Find experienced local carpenters in Coburg

Cabinet maker required for kitchen/joinery installs. on going jobs casual work when required. hourly rate/day rate negotiable. Must be qualified and have experience in cabinet making/installs

4x4 room (16sqm) 1.8x2.2 laundry (4msq) 2.3x2.3 walk way (6sqm) 3.7x3 kitchen (11sqm)

Located in melbourne ! I Need a loft built for a double bed. To fit inside a room of 3.8 x 3.8 Will pay extrs for materials, time spent installing and a fee for your own tools wear and tear! Something reasonably affortable, fair and im open to creative ideas :)

Please see attached photos. The cabinetry at the top and bottom of the dishwasher has come apart. The screws that stabilise the dishwasher have come out so the dishwasher falls forward when you open it. Experienced cabinet makers (or similar) only please. I’m looking for someone who has specific experience with built in cabinetry repairs. Thanks!

Definitely a job geared towards a cabinetmaker. Will need to cut out for a range hold, rail for finger pull, kick boards to be cut to size and scribed to the floor. The oven carcass will also need work with the rail.

Cabinet Modification for Full-Size Dishwasher Installation Looking for a cabinet maker or handyman to modify our existing kitchen cabinetry to fit a standard full-size dishwasher after our current dishdrawer finally died. The job: * modifying the existing cabinet e.g removal of shelf underneath DishDrawer *cutting the cabinetry and kickboard as required to create the opening for a full size or skinny dishwasher (full length) * Ensuring a neat, professional finish ready for dishwasher installation. Measurements are: H: 87cm (floor to black countertop, incl kickboard) W: 59cm (internal cabinet wall to cabinet wall and width of current dishdrawer) D: 56cm (measured to back wall of adjacent sink cupboard) Kickboard H: 10cm

Cabinet maker or handyman required to reinstall five sliding wardrobe doors across two wardrobes. The doors were removed to allow for floorboard restoration and new skirting installation. Now that these works are complete, the doors need to be reinstalled and adjusted. The doors have adjustable screws for alignment. As the bottom tracks previously sat on carpet, which has since been removed, the tracks may require shimming to raise them slightly and ensure the doors fit and operate correctly. Timing is flexible but prefer it to be done this weekend. Please ensure your quote includes airtasker fees. Note you will need to work alongside painters currently on site. Thank you!

Open to ideas but need to install some thing simple under guttered to close gaps, ideas are use treat pine and plinth boards to create a fascia look

Old timber fascia has been taken down need to supply and install new timber fascia 20mm thick

The cabinet is a 81cm wide x 200cm high IKEA METOD wall cabinet. The cabinet has already been assembled to the stage required for mounting, and the METOD suspension rail has already been cut to size. The cabinet will be mounted to a plastered internal wall in a hallway. There is a staircase on the opposite side of the wall. I am looking for someone to: Locate and verify wall studs Securely fix the suspension rail to the wall Hang and level the cabinet Check that the installation is safe and secure I have all cabinet components ready to go. I have the IKEA instruction booklets available. Location: Coburg Looking to have this completed before Sunday afternoon. Should be a quick job!

Install cabinets from bunning kit and kaboodle

Need to get few cabinets done and bench tops

Three small patching / fixing broken timber jobs. 1. Replace two small 45cm weatherboard panels 2. Replace threshold for garage door (roughly 90cm by 20cm) 3. Patch rotton part of window sill ( roughly 17cm by 7cm)

Quote for Looking for an experienced carpenter/handyman to modify an existing kitchen cupboard section to create space for a dishwasher. Scope of work: Remove internal shelves from current base cabinet Adjust/modify cabinet to fit a standard dishwasher Cut access holes for water hose, drainage and power Ensure cavity is level and suitable for installation Height (mm) 845 mm ,Width (mm) 598 mm, Depth (mm) 600 mm Please bring your own tools.

Current cavity for oven is about 1170mm high and we are replacing with new oven that’s around 890mm high. Want a filler panel and shelf for bottom of cavity to make sure oven appears snug in cavity. White gloss melamine finish for filler panel.

Clear, clean and re-stain back deck and front porch

Need my desktop reduced in size. Currently 2200 x 900 Wanting 1600 x 750

Cutting length and width of timber desk top

Bathroom small renovation Installation of cabinetry: -4 floor - 2 mounted on the wall - Benchtop installation with holes for sinks and one tap - Side panels and bottom panel - 10 handles - Installation only, cabinets provided - Removal old cabinets and sink

Looking for an experienced handyman to complete a few small jobs: 1. Lay laminate floating floor (less than 10sqm). Reattach skirting boards and install a few kitchen kickers. Materials on site. 2. Tile around a pretend fireplace (approx. 1.5m x 30cm) — tiles provided 3. Fix or paint a small roof eave patch (approx. 1.5m x 30cm) with water stains 4. Stain-finish timber kitchen benchtop - stain provided All major materials are supplied except grout, cement, and paint. Would prefer one person to handle all tasks. Flexible on budget — please quote based on experience and availability. Photos available on request. Looking to get started ASAP.