches that they may have some advice getting removed - Due date: Flexible

Build in a new shelf above laundry and in kitchen cabinet Laundry x2 D660 W1010 W2 625 smaller shelf Ceiling to bottom shelf 980 Kitchen x2 D620 W660 - Due date: Flexible

Measure and quote: Master: - Move x2 drawer+shelf units from master w/r to spare room - build new drawer and shelf units to fit master w/r - add full length hanging space to master w/r Spare room: - build shelves and divider panels to use as broom and NBN router cupboard - Due date: Flexible

Install 4 hinges to both doors. Router the door where hinge part goes 10-11mm in depth. But also need silicone underneath the hinge bit that attaches to doors to ensure water proofness and enough space for hinge bit to sit comfortably. Silicon edges of cabinet and underneath the edges for adhesion to wall. - Due date: Flexible

Looking for a professional repairman. Someone scratched our brand new table top by putting a heavy metal item on jt. Want to repair the scratch if it’s possible. The scratch is roughly 5cm long. It’s a white laminate table top. Please see images. - Due date: Flexible

We have designed and had made the following 6 custom joinery units that have come in flat pack format. Looking for a skilled and experienced person to assist to put them all together. It comes with an assembly guide. Will be there during assembly to assist and would anticipate it would take 2 days to complete. 1 x 900mm wide x 2400mm high broom cupboard. 2 x 2500mm long x 850 high bench with cupboards 2 x 1500mm long x 370mm high open shelf unit 1 x 800mm wide x 2200mm high open shelf unit Must have all tools to complete install and any trimming of panels that is required. Task would include installing, trims, skirting. There are no bench tops for the 2 lower benches. Happy to set agree on an hourly rate as hard to know how long it will take (estimated 2 days). Thanks - Due date: Flexible

Measure, cut and glue shaker moulding to 19 cabinet doors in our kitchen (photos of our kitchen and the moulding style attached). This will need to be done over a few days as we will paint the moulding you cut before it goes on the doors. Thank you! - Due date: Flexible

Need a stainless steel hand basin installed at a restaurant kitchen. Plumbing is there, just need to replace wooden basin to steel. - Due date: Before Thursday, 23 February 2023

Hello, I have just purchased a property and need the kitchen cabinetry renovated asap. The apartment is a small studio in Collingwood and is locate at the entry hallway. Please let me know the costs involved and the time required to do the job. I will attach a before image and desired outcome. Do we have to rip out the existing and start again or is any of it able to be used ? - Due date: Needs to be done on Monday, 20 March 2023