Find skilled builders in Coburg

Wish to construct a pergola to my home that leads to the side porch - see original photo and the suggested AI photo. Dimensions are 8 metres long by 1.3 metres wide. Ideal to wall mount and then have posts behind white fence Painted in white as well? Thank you

I am buying a 2nd hand shed off marketplace - looking for someone to help me assemble it (and possibly dissasemble and move it!) Shed is assembled in Northcote 3070. It will be disassembled for moving. I require someone to reassemble it in Coburg 3058. If possible could you please provide me with price options: 1) quote to reassemble it in Coburg only 3) quote to disassemble it in Northote, then tranport it in your own vehicle, the reassemble it in Coburg External dimensions: 3600mm wide x 1860mmdeep × 2100mm high (Including roof and high point of gabel it’s 3900mm wide x 1870mm deep x 2720mm high) Foundation: 8 x DEKO foundation blocks from Bunnings and joists Front has 3 large panels, Rear has 6 panels (Rear and side panels are interchangeable) Sides each have 3 panels Floor is orange-tongue particle board in 2 pieces lengthways

I am looking for someone to help remove and dispose a simple timber 4m x 3m pergola in my backyard. The pergola consists of a main beam (170x35)slotted between brick walls, five secondary members (smaller than 120x35, and no columns.

Hi James I am looking to purchase a Stratco HH3 shed (3.25m x 3.40m). I am looking for a quote to have it installed. The site is on a bit of a slope so not sure if earthworks are required. I will also need a slab installed (slab will be bigger than shed for surrounds). Are you able to recommend any tradies for slab and earthworks if required? Proposed shed site photo attached. I am not sure of cost so have put in $1000 but happy for you to quote as required. No rush but have not yet ordered shed yet. Happy to discuss and would welcome any advice/suggestions. Thanks Michael Answerth

I'd like the side of the house to have a slim pergola, a timber structure with poly sheets. The length is about 7 meters by 1 meter. I've drawn an idea of the work below. Thanks.

2.1 meters by 1.5 meters shed going onto concrete pad ready to install shed onto http://www.cheapsheds.com.au/yardsaver-garden-sheds-assembly-videos/

We’re looking for an experienced drainage plumber or landscaper to inspect and quote installation of a strip (channel) drain along the side of our house where the driveway slopes inwards. Our restumper recently advised that water is tracking under the house after rain, likely flowing across the driveway toward the subfloor area. We’d like a drainage solution that captures this water and redirects it safely to stormwater drains. Job scope (to be confirmed on inspection): • Cut and remove a narrow section of driveway beside the house • Install a suitable grated strip drain or channel drain • Connect to existing stormwater line or discharge point • Ensure correct fall for water flow • Restore driveway surface neatly once complete Driveway type: Paved/bricked (see photos) Location: [Coburg, VIC] Access: Clear access along side driveway Please quote for works (happy to arrange inspection first). Must have relevant experience in surface or stormwater drainage.

Looking for a qualified installer to build a fence and driveway gate at my mum’s home. Driveway gate (swing or sliding) – electric with remote access preferred, but open to manual option if needed. • Fence and gate made from material that allows us to see out but prevents outsiders from seeing in (e.g. privacy aluminium slats, perforated screen, or similar). • Approx. height: 1.8m (open to recommendations). • Gate should include lock and safety features. • Must supply and install all materials.

I've finished construction of a bike shed, I need someone to anchor the shed to the concrete driveway. It requires around 16 anchors to be driven into the concrete.

Wooden gate installation to our driveway, preferably around 1.8m, extending from the dividing fence to the house side. Painting not required. Please see photos for gate type examples and location.

Concreting required (blinding), ready for pavers to be laid on top. 30 sq. metres Needs to join onto existing concrete, refer pics

Installation of 2 walls and 2 doors. One wall would require a creative solution for natural light. Sound proofing and privacy are important as it will be a clinical space See link & photos for dimensions; https://my.matterport.com/show/?m=eCPhb3oyRGU

Installation of two walls and two doors. One wall requires a creative solution for natural light. Sound proofing and privacy are important as it will be a clinical space See photos and link for room dimensions: https://my.matterport.com/show/?m=eCPhb3oyRGU

We need a new garden shed assembled and bolted down

Change planks, replace laser lights and pergola to be painted

I need a large pile of tree branches and green waste removed from our driveway.

Hi, Hoping someone is able to give me a quote on repairing a small patch on the driveway, Height is around 30 to 40 cm by no more than 20 cm. Located in Coburg area preferably done on Monday.

Need assistance with remedial works on a pergola - built only 8 months ago

Assembly of a flat pack Shed. Shed measures H 1.8m x D 1.07m x L 2.1m. Rivet tool and rivets provided. Instruction sheet provided. Purchased from this site: https://www.greenlife.com.au/products/yardstore-f63-d-garden-shed-2-1m-x-1-07m-x-1-8m

Installation of a flat-packed cedar shed from Stilla. Model is called ‘Birch’ and is 1.92x0.94 metres. Will be laid on slightly sloping paved area so will need leveling. Shed was purchased with heavy duty flooring kit to allow leveling.